Electric Power Supplies | Alliance Locksmith

Trine – 5205 – Plug In Type / Tri Volt Transformer (AC) – 8/16/24VAC

Alliancelocksmith — Fri, 24 May 2024 08:42:50 +0000

120 volt primary AC

2”D x 3”H x 2-1/2”W 7oz

Electric Characteristics:

8VAC — 10VA — 1.25 AMPS

16VAC — 10VA — 0.62 AMPS

24VAC — 20VA — 0.83 AMPS

Adams Rite – 4605 – Transformer – Power Supply – 12/24VAC

Alliancelocksmith — Fri, 24 May 2024 08:08:21 +0000

LIST PRICE: $58.00

ADR-4605

The 4605 Transformer
converts 120 VAC to 12/24 VAC. Rated 40Volt-amp output assures sufficient power for electric strike.

Installation Instructions

Camden CX-33 – Advanced Logic Relay – 12/24V AC/DC

Alliancelocksmith — Fri, 24 May 2024 08:02:31 +0000

Camden’s CX-33 is a ‘state of the art’ logic relay designed to support virtually any automatic door application. The CX-33 features 15 operating modes, with sub-modes, and easy programming with large LCD display and push button selection.

Applications:
Programmable modes include up to 3 door sequencing, airlocks, lock-out-relay, fire door in stairwells, and for control of automatic operators in restroom applications, with support of illuminated indicator of occupancy status.

Ideal for most automatic door applications, as well as air lock and other security applications.

Metal Cabinet w/ CX-33 and 2.5 Amp power supply available

15 operating modes, with sub-modes. Selection and configuration with 3 push buttons

Easily sequence multiple inputs with multiple maintain and hold outputs.

Large 3 segment (blue) LED display

Selectable time delays, with delay on input activation

‘Tried and true’ power circuitry ensures outstanding power filtering and surge protection.

Larger terminal strips allow larger wire gauge, or more conductors to be connected.

Clear plastic case provides better protection of circuit board and easy mounting.

12/24V AC/DC

3 year warranty

Specifications:

Voltage:

12 to 30V AC/DC

Current Draw:

105 mA Typical, 320 mA Maximum

Response Time:

.5 Seconds

Display:

Blue LED: 1 Alpha/Numeric and 2 x 7-Segment

Input:

4 x Dry
1 x Wet: min. 4.5V AC/DC

Output:

3 x Form C (SPDT)

Contact Rating:

3 A @ 24 VDC

Temp Range:

-22
°
F to +185
°
F (-30
°
C to +85
°
C)

Electrical Life:

100,000 Operations @ Rated Capacity

Time Delay:

Hold 1 timer:

0-50 Seconds
Delay 1 Timer:

0-15 Seconds
Hold 2 timer:

0-50 Seconds
Delay 2 timer:

0-60 Seconds
Hold 3 Timer:

0-50 Seconds
Delay on Activate:

0-10 Seconds

Dimensions:

2″L x 6″W x 7/8″H
(51mm x 152mm x 22mm)

Mounting:

2 x #6 Screws or Velcro

Spec Sheets
Spec Sheet

Reference Guides

CX-33_Product Comparison

Relay Selection Chart

Manuals
User Manual

Promotion
CX-33_Advanced Logic Relay Presentation

Camden CX-1000/74 – MicroMinder – Ultra Compact Adjustable Timer – 12/24V AC/DC

Alliancelocksmith — Fri, 24 May 2024 07:59:44 +0000

Camden’s ultra compact and affordable CX-1000/74 is a flexible and easy to operate ‘delay on release’ timer. The delay time is adjustable from 1 to 30 seconds via a simple potentiometer.
Applications:

Ideal for control of automatic door operators or de-energizing electrified locks such as strike or magnetic lock. Used where AC and DC operation is required or where an unprotected circuit board timer may be subject to damage.

