Access Transmitters | Alliance Locksmith

Trine – 018-4 – Wireless Transmitter Two Button Transmitter – White

Alliancelocksmith — Fri, 24 May 2024 08:42:51 +0000

Color – White LED indicates operation Transmitter size: 1.4”w x 2.9”h x 0.5”t A-23 Battery Included FCC/IC Approved Must be used with the 017TDC-4 Controller (Not backwards compatible with any other 017TDC/018 Model!)…

Source

Trine – 017TDC-4 – Wireless Controller Rolling Code

Alliancelocksmith — Fri, 24 May 2024 08:42:51 +0000

017TDC-4 — Wireless Controller Rolling Code 500-foot range. 2 Channel Receiver & Transmitter. Independently Programmable A & B Channel. 4, 8, 16 Second Delay or Alternate Action Trigger. Will work with 12 through 30 V AC/DC. Dry Contact Relay rated up to 30V @ 5 Amp Max. Single Pushbutton Program-Erase (for security). Screw Terminal Connections. Up to 8 transmitters per one…

Source

Seco-Larm – 315MHz Pendant RF Transmitter with 2 Button – 3 Channel – Pre-coded.

Alliancelocksmith — Fri, 24 May 2024 06:21:12 +0000

Over 68 billion possible codes LED transmission indicator only appears when buttons are pressed Operates up to 500ft (150m)* RF Anti-scan protection FCC and IC Certified 315MHz (433.92MHz available) Compatible with all 315MHz SECO-LARM receivers Slimline design: 1-1/4″x2-3/16″x5/16″ (31.5x55x8 mm) Replacement batteries available: X-930-096 (CR2032) Patented design *

Source

Seco-Larm – 2-Channel RF Receiver – 11~24 VAC/DC – 315MHz – Two Relays

Alliancelocksmith — Fri, 24 May 2024 06:21:11 +0000

5 Programmable output modes: 4-Second momentary, toggle, latch, validity (receiver outputs for as long as the transmitter button is pressed), 1-second momentary New! 2 Independently programmable channels Compatible with all 315MHz ENFORCER transmitters Use to control garage door opener, house lights, alarm control panel, or other devices via remote control Two Form C dry relay contact…

Source

Seco-Larm – Extended Range Antenna – 315MHz – 1,000 Feet

Alliancelocksmith — Fri, 24 May 2024 06:20:17 +0000

Easily plugs into a connector on the receiver’s motherboard – no extra wiring needed Includes 9-foot cable Double-stick mounting tape included For use with these SECO-LARM RF receivers: SK-910RBQ – Single-channel receiver SK-910RB2Q – Two-channel receiver SK-910R3Q – Three-channel receiver SK-910R4Q – Four-channel receiver Power Supply 5VDC ±10%

Source

Trine – 018-4 – Wireless Transmitter Two Button Transmitter – Black

Alliancelocksmith — Fri, 24 May 2024 06:17:36 +0000

Color – Black LED indicates operation Transmitter size: 1.4”w x 2.9”h x 0.5”t A-23 Battery Included FCC/IC Approved Must be used with the 017TDC-4 Controller (Not backwards compatible with any other 017TDC/018 Model!)…

Source

Seco-Larm – 315MHz Pendant RF Transmitter – w/ 1 Button – 1 Channel

Alliancelocksmith — Fri, 24 May 2024 06:15:18 +0000

Over 68 billion possible codes LED transmission indicator only appears when buttons are pressed Operates up to 500ft (150m)* RF Anti-scan protection FCC and IC Certified 315MHz (433.92MHz available) Compatible with all 315MHz SECO-LARM receivers Slimline design: 1-1/4″x2-3/16″x5/16″ (31.5x55x8 mm) CODEBUMP codehopping models also available Replacement batteries available: X-930…

Source

Seco-Larm – 1 Channel RF Receiver – 11~24 VAC/VDC – 315MHz – Relay Output

Alliancelocksmith — Fri, 24 May 2024 06:15:18 +0000

SLM-SK-910RBQ Compatible with all ENFORCER 315MHz transmitters Use to control garage door opener, house lights, alarm control panel, or other devices via remote control 10A @ 24VDC per channel, NO/NC/COM Frequency 315MHz This revolutionary receiver incorporates: Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals. HIGHER SENSITIVITY for greater operating distances.

Source

Alarm Lock Trilogy – 4-Button Remote Key Fob / Remote for Alarm Lock – Networx

Alliancelocksmith — Fri, 24 May 2024 05:48:43 +0000

Remote release 4 button key fob designed to be used with any existing Networx lock enrolled with a simple keypad program. Must update the firmware of your existing Networx Lock. Also can be used with an RR-RECEIVER to any existing Trilogy Cylindrical Lock, RR-RECEIVER sold separately. Used to wirelessly unlock up to four separate Trilogy Networx series locking devices or locking devices wired…

Source

Alarm Lock Trilogy – Universal Wireless Remote Release Kit – NetworX

Alliancelocksmith — Fri, 24 May 2024 05:46:59 +0000

Universal Wireless Remote Release Kit for all Trilogy Cylindrical models includes the RR-1BUTTON for desk mount applications and RR-RECEIVER which is designed to be installed inside the battery compartment next to the battery pack of any cylindrical Trilogy lock. The RR-RECEIVER connects to the 2 white remote release wires inside the battery compartment and to the black and red battery pack…

Source