1x Cable LAN001

1x Cable CAN001

1x Cable CAN002

Cable functions:
LAN001:
– Connects to Tesla port X861 (located behind the instrument cluster) to activate factory mode (instrument cluster must be disassembled)
– Connects to Tesla port X863 (located below the central control screen) for diagnostics of post-2015/Sept vehicles.
– Connects to Tesla port X863 (located to the left of the instrument cluster) for diagnostics pre-2015/Sept vehicles.
CAN001:
– Connects to Tesla port X437 (located below the central control screen) for diagnostics of post-2015/Sept vehicles.
CAN002:
– Connects to Tesla port X437 (located below the central control screen) for diagnostics of pre-2015/Sept vehicles.

Compatible with all EV and Plug-in Hybrid Vehicles

Contemporary Design, Dark Gray

Separate holster and cable management

Autel Charge App enables remote start, stop, monitoring and scheduling

Specially designed for Indoor or Outdoor use

Wi-Fi / Bluetooth / Ethernet / CAN / RS485 connectivity

Three year limited manufacturer warranty

Specifications

INPUT/OUTPUT POWER RATING & CURRENT

9.6kW (240V AC*40A) Output Amperage Adjustable Via Mobile App, From 6A To 40A

INPUT/OUTPUT VOLTAGE

208V±15%, 60Hz

NETWORK TYPE

L1/N+PE

CONNECTOR TYPE

SAE J1772, 25ft (7.5m)

GROUND FAULT DETECTION

20mA CCID

PROTECTION

Overcurrent, Overvoltage, Undervoltage, Integrated Surge Protection

POWER MEASUREMENT ACCURACY

+/- 1.0% From 1% To Full Scale

POWER CORD

NEMA 14-50

ENCLOSURE RATING

NEMA 4

OPERATING TEMPERATURE RANGE

-40°F ~+131°F (-40°C ~+55°C)

STORAGE TEMPERATURE RANGE

-40°F ~+185°F (-40°C ~+85 °C)

MOUNTING

Wall Or Floor Using A Pedestal

DIMENSIONS (H×W×D)

13x7x3in (336x187x85mm)

WEIGHT TOTAL

Ranges Between 13lbs. (5.9 kg) – 15.9 lbs. (7.2 kg) Based On Model

STATUS INDICATION

LED/APP

USER INTERFACE

Autel Charge APP; Autel Charge Cloud

CONNECTIVITY

Bluetooth, Wi-Fi, Ethernet, CAN, RS485 (For Energy Meter Connection)

COMMUNICATION PROTOCOLS

OCPP 1.6J (Can Be Upgraded To OCPP 2.0.1 Later)

USER AUTHENTICATION

APP, AutoStart, RFID Card

Downloads

Spec Sheet

Installation Guide

Installation And Operation Guide

Features and benefits:

Advanced diagnostics for U.S., European, and Asian electric, gas and diesel, and hybrid vehicles

Rapid analysis of EV high-voltage system including the ability to read and erase codes and view live data

Comprehensive diagrams of the high-voltage system block, components, and sockets; Step-by-step system disassembly instructions and probe and cabling connection instructions.

State of Charge and State of Health analysis for true battery condition

Perform battery analysis via OBDII port, specialty cables, and jumpers

Automatic system and software updates with real-time push message notifications via the internet

Interactive Data Logging sessions enable direct contact with Autel Support for first-hand troubleshooting of diagnostic bugs and error

One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well-organized

Cloud-based Data Manager saves customer and vehicle records, scanner data, and technician notes

Specifications:

Operating System

Android 10.0

Processor

Qualcomm 660 Octa-core Processor (2.2GHz Quad-core A73 + 1.8GHz Quad-core A53)

Memory

4GB RAM & 128GB On-board Memory

Display

9.7-inch TFT-LCD with 1536 x 2048 resolution & capacitive touch screen

Connectivity

Dual Wi-Fi (802.11 a/b/g/n/ac 2×2 MIMO)