Ultra compact design

Adjustable delay from 1-30 seconds

Color-coded leads and plastic case

3 year warranty

Specifications:

Voltage:

12/24V AC/DC

Current Draw:

20 mA idle
33 mA operating

Response Time:

.03 Seconds

Input:

N/O dry contact

Output:

Form ‘C’ (SPDT)

Contact Rating:

3 A @ 24 VDC

Electrical Life:

100,000 @ Rated Capacity

Time Delay:

1 – 30 Seconds

Mounting:

Double Sided Foam Tape

Enclosure:

Black Styrene Plastic

Spec Sheets
Spec Sheet
Reference Guides
Special Purpose Products Cross Reference
Manuals

User Manual

Wiring Diagram

Camden CM-43LP – Surface Box – Shallow Depth – Flame/Impact Resistant Black Polymer ABS

Alliancelocksmith — Fri, 24 May 2024 07:58:26 +0000

Camden offers the industry’s most extensive range of ABS plastic and metal boxes, enclosures and trim rings for flush, semi-flush and surface mounting. ABS plastic models are flame and vandal resistant and are ideal for use with wireless door control transmitters. This box
CM-43LP
is ABS Plastic model and Flame/Impact Resistant Black Polymer.

Narrow, single gang, double gang, and round boxes/enclosures, in a variety of configurations

Surface and flush mounting options

Plastic models are constructed of sturdy flame-proof and UV stabilized ABS

Stainless steel enclosures provide attractive mounting options for our stainless switches

Offset models will fit on door jambs or sidelights

Option for Aura illuminated push plate switch enclosures

Camden offers a variety of box sleeves and trim rings for special installation requirements

Download:
Spec Sheets
Spec Sheet
Manuals
User Manual

Camden CX-PS13 V3 – Variable Output Linear Power Supply

Alliancelocksmith — Fri, 24 May 2024 07:57:07 +0000

Camden’s low cost CX-PS13 linear power supply is designed to provide regulated low voltage power for electrified locks, MProx
card access systems, washroom control packages and other electronic devices. A 120 VAC transformer with a 6 to 26 VAC output is required.

Applications: Recommended for use with electric strikes

Low cost linear power supply

Compact board-only design

Self-resetting smart fuse protection

Input voltage: 6-26 VAC, depending on output voltage selected

Input voltage transformer required, see manual for specification

3 year warranty

Specifications:

Voltage:

6-26 VAC

Output Voltage:

6, 12, 24 VDC Selectable or
2-24 VDC (if ADJ is selected)

Output Protection:

PPTC Resettable Fuse

Output Power:

800 mA, 200 mA Charging Current

Ripple

Efficiency:

12 VDC = 85%
24 VDC = 90%

Dimensions:

2-3/4″L x 1-1/2″W x 1-3/4″H
(69mm x 38mm x 46mm)

Manuals
User Manual

Seco-Larm – 12VDC Plug-in Transformer

Alliancelocksmith — Fri, 24 May 2024 06:15:16 +0000

Features:

Regulated 2.0A

Use in a wide variety of applications including CCTV, access control, and security

Sideways plug for easy use with power strips

Universal 100-240 VAC input. Regulated 12VDC output

4ft (1.2m) cord, 2.1mm plug (positive center)

Low power consumption

Download Datasheet

KERISYS – PXL-500 Tiger II Controller for Wiegand Type Readers

Alliancelocksmith — Fri, 24 May 2024 06:13:02 +0000

Keri’s PXL-500 Tiger II Controller
hardware platform provides sophisticated access control solutions for up to 256 doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture allows Keri to offer the system hardware at a lower cost compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of installation. The system is managed by Keri’s Doors32 software or Doors.NET software, with Doors.NET being recommended for all new installations.
More Information Below
The PXL-500 itself contains all the input/output functionality necessary to manage a single door (Lock Relay, Door Sense, Request to-Exit, and two reader inputs) as well as provide an alarm output. Each controller has an RS-485 port for connection to other PXL-500’s (up to 128 per network) and an RS-232 serial port for connection to a PC which communicates with the first PXL-500 on the network. The PXL-500’s two reader inputs can be configured for any Wiegand-compatible device

Specifications

Size (Enclosure):

13” H x 9” W x 4” D
(33.15 cm x 22.95 cm x 6.35 cm)

Weight (In Enclosure):

4.36 lbs (1.99) kg

Size (PC Board) PXL-500:

5.6” H x 6.6” W x l.6” D
(14.28 cm x 16.83 cm x 2.55 cm)

Size PXL-500 with optional SB-593:

