DORMA | Alliance Locksmith https://alliancelocksmith.com Locksmith & security systems Thu, 23 May 2024 10:12:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://alliancelocksmith.com/wp-content/uploads/2021/04/cropped-alliance-ico-32x32.png DORMA | Alliance Locksmith https://alliancelocksmith.com 32 32 DORMA – TS93 – Hydraulic Door Closer – Back Check Function – Regular Arm – Size 1-5 – Push Side Saffit Mounted – Grade 1 https://alliancelocksmith.com/product/dorma-ts93-hydraulic-door-closer-back-check-function-regular-arm-size-1-5-push-side-saffit-mounted-grade-1/ Thu, 23 May 2024 10:10:15 +0000 https://alliancelocksmith.com/?post_type=product&p=259610 Doors equipped with the TS93 will open much easier than doors with rack and pinion closers with track arms. The TS93 is a closer with regular arm operating efficiency and track arm aesthetics. Adjustable delayed action extends the closing cycle to allow unobstructed pass through opening.
Push side installation
When necessary, push side installation provides the benefits of track arm assemblies with the closer mounted to the door and the track mounted to the stop, creating a more tamper-resistant application.
Adjustable Spring sizes for barrier free requirements
The TS9315 will be available with field adjustable spring power from size 1 to 5 for barrier-free requirements.
Hydraulic backcheck
The adjustable backcheck prevents uncontrolled opening of door.
More Information Below:
Specifications:

Available as TS9315 closers for interior and exterior barrier-free requirements (adjustable size 1–5).

Available as TS9356 closers for greater closing force for exceptionally wide, tall, or heavy doors (size 5–6 +50% adjustment).

Adjustable backcheck prevents uncontrolled opening of door.

Adjustable delayed action extends the closing cycle to allow unobstructed pas sage through opening.

SN3 sex nuts supplied standard for 1-3/4″ thick door

Certified to the requirements of ANSI/BHMA A156.4 Grade 1.

UL10C listed for positive pressure.

Meets the requirements of ANSI/BHMA A117.1 and ADA for barrierfree accessibility.

California State Fire Marshall Approved (CSFM).

Downloads:

Brochure

Installation Instructions

Technical Drawing

]]> DORMA – ITS96 – Concealed In Door Closer – Optional Hold Open – Size 1-3 – Non-Handed – Aluminum Painted Finish – Grade 1 https://alliancelocksmith.com/product/dorma-its96-concealed-in-door-closer-optional-hold-open-size-1-3-non-handed-aluminum-painted-finish-grade-1/ Wed, 22 May 2024 18:57:30 +0000 https://alliancelocksmith.com/?post_type=product&p=251732 The ITS96 series offers the optimum solution for applications requiring concealed door controls. It is suited for virtually any door and frame combination in a variety of leaf thicknesses and configurations.

Cam and roller technology

The ITS96 door closer’s unique cam and roller technology meets the challenge of providing the operation and features necessary in a compact design.

Door applications

The ITS96 Series is suitable for interior wood, hollow metal, and aluminum doors and frames. All ITS96 models can be inverted to install the closer body in the frame.  Maximum door opening is approximately 130°.

Certification

The DORMA ITS9613 and ITS9625 are listed by UL and CUL under their continuing reinspection programs. Meets the requirements for UL 10C for positive pressure. California State Fire Marshal (CSFM) approved. Meets the requirements of ANSI/BHMA A117.1 and ADA for barrier-free accessibility.

More Information Below:

Specifications:

Efficient cam and roller design

Rapid decrease in opening force makes doors easy to open, yet provides maximum closing force at the latch

Non-handed

ITS9613 installs in 1-3/4″ thick doors (min); ITS9625 installs in 2″ thick doors (min)

All ITS96 models can be inverted to install the closer body in the frame

Suitable for interior wood, hollow metal, and aluminum doors and frames

ITS9613—Interior doors up to 36″ wide NOT to exceed 125 lb

ITS9625—Interior doors up to 48″ wide NOT to exceed 175 lb. Exterior doors up to 36″ wide NOT to exceed 125 lb

Invisible when door is closed

Adjustable spring force size for ITS9613 is 1–3 and for ITS9625 is 2–5. Adjustable with unit installed

Opening force 5 lb or less for ITS9613 on interior doors where door without closer attached is 1 lb opening force or less

Sweep and latch valve adjustment easily accessible after installation

Optional hold open adjustable between 80° and 120°

Maximum door opening approximately 130°

Cushioned stop position adjustable between 80°–130° (separate limiting stop required for doors in abusive conditions)

Inverted application available. Consult factory for details

Accessory track brackets available for ease of installation or for frames lacking adequate reinforcement.

Downloads:

Brochure

Metal Door Track in Frame Installation Instructions

Metal Frame Track in Door Installation Instructions

Wood Door Track in Frame Installation Instructions

Wood Frame Track in Door Installation Instructions

]]> DORMA – TS9315 – Hydraulic Surface Applied Door Closer – Adjustable Back Check Function – Track Arm – Size 1-5 – Push Side Soffit Mounted – Aluminum Painted Finish – Grade 1 https://alliancelocksmith.com/product/dorma-ts9315-hydraulic-surface-applied-door-closer-adjustable-back-check-function-track-arm-size-1-5-push-side-soffit-mounted-aluminum-painted-finish-grade-1/ Wed, 22 May 2024 11:34:51 +0000 https://alliancelocksmith.com/?post_type=product&p=240888 Representing the pinnacle of door closer systems with its unique cam and roller design. Doors equipped with the TS93 will open much easier than doors with rack and pinion closers with track arms. The TS93 is a closer with regular arm operating efficiency and track arm aesthetics. When necessary, the push-side installation provides the benefits of track arm assemblies with the closer mounted to the door and the track mounted to the stop, creating a more tamper-resistant application. Install the TS93 closer body on the door and the track arm assembly on the stop surface with the supplied bracket for push-side (PT) applications. The TS93 will be non-handed. 

Adjustable Spring sizes for barrier-free requirements

The TS9315 will be available with field adjustable spring power from size 1 to 5 for barrier-free requirements.

Valves

The TS93 will have two separate temperature compensating, noncritical adjustment valves to control sweep and latch closing speeds. 

Adjustable Hydraulic delayed action and backcheck

Adjustable backcheck will take effect at approximately 65° and the adjustable hydraulic delayed action will be effective from
120° to approximately 70°. 

More Information Below:

Features:

Available as tS9315 closers for interior and exterior barrier free requirements (adjustable size 1-5).

Adjustable backchecks prevent uncontrolled opening of the door.

Adjustable delayed action extends the closing cycle to allow unobstructed passage through the opening. 

Optional hold open, adjustable for degree of hold open force. Hold open is selectable on or off.

SN3 sex nuts supplied standard for 1-3/4″ thick door.

UL and CUL listed under their continuing reinspection programs. 

UL10C listed for positive pressure.

Certified to the requirements of ANSI/BHMA A156.4 Grade 1.

Meets the requirements of ANSI/BHMA A117.1 and ADA for barrier-free accessibility.

California State Fire Marshall Approved (CSFM).

689/US28 Finish, Aluminum Painted

Downloads:

Catalog

Installation Instructions

]]>