BT V5.0 + BR/EDR

GPS

USB 2.0 (2 USB TYPE-A ports and a Mini USB port)

HDMI 2.0

SD Card (Support up to 256GB)

Camera

Rear: 16 Megapixel, Autofocus with Flashlight

Front: 16 Megapixel

Sensors

Gravity Accelerometer, Ambient Light Sensor (ALS)

Audio Input/Output

Microphone

Dual Speakers

3-Band 3.5 mm stereo/standard headset jac

Power and Battery

15000mAH 3.8V lithium-polymer battery

Charging via 12V AC/DC power supply with the temperature between 0°C and 45°C

Input Voltage

12V/1.3A Adapter

Operating Temperature

0 to 50°C (32 to 122°F)

Storage Temperature

-20 to 60°C (-4 to 140°F)

Dimensions(W x H x D)

304.4 mm (11.98″) x 227.8 mm (8.97″) x 42.5 mm (1.67″)

Weight

1.66kg (3.66 lb.)

Protocols

DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can(GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART with Clock, BMW DS2, BMW DS1, SAE J2819 (VAG KW81), KW82, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2)

Accessories:

Downloads:

Quick Guide

Autel USA Tech Support: 855-288-3587

Compatible with all EV and Plug-in Hybrid Vehicles

Contemporary Design, Silver

Separate holster and cable management

Smart Charger Capabilities with Autel Cloud Charging Portal

Specially designed for Indoor or Outdoor use

Wi-Fi / Bluetooth / Ethernet / CAN / RS485 / 4G connectivity

Three year limited warranty

Specifications

Connector Type

SAE J1772

Cable Length

25′

Maximum Current

50Amps I 12kW

Input Cord

Hardwired

Color

Silver

Dimensions

7.36”W x 13.23”H x 3.35”D

Enclosure Rating

NEMA 4

Status Indication

LED/APP

The MaxiCharger Home 40A AC Plug-In EV Charger is a 240V-40 Amp Level 2 Smart Charger compatible with all EV and Hybrid Plug-in vehicles. It features a sleek contemporary design in dark gray and is installable indoors or outdoors.
The MaxiCharger Home 40A offers adjustable charging up to 40 Amps and features a 25ft long Universal (J1772) Charging Cable, NEMA 14-50 plug, and in-body holster.

Features

Compatible with all EV and Plug-in Hybrid Vehicles

Contemporary Design, Dark Gray

In-body holster and cable management

Autel Charge App enables remote start, stop, monitoring and scheduling

Specially designed for Indoor or Outdoor use

Wi-Fi / Bluetooth / Ethernet / CAN / RS485 connectivity

Three year limited warranty

Specifications

INPUT/OUTPUT POWER RATING & CURRENT

9.6kW (240V AC*40A) Output Amperage Adjustable Via Mobile App, From 6A To 40A

INPUT/OUTPUT VOLTAGE

208V±15%, 60Hz

NETWORK TYPE

L1/N+PE

CONNECTOR TYPE

SAE J1772, 25ft (7.5m)

GROUND FAULT DETECTION

20mA CCID

 PROTECTION

Overcurrent, Overvoltage, Undervoltage, Integrated Surge Protection

POWER MEASUREMENT ACCURACY

+/- 1.0% From 1% To Full Scale

POWER CORD

NEMA 14-50

ENCLOSURE RATING

NEMA 4

OPERATING TEMPERATURE RANGE

-40°F ~+131°F (-40°C ~+55°C)

STORAGE TEMPERATURE RANGE

-40°F ~+185°F (-40°C ~+85 °C)

MOUNTING

Wall Or Floor Using A Pedestal

DIMENSIONS (H×W×D)

13x7x3in (336x187x85mm)

