Command Access | Alliance Locksmith

Command Access – Low-Energy Cylindrical Clutch Lever Set – Fail Secure – Storeroom – L6 Lever – 11/30VDC – Oil Rubbed Bronze – Grade 1

Alliancelocksmith — Thu, 23 May 2024 23:39:33 +0000

The Command Access CL180 LE series is a low-energy, cost effective cylindrical lock that is ideal for any continuous duty application or condition requiring low surge and hold current. Its unique electronics allow the CL180LE to function much like a motor-driven lockset without the potential problems inherent in motors. The CL180LE will operate with an input voltage between 11-30 volts, eliminating the need to inventory 12 and 24V models. The CL180LE features a standard Built-in Request to exit (REX) switch. This model is a Fail Secure.
Features:

Fail Secure – Outside lever unlocked (EU) electronically.

Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt.

Inside lever is always free for immediate egress.

Low maximum current draw: use more locks on a single power supply.

Low holding current: reliable operation and meets sustainable consideration

Available with Schlage C type keyway

Specifications:

Lock Function:

EU – Fail Secure – Electronically Unlocked – Locks upon Power Loss

Handing:

Non-Handed

Door Thickness:

1-9/16″ to 2-1/8″

Backset:

2-3/4″

Latch:

1″ Throw

Levers:

L6 Lever

Cylinder:

Schlage “C” Keyway

Finish:

613 – Oil Rubbed Bronze

Operating Voltage:

11-30 VDC

Surge Voltage:

400 mA @12V, 200 mA @ 24V

Holding Current:

30 mA

Solenoid Coil Resistance:

159 Ω

Wire Raceway:

3/8″

Certifications:

ANSI/BHMA Meets or exceeds Series Grade 1 requirements
UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Energy Transfer Swing Hinge – Steel Base – 4/26 Gauge – Black

Alliancelocksmith — Thu, 23 May 2024 23:34:36 +0000

The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise and cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights.
Features:

UL-F Listed

Easy installation

4’ lead at no additional charge

Non-conductive wire access cap

5 Knuckle – Standard Weight Steel Base

3-Year Manufacturer Warranty

Specifications:

Amp Draw

1.0 Amps @24VDC Continuous

Bearing Type

Plain Bearing

Contact Rating

In-rush Current N/C and N/O 0.5 A max

Corner Type

Square

Duty Weight/Class

Standard Duty

Electrical Rating

Electrical Switch Rating 50-100 mA, 30VDC

Function

Energy Transfer

Hardware Finish

Black

Height

4-1/2 In.

Hinge Type

Full Mortise Hinge

Knuckles

Mounting Location

Center hinge on door

Pin Type

(NRP) Non Removable

Power Transfer/Wires

4-26 gauge

Tip Style

Standard

Warranty

3 Years
Manufacturer
Limited

Width

4-1/2 In.

Downloads:

Spec Sheet

Instruction Sheet

Command Access – Electrified Cylindrical Clutch Lever Set – Fail Secure – Storeroom – L6 Lever – 12V – Satin Chrome – Grade 1

Alliancelocksmith — Thu, 23 May 2024 23:21:28 +0000

The Command Access CL1 is a high quality grade 1 cylindrical lock with the look and feel our customers have come to expect from leading brands, but at a significantly lower price. The CL1 is an ideal solution for that project where a “brand name” electrified product is not specified or required yet a high quality and economical solution is desired. You can install this lock with the confidence of knowing that the CL1 meets or exceeds the high standards of our other grade 1 modifications and carries the same no hassle 3-year warranty. This model is a Fail Secure.
Features:

Fail Secure – Outside lever unlocked (EU) electronically.

Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt.

Inside lever is always free for immediate egress.

