Works together with XHORSE VVDI2 Commander Key Programmer

Manufacturer: Xhorse

XHORSE VVDI2 / VVDI 2 Commander Key Programmer Main Test Cable

This is the Main Test Cable only; CANNOT be used alone

Works together with XHORSE VVDI2 Commander Key Programmer

Standard voltage 25.9V

Limited charge voltage 29.4V

Rated Capacity 2500mAh

Power Ra 73.5Wh

Manufacturer: KeylessFactory

Working XHORSE VVDI PROG Programmer

Xhorse OEM AM29FxxxBx-
xxs
-V1.0 Adapter Working VVDI Prog(SOP44)

Read/Write AM29FXXXB series chip (Many ECU types with Flash chip AM29FXXXB)

Package List: 1 socket with 3 different soldering pads.
VVDI Prog Add the following chips need to work with AM29FxxxB Adapter:
AM29F200BB-xxE,
AM29F200BB-xxF,
AM29F200BB-xxS,
AM29F200BT-xxE,
AM29F200BT-xxF,
AM29F200BT-xxS,
AM29F400BB-xxE,
AM29F400BB-xxF,
AM29F400BB-xxS,
AM29F400BT-xxE,
AM29F400BT-xxF,
AM29F400BT-xxS,
AM29F800BB-xxE,
AM29F800BB-xxF,
AM29F800BB-xxS,
AM29F800BT-xxE,
AM29F800BT-xxF,
AM29F800BT-xxS,
AM29F160BBxxE,
AM29F160BBxxF
AM29F160BTxxE,
AM29F160BTxxF options in <1-EEPROM&FLASH>-> (Need AM29FXXXB ADAPTER)
Package:
1*Xhorse XDPG13CH AM29FxxxB for VVDI PROG Programmer

Package List:

1pc x VVDI PROG ECU Reflash Cable

Brand New

Manufacturer: Xhorse

XHORSE VVDI MB TOOL OBD Cable

Package List:

1pc x VVDI MB TOOL OBD Cable

48 chip copy function authorization
XHS-VVDI96BIT
or
XHS-VVDIOBD

VVDI2 4th immobilizer system
Sold Here XHS-VVDI2

ID48 Chip Data Collector for VVDI2

1000 Points or 1 Token

How to: Open the VVDI2 key programmer software menu – member points system and obtain a 48 copy function
XHS-VVDI96BIT
or
XHS-VVDIOBD
Supported types: The 48 chip copy function applies to the 4th Immobilizer system, the supported types include NEC24C32, NEC24C64, NEC24C64 color instrument, A1, A3/TT/R8, Q3, new Tiguan 873B, 883B etc. Functions: In the process of copying a 48 chip, it is required to insert a PIN code and component security bytes from the vehicle, you can select any of the following methods 1) VVDI2 can read out the PIN code from the Engine Control Unit (ECU) via OBDII and CS 2) You will obtain component security bytes and the PIN code It can copy 48 chips, add 48 chips, support 48 All Keys Lost and support smart keys.

Brand New

Manufacturer: Xhorse

VVDI RKE BOX Remote Control Switching Box Support 3V

1. Wiring Description:

Remove the circuit boards in the original remote control, and connect to the main unit as the right picture shows (connect the white wire to buttons, red to the positive, black to the negative)

Note: 3 kinds of remote button: 2-feet, 4-feet, and 5 feet buttons

4-feet and 5-feet buttons: no direction distinction, but it must be soldered at the diagonals

2-feet buttons: no direction distinction, and respectively solder the two feet

original remote control

positive

negative

remote wiring diagram

IMPORTANT:
Do not reverse the power cord on the remote control

2. To get power via OBD or 12V constant power from the car

3. Key/ Remote Matching and Clearing

Matching Steps:

Press SET button on the Host box (in the internal hole at the side of unit), then the buzzer beep twice, to go into the matching state

Press any button on the new remote for a while until the buzzer beep continuously. Key matching is completed.

Repeat the previous two steps to add another new key.

Note:

Up to six keys to match for one Host box; the key matching will fail if more

In the matching state, the buzzer beeps once if the key cannot be detected for more than 10 seconds, and then automatically exit the matching state to go into the normal working state.

Clearing Steps:

Press SET button for a while until the buzzer beep continuously. All the keys matched previously are cleared and return to factory state

Note:

If the key is lost or not to use, you can erase all the keys and then re-add all lost keys to ensure safety.

Buzzer

Key to be added

SET button

4. To add the key embryo and anti-theft chip to the remote control

Package Including:

1pc x VVDI RKE BOX

Brand New

Manufacturer: Xhorse

XHORSE SOP8 Programming Clip & Cable

Package includes:

1pc x XHORSE SOP8 Programing Clip & Cable