Cylinder Housing | Alliance Locksmith

AccuReader – Honda / Acura Ignition Roll-Pin Removal Kit (IRPRK)

Alliancelocksmith — Fri, 24 May 2024 10:20:55 +0000

This LockTech Honda/Acura Ignition Roll-Pin Removal Kit
is designed to remove the roll pin without any damage to the ignition housing or the roll pin. After reinserting the ignition, simply reinsert the roll pin.
Detailed Instructions Below
Honda/Acura Ignition Roll-Pin Removal Kit Detailed Instructions:

Using the application chart (shown below), identify vehicle as having a Type 1 or Type 2 ignition housing.

If Type 2, use the included pointed center punch to back out the ignition headless bolts if necessary.

Using the supplied awl/ice pick, insert the tip into the end of the roll pin and gently move it side to side in all directions. Use ice pick to center the roll pin within the hole.

Using 2 of the 3 color-coded thumb screws, attach the fixture to the front of the ignition housing. Use spacing washers if necessary.

Insert the Black Tee thumb screw into the 1/4-20 tapped hole and snug it up against the ignition cylinder.

Insert a short tube into the brass thumb screw and LIGHTLY snug in place using the set screw. Insert the long tube through the outer tube so that the flared tip is on the threaded end of the screw.

Insert the brass thumb screw assembly into the threaded hole seating the flared tip over the top of the roll pin. Verify the flared end is seated over the roll pin by trying to move the tip side to side.

Thread the brass thumb screw 1-2 full rotations, then lightly tap the back end of the tube inwards to ensure it’s fully seated over the roll pin.

Continue turning the brass thumb screw assembly until it comes to a definite stop. DO NOT OVER-TIGHTEN.

Tighten the set screw ONE FULL ROTATION ONLY.

Loosen the Black 1/4-20 Tee thumb screw.

Unthread the brass thumb screw assembly with roll pin now attached.

If Type 1, be sure to use the ice pick to lift the steering lock tail piece during cylinder removal.

Honda/Acura Ignition Roll-Pin Removal Kit Tips:

After using the ice pick and before installing the fixture, lightly tap on the cylinder itself (not the cylinder housing) with a hammer in the direction of the roll pin to ensure the roll pin is out as far as possible.

Since the roll pin is tapered on the ends, you can use the ice pick placed in the center of the roll pin and tap LIGHTLY to slightly flare out the roll pin to allow for greater “bite”. Be sure to follow tip #1 afterwards to “push” the roll pin out as far as possible.

Honda/Acura Ignition Roll-Pin Removal Kit Application Guide:

Make

Model

Years

Type

HONDA

Accord

1998-2002

2003-2012

Civic

2001-2011

Crosstour

2010-2012

CR-V & CR-Z

2002-2014

Element

2003-2011

Fit

2007-2014

Insight

2000-2006

2010-2014

Odyssey

1999-2004

2005-2013

Pilot

2003-2004

2005-2015

Prelude

1997-2001

Ridgeline

2006-2014

S2000

2000-2009

ACURA

1997-2003

MDX

2001-2006

2007-2013

RDX

2007-2012

RSX

2002-2006

1999-2003

2004-2013

TSX

2004-2014

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

Heavy Duty IC Core Deadbolt – Grade 2 – Satin Stainless Steel – UL Listed

Alliancelocksmith — Fri, 24 May 2024 09:59:52 +0000

Deadbolt Cylinder Housing For IC Core

UL Listed

Thumb-Turn

Fits both
6
and

pins SFIC Cores

Satin Stainless Steel Finish

Limited Lifetime Warranty

** IC Cores Not Included **
WATCH DEMO VIDEO BELOW

Heavy Duty IC Core Deadbolt and IC Core Cylinder Bundle – Grade 2 – Satin Stainless Steel – SC1 – UL Listed

Alliancelocksmith — Fri, 24 May 2024 09:58:31 +0000

DHDD-SS-IC Features:

Deadbolt Cylinder Housing For IC Core

UL Listed

Thumb-Turn

Fits both

6

and

7

pins IC Cores (Choose Below)

Satin Stainless Steel Finish

Limited Lifetime Warranty

KICC Features:

SFIC (Small Format Interchangeable Core)