5.6” H x 6.6” W x 1.8”D
(14.28 cm x 16.83 cmx 4.59 cm)

Power Requirements (max):

+12 VDC @ 125mA (PXL-500)
add 375mA for optional SB-593

Inputs PXL-500:

Door Sense
Request to Exit
Auxiliary/External Time Zone
Card Reader (2), A & B

Outputs PXL-500:

Form C Lock Relay (3 Amp)
Form C Alarm Relay (3 Amp)
RS-232 Serial Port (DB-9M)
Output for Optional LCD Display

Buffer Capacity:

65,000 Cardholders
3,600 Events

Temperature/Humidity:

32°F to 140°F
(0°C to 60°C)
0-90% Non Condensing

Communication:

Between Controllers:
RS-485, 9600 Baud
PC to Master: RS-232

Lithium Battery:

5 Years Memory Retention

KERISYS – SB-593 Satellite Expansion Board for Tiger II PXL-500 Controller Wiegand Type Readers

Alliancelocksmith — Fri, 24 May 2024 06:12:37 +0000

The SB-593 Satellite Expansion Board
plugs directly onto the
Tiger II PXL-500
to provide an additional 8 general purpose inputs and 4 general purpose outputs. With a simple jumper setting, two of the inputs and two of the outputs are configured to economically manage a second door.
Note
this item requires the
Tiger II PXL-500
to work. It is an expansion board to expand the amount of doors that can be controlled for the PXL-500
More Information Below
Diagram

See Diagram below for the PXL- 500 with the SB-593 expansion board installed
Download
Quickstart Guide

KERISYS – KPS-3 – Power Supply with Enclosure – 2.8AMP Single Output with Battery Charger (For Back-up Battery)

Alliancelocksmith — Fri, 24 May 2024 06:12:15 +0000

Keri’s KPS-3 Power Supply
provides an open frame power solution, with an ultra compact footprint, providing your design with more space and efficiency. This is the power supply with full enclosure and power cables

Specifications

Size

With enclosure: 205*180*90mm

Without enclosure: 103.4*62*37mm

Weight

With enclosure: .95lbs (.42kg)
Without enclosure: 3.65lbs (1.66kg)

Output

DC Voltage: CH1 – 13.8V, 2.8A,
CH2 (Battery) – 13.8V, 1.5A
Current Range: CH1 – 12-15V,
CH2 – N/A
Power: 59.34W
Voltage Tolerance: +/- 1.0%

Input

Voltage Range: 90-264VAC
Frequency Range: 47-63Hz
Effiency: 84%
AC Current: 1.6A/115VAC,
1A/230VAC
Inrush Current: Cold Start
30A/115VAC, 60A230VAC

Protection

Overload: 105-150% Rated Power
Protection Type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage: CH1 – 14.49 ~18.63V
Protection Type: Hiccup mode, recovers automatically after fault condition is removed
Battery Cut Off: 10.5 +/- 0.5V

Environment

Working Temp: -20 ~ +70
deg C
Working Humidify: 20~90%
RH non-condensing
Storage Temp. Humidity:
-20 ~ +85 deg C, 10~95% RH
Temp Coefficient: ± deg C
0.03%/
(0~50 ) on CH1 output
Vibration: 10 ~ 500Hz, 2G
10min./1cycle, 60min. each
along X, Y, Z axis

Safety & EMC

TUV EN60950-1 approved
Withstand Voltage:
I/P-O/P:3KVAC I/P-FG:2KVAC
O/P-FG:0.5KVAC
Isolation Resistance: I/P-O/P,
I/P-FG, O/P-FG:100M Ohms /
500VDC / 25 / 70% RH
EMC Emission: Compliance
to EN55022 (CISPR22) Class B,
EN61000-3-2,-3
EMC Immunity: Compliance
to EN61000-4-2,3,4,5,6,8,11,
EN55024, light industry level,
criteria A

Enclosure

Enclosure Included

Protections

Short circuit / Overload / Over voltage

Battery

Battery low protection / Battery reverse polarity protection by fuse

Alarm

Alarm signal for AC OK and Battery Reverse Low

Cooling

Air Convection

PreTesting

100% full load burn-in test

Warranty

2 year manufacturer warranty

Download
Data Sheet