Using the application chart (shown below), identify vehicle as having a Type 1 or Type 2 ignition housing.

If Type 2, use the included pointed center punch to back out the ignition headless bolts if necessary.

Using the supplied awl/ice pick, insert the tip into the end of the roll pin and gently move it side to side in all directions. Use ice pick to center the roll pin within the hole.

Using 2 of the 3 color-coded thumb screws, attach the fixture to the front of the ignition housing. Use spacing washers if necessary.

Insert the Black Tee thumb screw into the 1/4-20 tapped hole and snug it up against the ignition cylinder.

Insert a short tube into the brass thumb screw and LIGHTLY snug in place using the set screw. Insert the long tube through the outer tube so that the flared tip is on the threaded end of the screw.

Insert the brass thumb screw assembly into the threaded hole seating the flared tip over the top of the roll pin. Verify the flared end is seated over the roll pin by trying to move the tip side to side.

Thread the brass thumb screw 1-2 full rotations, then lightly tap the back end of the tube inwards to ensure it’s fully seated over the roll pin.

Continue turning the brass thumb screw assembly until it comes to a definite stop. DO NOT OVER-TIGHTEN.

Tighten the set screw ONE FULL ROTATION ONLY.

Loosen the Black 1/4-20 Tee thumb screw.

Unthread the brass thumb screw assembly with roll pin now attached.

If Type 1, be sure to use the ice pick to lift the steering lock tail piece during cylinder removal.

Honda/Acura Ignition Roll-Pin Removal Kit Tips:

After using the ice pick and before installing the fixture, lightly tap on the cylinder itself (not the cylinder housing) with a hammer in the direction of the roll pin to ensure the roll pin is out as far as possible.

Since the roll pin is tapered on the ends, you can use the ice pick placed in the center of the roll pin and tap LIGHTLY to slightly flare out the roll pin to allow for greater “bite”. Be sure to follow tip #1 afterwards to “push” the roll pin out as far as possible.

Honda/Acura Ignition Roll-Pin Removal Kit Application Guide:

Make

Model

Years

Type

HONDA

Accord

1998-2002

2

2003-2012

1

Civic

2001-2011

1

Crosstour

2010-2012

1

CR-V & CR-Z

2002-2014

1

Element

2003-2011

1

Fit

2007-2014

1

Insight

2000-2006

2

2010-2014

1

Odyssey

1999-2004

2

2005-2013

1

Pilot

2003-2004

2

2005-2015

1

Prelude

1997-2001

2

Ridgeline

2006-2014

1

S2000

2000-2009

2

ACURA

CL

1997-2003

2

MDX

2001-2006

2

2007-2013

1

RDX

2007-2012

1

RSX

2002-2006

1

TL

1999-2003

2

2004-2013

1

TSX

2004-2014

1

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

Product Type: Pick & Decoder

OE Part #: IRPRF

This pack includes 10 clamp tube sets to be used with our Honda/Acura Ignition Roll Pin Removal Kit.

Compatible with the following:

1998 – 2012 Honda Accord

2001 – 2011 Honda Civic

2010 – 2012 Honda Crosstour

2002 – 2014 Honda CR-V

2011 – 2015 Honda CR-Z

2003 – 2011 Honda Element

2007 – 2014 Honda Fit

2000 – 2006 Honda Insight

2010 – 2014 Honda Insight

1999 – 2013 Honda Odyssey

2003 – 2015 Honda Pilot

1997 – 2001 Honda Prelude

2006 – 2014 Honda Ridgeline

2000 – 2009 Honda S2000.

1997 – 2003 Acura CL

2001 – 2013 Acura MDX

2007 – 2012 Acura RDX

2002 – 2006 Acura RSX

1999 – 2013 Acura TL

2004 – 2014 Acura TSX.

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

Number on Blade: 02

Keyway: TR47

Manufacturer: KEYDIY

In order to attach the blade to the remotes, you will need Roll Pins. They are sold separately at the link below.

1.6 x 8.0 mm Roll Pins (100 Pack)

– these pins will fit Xhorse and KEYDIY Universal Remotes

Compatible with:

1998-2008 Toyota Land cruiser

1998-2010 Toyota Avalon

1992-2014 Toyota Camry

1994-2005 Toyota Celica

1998-2011 Toyota Sienna

1996-2014 Toyota 4Runner

1999-2009 Toyota Solara

1993-1999 Toyota Supra

2001-2009 Toyota Highlander

2001-2013 Toyota Sequoia

1993-2014 Toyota Corolla

2005-2013 Toyota Matrix

2005-2015 Toyota Tacoma

1994-2013 Toyota RAV-4

2000-2009 Toyota Tundra

2007-2013 Toyota FJ Cruiser

2009-2013 Toyota Venza

2007-2014 Toyota Yaris

2005-2014 Scion tC

2008-2009 Scion xD

2008-2009 Scion xB

2013-2016 Scion FR-S

2007-2010 Pontiac Vibe

2013 Subaru BRZ

Manufacturer: AeroLock

Made from High-Quality Stainless Steel, the Aerolock Multi-Function Clip Removal Tool makes your job faster & easier:

Removes Kwikset spindles

Detent pusher for commercial & residential locks

Removes C and E clips on Kwikset, Schlage, and import locks

Cylinder removal tool

This Fixing Tool Flip Key Vice holds most remote key fobs safely and allows to remove and insert roll pins to change blades.

Use it to quickly disassemble/assemble the remote keys.
Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty. This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied. If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another Klom tool but we will not refund or replace the tool

Made by high-quality steel, comes in a hard plastic box, strong protection, it is a professional tool for locksmith.

With the pliers, it’s very easy to remove the pin and take off the blade for cutting.

Package included :

1 x Auto Remote Key Blade Pin Disassembling Clamp

2 x Removal pinheads

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty. This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied. If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another Klom tool but we will not refund or replace the tool

This is not your ordinary pair of auto cap pliers. The curved end of the jaw follows the curved outside surface of the face cap to minimize the likelihood of damaging or disfiguring the outside surface of the cap.

When the lock is ready to reassemble, the old cap can be reused using the recessed inside jaws. These pliers are designed to stake spring covers, such as those used on GM sidebar locks, BMW etc.

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty. This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied. If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another Klom tool but we will not refund or replace the tool

Manufacturer: Global
Tecspro

Holds your remote head keys in place for roll-pin removal and replacement. 2 jigs provided:

LT-070 for standard, traditional style of remote head key (groove in the blade)

LT-069 for those that turn the blade on its side (hole in the blade)

Plastic peg is provided and attaches inside the bottom of each jig for easy storage.

PN: 81926-1U000

Compatible with the following:

2017 – 2019 Kia Niro

2014 – 2019 Kia Optima

2012 – 2019 Kia Rio

2015 – 2019 Kia Sedona

2014 – 2019 Kia Soul

2014 – 2019 Kia Sportage