6 or 7 Pins Available

1 Nickel Control Key

2 Nickel Operating Keys

Pick Resistant

Best “A” Keyway

Keyed Alike Available

Limited Lifetime Warranty

WATCH DEMO VIDEO BELOW

HPC – LC-SFIC – LockCaddy – for Small Format IC Cylinder Keying

Alliancelocksmith — Fri, 24 May 2024 09:48:22 +0000

The
HPC LC-SFIC LockCaddy
is made of tough ABS Material with the highest quality and durability in mind. Designed by a Locksmith for Locksmiths, these tools will improve quality and productivity. They will manage cores, cylinders, and keys from shop to job site.
The LockCaddy System makes re-keying easy by keeping all of your components compartmentalized in these specially-designed caddies. Perfect for pinning, the LockCaddy keeps cores, cylinder housings, pins and more together to get the job done quicker. Stackable to carry with you or mountable to help create the ultimate Keying Station in your shop or vehicle.
Features

Holds Keys, Cores, Cams, Pins, and more

Tweezer Storage

Ideal for Face or Side Stamping

Secures Cores from Shop to Job Site

Stackable for Easy Storage

23 Service Stations

Comes with “Gator” Following Tool

Mortise Housing for Large Format IC Core ( IC Core / LFIC ) – 26D – Satin Silver

Alliancelocksmith — Fri, 24 May 2024 07:09:22 +0000

Schlage Large Format Interchangeable Core Mortise Cylinder

Cylinder Housing for 6-pin Schlage Large Format Interchangeable Core

Solid brass material

Length of cylinder housing for 6 Pins: 39.4mm

Rim Cylinder Housing for Large Format IC Core ( IC Core / LFIC ) – 26D – Satin Silver – SC

Alliancelocksmith — Fri, 24 May 2024 07:09:21 +0000

KLFRH-26D

Schlage Large Format Interchangeable Core Rim Cylinder

Rim Cylinder Housing for 6-pin Schlage Large Format Interchangeable Core

Solid brass material

ASSA – Maximum+ Restricted – Mortise Cylinder – 1-1/8″ – KA – 626 – Satin Chrome

Alliancelocksmith — Fri, 24 May 2024 06:12:13 +0000

ASSA Maximum+ Restricted 1-1/8″ Mortise Cylinder
based on Maximum+ patented key profile. These non UL437 cylinders give customers the flexibility to install a low-cost conventional cylinder in openings that do not require a High-Security lock cylinder. The Maximum+ Restricted cylinder is less expensive providing cost savings where key control is the main feature
Restricted: Has only 1 independent locking mechanism. No Side pins.

Size: 1-1/8″

Finish: 626 US26D – Satin Chrome

CAM: Adams Rite

Includes: 2 Restricted Keys, Duplication Card and Cover Ring

Drill resistant cylinder housing and plug

Case-hardened steel inserts and stainless steel pins

Extremely close tolerances

Can be easily rekeyed in the field

Cylinder housing and plug are made of high-quality brass

Stainless steel top pins

Bottom pins and master pins are nickel silver

Maximum+ Restricted Cylinders Benefits:

Cylinder housing and plug are made of high quality brass
• Stainless steel top pins
• Bottom pins and master pins are nickel silver
• Counter mill in each chamber position to enhance pick resistance
• ASSA’s generous keying capabilities allow over 160,000 change keys under a single master key

Maximum+ Keys Benefits:

• Innovative key design protected by U.S. and international utility patents
• Patented key control offers the ultimate protection from unauthorized duplicate keys
• Top cuts can be generated on standard, quality code cutting equipment
• Special key stamping and custom coining available

Certification:

• ASSA’s patented key systems are legally protected against unauthorized key duplication through rights
granted by the utility patent
• Maximum+ key listed under U.S. Patent number 8,205,473

Warranty:

ASSA warrants its cylinders against defective workmanship or wear resulting from defects for one year
• ASSA warrants that if a key should break under normal usage, ASSA will replace it at no charge

Technical Information:

• High quality nickel silver material
• Key combination is read from tip to bow
• No. 1 cut is deepest, No. 9 is shallowest

ASSA – Maximum+ Restricted – Mortise Cylinder – 1-1/4″ – 626 – Satin Chrome

Alliancelocksmith — Fri, 24 May 2024 06:11:45 +0000

ASSA Maximum+ Restricted 1-1/4″ Mortise Cylinder
based on Maximum+ patented key profile. These non UL437 cylinders gives customers the flexibility to install a low cost conventional cylinder in openings that do not require a High Security lock cylinder. The Maximum+ Restricted cylinder is less expensive providing cost savings where key control is the main feature.
Restricted: Has only 1 independent locking mechanism. No Side pins.

