ADR-4300-30-101-313

The Steel Hawk® 4300 Electrified Deadlatch
is a non-handed, narrow backset,electrified deadlatch designed for easy integration with access control systems. The 4300 Electrified Deadlatch seamlessly combines electrified locking hardware with access control while working within standard narrow stile aluminum entrance door preparations.

Always operable from the inside via handle or paddle device. Entry via keyed mortise cylinder or access control device such as keypad or card reader. Fail secure lock with optional form “C”latch status monitor. The standard fail secure 4300 Electrified Deadlatch operates on 12, 16, or 24 VDC power and is rated for continuous duty.

Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS® Deadlocks or Adams Rite 4500 and 4900 Deadlatches. 1-3/4″ [44.5 mm] minimum door thickness required.

More Details Below

Features

Cylinder Backset

1-1/8″[28.6 mm]

Case

Steel with corrosion-resistant plating. Measures 15/16″ x 5-13/16″ x depth [23.8 mm x 147.6 mm x depth]. Depth varies by backset.

Latchbolt

Stainless steel. Measures 5/8″ x 1″ x 5/8″[15.9 mm x 25.4 mm x 15.9 mm] throw.

Auxiliary Bolt

All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry. Faceplate Measures 1″ x 6-7/8″ [25.4 mm x 174.6 mm]. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.

Strike

4304 no-cutsurface mounted strike for easy retrofits.

Voltage

Field-selectable to match power source of 12, 16, or 24 VDC. Current Draw/Amps 0.44A at 12VDC 0.458A at 16VDC
*0.23A at 24VDC* Required 16 VDC adapter (P/N VA 7400-16VDC)

Download:

Overview Brochure

Installations Instructions & Templates

Features

Cylinder Backset

31/32″ [24.6 mm]

Case

Steel with corrosion-resistant plating. Measures 15/16″ x 5-13/16″ x depth [23.8 mm x 147.6 mm x depth]. Depth varies by backset.

Latchbolt

Stainless steel. Measures 5/8″ x 1″ x 5/8″[15.9 mm x 25.4 mm x 15.9 mm] throw.

Auxiliary Bolt

All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry. Faceplate Measures 1″ x 6-7/8″ [25.4 mm x 174.6 mm]. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.

Strike

4304 no-cutsurface mounted strike for easy retrofits.

Voltage

Field-selectable to match power source of 12, 16, or 24 VDC. Current Draw/Amps 0.44A at 12VDC 0.458A at 16VDC
*0.23A at 24VDC* Required 16 VDC adapter (P/N VA 7400-16VDC)

Download:

Overview Brochure

Installations Instructions & Templates

Features

Cylinder Backset

1-1/8″ [28.6 mm]

Case

Steel with corrosion-resistant plating. Measures 15/16″ x 5-13/16″ x depth [23.8 mm x 147.6 mm x depth]. Depth varies by backset.

Latchbolt

Stainless steel. Measures 5/8″ x 1″ x 5/8″[15.9 mm x 25.4 mm x 15.9 mm] throw.

Auxiliary Bolt

All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry. Faceplate Measures 1″ x 6-7/8″ [25.4 mm x 174.6 mm]. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.

Strike

4304 no-cutsurface mounted strike for easy retrofits.

Voltage

Field-selectable to match power source of 12, 16, or 24 VDC. Current Draw/Amps 0.44A at 12VDC 0.458A at 16VDC
*0.23A at 24VDC* Required 16 VDC adapter (P/N VA 7400-16VDC)

Download:

Overview Brochure

Installations Instructions & Templates

Features

Cylinder Backset

1-1/2″
[38.1 mm]

Case

Steel with corrosion-resistant plating. Measures 15/16″ x 5-13/16″ x depth [23.8 mm x 147.6 mm x depth]. Depth varies by backset.

Latchbolt

Stainless steel. Measures 5/8″ x 1″ x 5/8″[15.9 mm x 25.4 mm x 15.9 mm] throw.

Auxiliary Bolt

All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.

Faceplate

Measures 1″ x 6-7/8″ [25.4 mm x 174.6 mm]. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.

Strike

4304 no-cut surface mounted strike for easy retrofits.

Voltage

Field-selectable to match power source of 12, 16, or 24 VDC. Current Draw/Amps 0.44A at 12VDC 0.458A at 16VDC
*0.23A at 24VDC* Required 16 VDC adapter (P/N VA 7400-16VDC)

Download:

Overview Brochure

Installations Instructions & Templates

Features:

Concealed door position monitor switch included

Mortises into side jamb and hinge edge of door

Handed – Specifiy LH or RH

For use with 3/4″ offset pivot sets

UL listed for use on 3-hour fire rated doors –
Standard

Heavy duty stainless steel needle bearings

Stainless steel base material

Downloads:
Spec Sheet

Features:

Provides electrical power transfer from the frame to the door

(8) 30 AWG Wires

Concealed door position monitor switch included

Mortises into side jamb and hinge edge of door

Handed – Specify LH or RH

U
L listed for use on 3-hour fire rated doors

Heavy duty stainless steel needle bearings

Stainless steel base material

Downloads:
Spec Sheet

Features:

Provides electrical power transfer from the frame to the door

(8) 30 AWG Wires

Mortises into side jamb and hinge edge of door

Handed – Specify LH or RH

For use with with 3/4″ offset pivot sets

Helps maintain door alignment

UL Listed for use on 3-hour fire rated doors –
Standard

Heavy duty stainless steel needle bearings

Stainless steel base material

Average weight per unit = 3 lbs

Downloads:
Spec Sheet

Features:

Concealed magnetic monitor switch and Thru Wires included

Walking beam top piovt for center hung bottom pivot or floor closer

Heavy Duty

Jamb leaf mortises in header

Door leaf mortises into top of the door

Dress pleate provided for jamb portion

Non-handed

Pivot point must be plumb with pivot point oat the bottom of door

Downloads:
Spec Sheet

Features:

Conceald magnetic monitor switch and Thru Wires included

For use with 0370 bottom pivot when door height is in excess of 104″

Extra Heavy Duty

Jamb leaf mortises in header

Door leaf mortises into top of the door

Dress plate provided for jamb portion

Non-handed

Pivot point must be plub with pivot point at the bottom of door

Downloads:
Spec Sheet

Features:

Provides electrical power transfer from the frame to the door

(8) 30 AWG Wires

Mortises into side jamb and hinge edge of door

Handed – Specify LH or RH

For use with with 1-1/2″ offset pivot sets

Helps maintain door alignment

UL Listed for use on 3-hour fire rated doors –
Standard

Heavy duty stainless steel needle bearings

Stainless steel base material

Average weight per unit = 3.25 lbs

Downloads:
Spec Sheet