WEIGHT TOTAL

Ranges Between 13lbs. (5.9 kg) – 15.9 lbs. (7.2 kg) Based On Model

STATUS INDICATION

LED/APP

USER INTERFACE

Autel Charge APP; Autel Charge Cloud

CONNECTIVITY

Bluetooth, Wi-Fi, Ethernet, CAN, RS485 (For Energy Meter Connection)

COMMUNICATION PROTOCOLS

OCPP 1.6J (Can Be Upgraded To OCPP 2.0.1 Later)

USER AUTHENTICATION

APP, AutoStart, RFID Card

Downloads

Spec Sheet

Installation Guide

Installation And Operation Guide

Compatible with all EV and Plug-in Hybrid Vehicles

Contemporary Design, Dark Gray

Separate holster and cable management

Autel Charge App enables remote start, stop, monitoring and scheduling

Specially designed for Indoor or Outdoor use

Wi-Fi / Bluetooth / Ethernet / CAN / RS485 connectivity

Three-year limited warranty

Specifications

Connector Type

SAE J1772

Cable Length

25′

Maximum Current

50Amps I 12kW

Input Cord

Hardwired

Color

Dark Gray

Dimensions

7.36”W x 13.23”H x 3.35”D

Enclosure Rating

NEMA 4

Status Indication

LED/APP

Includes EVDiag Box, Adapters for BMW, Tesla, VW and Breakout Leads

Includes Carrying Case

Compatible with Ultra series products to perform Battery Pack diagnostics

State of Charge and State of Health analysis for true battery condition

Downloads

Quick Reference Guide

Autel USA Tech Support: 855-288-3587

Compatible with all EV and Plug-in Hybrid Vehicles

Contemporary Design, Dark Gray

In-body holster and cable management

Autel Charge App enables remote start, stop, monitoring and scheduling

Specially designed for Indoor or Outdoor use

Wi-Fi / Bluetooth / Ethernet / CAN / RS485 connectivity

Three-year limited warranty

Specifications

Connector Type

SAE J1772

Cable Length

25′

Maximum Current

50Amps I 12kW

Input Cord

Hardwired

Color

Dark Gray

Dimensions

7.36”W x 13.23”H x 3.35”D

Enclosure Rating

NEMA 4

Status Indication

LED/APP

TOPDON’s PulseQ is the first of TOPDON’s EV charging stations. Offering versatility, adaptability, and smart technology to users, the PulseQ makes EV charging widely accessible. An SAE J1772 (Type 1) plug makes the PulseQ compatible with most American AC electric vehicles, eliminating most brand barriers to electric vehicle owners. The compact design and multiple mounting options save space in garages; mount the PulseQ outside to prevent taking up interior space. The charging station’s interface can be accessed and adjusted through an app to set charging sessions during off-hours and to monitor the charging process

Features

Expanded Compatibility With SAE J1772 (TYPE1) Connector

Level 2 Charger With UL Certification

Work Easier With Intuitive App

Plug-and-Play & App Control

Compact Design & Easy Installation

Made with flame-retardant materials

The PulseQ is equipped with multiple safety features to ensure safety under any circumstance.

The PulseQ EV Charger comes with a rugged charging cable made of PVC and copper

Specifications

Charging Mode

APP-controlled & Plug and Play

Indicator Lights

4 LED Lights: standby, charging, fault, and network

AC Power Input/Output Voltage

Level 2 AC-208-240V

Adjustable Current

6-40A

Rated Frequency

50/60 Hz

Plug

NEMA 14-50

Connector Type

SAE J1772 (Type 1)

Box Dimensions

12.2 x 8.6 x 3.7 inches (310 x 220 x 95 mm)

Standard Cable Length

16.4 ft. (5 m)

Optional Cable Length

24.6 ft. (7.5 m)

Weight

15 lbs. (7 kg)

Working Temperature

-22 ~ 131℉ (-30 ~ 55℃)

Storage Temperature

-40 ~ 167℉ (-40 ~ 75℃)

Enclosure

PC + ASA

Cable

PVC + Copper

Video:

Downloads:

Spec Sheet

Autel Academy is the go-to destination for in depth Autel tool and software training. Register today for in-person classroom and comprehensive hands on automotive diagnostic, repair, service, ADAS and EV instruction. Courses are held at the Autel North America Training Facility in Port Washington, New York. Meals are included, and hotel accommodations provided if needed.