Size: 1-1/4″

Finish: 626 US26D – Satin Chrome

CAM: Yale Style

Includes : 2 Restricted Keys, Duplication Card and Cover Ring

Drill resistant cylinder housing and plug

Case-hardened steel inserts and stainless steel pins

Extremely close tolerances

Can be easily rekeyed in the field

Cylinder housing and plug are made of high quality brass

Stainless steel top pins

Bottom pins and master pins are nickel silver

Maximum+ Restricted Cylinders Benefits:

Maximum+ Keys Benefits:

Certification:

• ASSA’s patented key systems are legally protected against unauthorized key duplication through rights
granted by the utility patent
• Maximum+ key listed under U.S. Patent number 8,205,473

Warranty:

Technical Information:

• High quality nickel silver material
• Key combination is read from tip to bow
• No. 1 cut is deepest, No. 9 is shallowest

ASSA – Maximum+ Restricted – Mortise Cylinder – 1-1/4″ – 605 – Bright Brass

Alliancelocksmith — Fri, 24 May 2024 06:11:22 +0000

ASSA Maximum+ Restricted 1-1/4″ Mortise Cylinder
based on Maximum+ patented key profile. These non UL437 cylinders gives customers the flexibility to install a low cost conventional cylinder in openings that do not require a High Security lock cylinder. The Maximum+ Restricted cylinder is less expensive providing cost savings where key control is the main feature
Restricted: Has only 1 independent locking mechanism. No Side pins.

Size: 1-1/4″

Finish: 605 US3 – Bright Brass

CAM: Yale Style

Includes : 2 Restricted Keys, Duplication Card and Cover Ring

Drill resistant cylinder housing and plug

Case-hardened steel inserts and stainless steel pins

Extremely close tolerances

Can be easily rekeyed in the field

Cylinder housing and plug are made of high quality brass

Stainless steel top pins

Bottom pins and master pins are nickel silver

Maximum+ Restricted Cylinders Benefits:

Maximum+ Keys Benefits:

Certification:

• ASSA’s patented key systems are legally protected against unauthorized key duplication through rights
granted by the utility patent
• Maximum+ key listed under U.S. Patent number 8,205,473

Warranty:

Technical Information:

• High quality nickel silver material
• Key combination is read from tip to bow
• No. 1 cut is deepest, No. 9 is shallowest

ASSA – Maximum+ Restricted – Rim Cylinder – 1-1/8″ – 626 – Satin Chrome

Alliancelocksmith — Fri, 24 May 2024 06:10:56 +0000

ASSA Maximum+ Restricted 1-1/8″ Rim Cylinder
based on Maximum+ patented key profile. These non UL437 cylinders gives customers the flexibility to install a low cost conventional cylinder in openings that do not require a High Security lock cylinder. The Maximum+ Restricted cylinder is less expensive providing cost savings where key control is the main feature
Commonly used on apartment and condominium doors, ASSA rim cylinders are used on vertical deadbolt locks and are also designed for commercial exit and panic devices.
The standard rim cylinder can be easily converted to a mortise cylinder by simply replacing the rim tailpiece assembly with the appropriate cam.
Restricted: Has only 1 independent locking mechanism. No Side pins.

Size: 1-1/8″

Finish: 626 US32D – Satin Chrome

Tailpiece: Horizontal Breakaway Tailpiece

Includes : 2 Restricted Keys, Duplication Card and Rim Cylinder Mount w/ Screws

Drill resistant cylinder housing and plug

Case-hardened steel inserts and stainless steel pins

Extremely close tolerances

Can be easily rekeyed in the field

Cylinder housing and plug are made of high quality brass

Stainless steel top pins

Bottom pins and master pins are nickel silver

Maximum+ Restricted Cylinders Benefits:

Maximum+ Keys Benefits:

Certification:

• ASSA’s patented key systems are legally protected against unauthorized key duplication through rights
granted by the utility patent
• Maximum+ key listed under U.S. Patent number 8,205,473

Warranty:

Technical Information:

• High quality nickel silver material
• Key combination is read from tip to bow
• No. 1 cut is deepest, No. 9 is shallowest