Continuous duty solenoids allow for “continuously on” applications

Plug-in bridge rectifier that allows for an AC or DC power source

Low current draw clutching lever design

Available with Schlage C type keyway

Voltage options – 12V (AC/DC)

Specifications:

Lock Function:

EU – Fail Secure – Electronically Unlocked – locks upon Power Loss

Handing:

Non-Handed

Door Thickness:

1-9/16″ to 2-1/8″

Backset:

2-3/4″

Latch:

1″ Throw

Levers:

L6 Lever

Cylinder:

Schlage “C” Keyway

Finish:

626 – Satin Chrome

Operating Voltage:

12VAC/DC

Amperage:

250 mA

Power Consumption:

3 watts

Solenoid Coil Resistance:

49 Ω

Certifications:

ANSI/BHMA Meets or exceeds Series Grade 1 requirements
UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Power Transfer Hinge Door Loop – Concealed – 6″ Length – Aluminum

Alliancelocksmith — Thu, 23 May 2024 23:08:31 +0000

This patented Concealed Door Loop (CDL) is a low cost method of transferring low voltage power from the door frame to the locking device. Whereas typical door loops are surface mounted and remain constantly visible, the CDL slides into the door and/or frame completely concealing itself when the door is closed.
Features:

Designed for continuous or butt-hinge applications that are either full mortise, half-mortise, or half-surface and have a standard throw.

Available in durable aluminum finish

Easy Installation

Variable mounting locations

Special 1/4” flexible armored conduit

Supports up to 180° swing

Specifications:

Construction:

Special 1/4” flexible armored conduit

Dimensions:

6” x 4”: x .5”

Hole Diameter:

5/8” wide with 6″ of total length

Finish:

Aluminum Finish

Fits:

Up to 2-12GA Wires

Swing:

Supports up to 180° swing

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Guide

Command Access – Power Transfer Hinge Door Loop – Concealed – 6″ Length – Black

Alliancelocksmith — Thu, 23 May 2024 23:08:30 +0000

Designed for continuous or butt-hinge applications that are either full mortise, half-mortise, or half-surface and have a standard throw.

Available in durable black finish

Easy Installation

Variable mounting locations

Special 1/4” flexible armored conduit

Supports up to 180° swing

Specifications:

Construction:

Special 1/4” flexible armored conduit

Dimensions:

6” x 4”: x .5”

Hole Diameter:

5/8” wide with 6″ of total length

Finish:

Black Finish

Fits:

Up to 2-12GA Wires

Swing:

Supports up to 180° swing

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Guide

Command Access – Electrified Cylindrical Clutch Lever Set – Fail Safe – Storeroom – L6 Lever – 12/24V – Optional Finish – Grade 1

Alliancelocksmith — Thu, 23 May 2024 23:08:06 +0000

Fail Safe – Outside lever locked (EL) electronically.

Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt.

Inside lever is always free for immediate egress.

Continuous duty solenoids allow for “continuously on” applications

Plug-in bridge rectifier that allows for an AC or DC power source

Low current draw clutching lever design

Available with Schlage C type keyway

Voltage options – 24V (AC/DC)

Specifications:

Lock Function:

EL – Fail Safe – Electronically Locked – Unlocks upon Power Loss

Handing:

Non-Handed

Door Thickness:

1-9/16″ to 2-1/8″

Backset:

2-3/4″

Latch:

1″ Throw

Levers:

L6 Lever

Cylinder:

Schlage “C” Keyway

Finish:

626 – Satin Chrome

Operating Voltage:

24VAC/DC

Amperage:

150 mA

Power Consumption:

3 watts

Solenoid Coil Resistance:

159 Ω

Certifications:

ANSI/BHMA Meets or exceeds Series Grade 1 requirements
UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Electrified Cylindrical Clutch Lever Set – Fail Secure – Storeroom – L6 Lever – 12/24V – Duronatic Bronze – Grade 1

Alliancelocksmith — Thu, 23 May 2024 23:08:04 +0000

Fail Secure – Outside lever unlocked (EU) electronically.

Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt.

Inside lever is always free for immediate egress.

Continuous duty solenoids allow for “continuously on” applications

Plug-in bridge rectifier that allows for an AC or DC power source

Low current draw clutching lever design

Available with Schlage C type keyway

Voltage options – 24V (AC/DC)

Specifications:

Lock Function:

EU – Fail Secure – Electronically Unlocked – locks upon Power Loss

Handing:

Non-Handed

Door Thickness:

1-9/16″ to 2-1/8″

Backset:

2-3/4″

Latch:

1″ Throw

Levers:

L6 Lever

Cylinder:

Schlage “C” Keyway

Finish:

626 – Satin Chrome

Operating Voltage:

24VAC/DC

Amperage:

150 mA

Power Consumption:

3 watts

Solenoid Coil Resistance:

159 Ω

Certifications:

ANSI/BHMA Meets or exceeds Series Grade 1 requirements
UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Electrified Cylindrical Clutch Lever Set – Fail Secure – Storeroom – L6 Lever – 24V – Satin Chrome – Grade 1

Alliancelocksmith — Thu, 23 May 2024 23:08:04 +0000

Fail Secure – Outside lever unlocked (EU) electronically.

Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt.

Inside lever is always free for immediate egress.

Continuous duty solenoids allow for “continuously on” applications

Plug-in bridge rectifier that allows for an AC or DC power source

Low current draw clutching lever design

Available with Schlage C type keyway

Voltage options – 24V (AC/DC)

Specifications:

Lock Function:

EU – Fail Secure – Electronically Unlocked – locks upon Power Loss

Handing:

Non-Handed

Door Thickness:

1-9/16″ to 2-1/8″

Backset:

2-3/4″

Latch:

1″ Throw

Levers:

L6 Lever

Cylinder:

Schlage “C” Keyway

Finish:

626 – Satin Chrome

Operating Voltage:

24VAC/DC

Amperage:

150 mA

Power Consumption:

3 watts

Solenoid Coil Resistance:

159 Ω

Certifications:

ANSI/BHMA Meets or exceeds Series Grade 1 requirements
UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Electrified Cylindrical Clutch Lever Set – Fail Secure – Request to Exit – Storeroom – L6 Lever – 24V – Satin Chrome – Grade 1

Alliancelocksmith — Thu, 23 May 2024 23:07:38 +0000

The Command Access CL1 is a high quality grade 1 cylindrical lock with the look and feel our customers have come to expect from leading brands, but at a significantly lower price. The CL1 is an ideal solution for that project where a ‘brand name’ electrified product is not specified or required yet a high quality and economical solution is desired. The mode is Fail Secure with Request to Exit Functions
Features:

Fail Secure – Outside lever unlocked (EU) electronically.

Switched power allows outside lever to retract latchbolt.

Inside lever is always free for immediate egress.

Request-to-Exit (REX) devices are used in conjunction with access control systems to ensure that tenants are able to freely and safely exit an area.

Latchbolt retracted by key outside or lever inside.

Continuous duty solenoids allow for “continuously on” applications

Plug-in bridge rectifier that allows for an AC or DC power source

Low current draw clutching lever design

Available with Schlage C type keyway

Voltage options – 24V (AC/DC)

Specifications:

Lock Function:

EU – Fail Secure – Electronically Unlocked – locks upon Power Loss / Request-to-Exit

Handing:

Non-Handed

Door Thickness:

1-9/16″ to 2-1/8″

Backset:

2-3/4″

Latch:

1″ Throw

Levers:

L6 Lever

Cylinder:

Schlage “C” Keyway

Finish:

626 – Satin Chrome

Operating Voltage:

24VAC/DC

Amperage:

150 mA

Power Consumption:

3 watts

Solenoid Coil Resistance:

159 Ω

Certifications:

ANSI/BHMA Meets or exceeds Series Grade 1 requirements
UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Power Transfer Narrow Door Loop – 18″ Length – Duronatic Bronze

Alliancelocksmith — Thu, 23 May 2024 23:07:14 +0000

The Narrow Door Loop (NDL) is a low-cost method of transferring low voltage power from the door frame to the locking device. Narrow Door Loops are commonly used with electric mortise & cylindrical locks, electric exit trims, and latch pullback devices. These are available in 18” lengths in aluminum and duronatic finishes.
Features:

Narrow Surface Mount

Durable Powder Coated Finish

Available in Duronatic Finishes

Pre-drilled Holes in the Base

Flexible Armored Conduit

3/8” Diameter Flexible Conduit

3-Year
Manufacturer
Warranty

Specifications:

Construction:

3/8” Diameter Flexible Conduit

Dimensions:

18” x 4”: x 1”

Finish:

Duronatic Finish

Warranty:

3-Year Manufacturer Warranty

Downloads:
Spec Sheet