This Ticket entitles you take any one of the 2 Day EV Courses .Take the Training whenever works for you!

Choose from 2 different time slots listed on Autel Academy below  or at the Autel website 
here
 
after you receive your ticket:

Transitioning To EV: Service And Maintenance Training:

With the influx of Hybrids, Plug-in hybrids, and Battery electric vehicles appearing in service bays across the country, the opportunity to become your area’s go-to EV repair shop has never been higher.
After achieving a thorough understanding of electric drive components and circuitry, Autel Academy attendees will apply what they’ve learned on live electric drive vehicles. Trainees will master proven “go-to” PIDs with real life examples of when and why they should be used to efficiently and accurately diagnose several types of common EV issues. Trainees will also learn how to utilize various forms of EV related tools such as insulation testers, class 3 meters, scan tools, and lab scopes so that they can achieve the test results needed.

Instructor: 
Expert Autel EV Technician

Some of the Topics that you can expect to cover in the 2 day EV Training:

EV and Hybrid Pattern Failures

How an electric drive vehicle works

Servicing electric drive vehicles

Utilizing HV tools in diagnostics

EV repair shop equipment & safety

Using datastream for diagnosing various complaints

Diagnosing & Servicing HV battery issues, charging complaints, MG issues, inverter/converter issues, on-board charger issues

Hands-on activities with multiple systems

After your purchase please select a date from the list below and use your redemption code to finalize your registration:

October 3-4
December 19-20

Travel & Accommodation Details:

TRAVELING TO NEW YORK

Travel to New York will not be provided.
If you are traveling by air, there are two major airports within driving distance of the Autel Academy:
JFK International Airport
and
LaGuardia International Airport.

If you are traveling by train, the Autel Academy is a short car ride from the Port Washington stop of the Long Island Rail Road.

Autel Academy Training Facility
Address: 36 Harbor Park Dr, Port Washington, NY 11050
Phone: (855) 288-3587

HOTEL ACCOMMODATIONS ARE INCLUDED

If you elect for the hotel accommodations, a stay at the Hilton Garden Inn at Roslyn is included. Your booking will be reserved ahead of time by Autel.

Please arrive any time after 3 PM on the day before the first day of training to check in.

 
Hilton Garden Inn Roslyn
Address: 3 Harbor Park Dr, Port Washington, NY 11050
Phone: (516) 626-3600

HOTEL ACCOMMODATIONS ARE INCLUDED
A breakfast voucher will be provided and can be redeemed at the hotel, lunch will be provided at the Autel training facility, and a dinner voucher will be provided and can be redeemed at the hotel.
HOTEL SHUTTLE
A shuttle from the hotel and to the Autel Academy, and back to the hotel, will be provided. Please meet each morning in the lobby of the hotel at 8:15 AM. If you prefer to walk, the Autel Academy is less than a half mile walk from the hotel.

Frequently Asked Questions:

Where can the Academy Cards and promotional codes be redeemed? Where do end users register?
At the Autel website:
https://autel.com/us/academy-training

Are hotel accommodations provided and included?
Yes. If end users elect for the hotel accommodations, a stay at the Hilton Garden Inn at Roslyn is included. Their booking will be reserved ahead of time by Autel.

Are meals included?
A breakfast voucher will be provided and can be redeemed at the hotel, lunch will be provided at the Autel training facility, and a dinner voucher will be provided and can be redeemed at the hotel.

Is travel to the Autel Academy training center in New York included?
No. Travel to New York will not be provided.

Location: