HDMI Extenders | Alliance Locksmith

Seco-Larm – SLM-MVE-AH1E1-01NQ – HDMI Extender over Single Cat5e/6 – 4K – Up to 164ft (50m)

Alliancelocksmith — Fri, 24 May 2024 04:04:51 +0000

SLM-MVE-AH1E1

ENFORCER HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6 cable. HDMI formats as large as 1080p can be transmitted up to 164ft (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also supports HDMI loop output, EDID management settings, and one way IR control for remotely controlling HDMI sources and displays.

Extend HDMI over a single Cat5e/6 cable

Supports resolutions from 480i to 1080p with zero signal loss

Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable

HDMI Loop output for local HDMI displays

Plug and play operation – comes as a complete set

IR Pass-through for remote control extension and operation

EDID Management switch

Two (2) 5VDC power supplies included

Specifications

Input Video Signal

3.3V

Input DDC Signal

5Vp-p (TTL)

Deep Color

24-Bit

Video Format Supported

High-speed HDMI, HDCP 1.2

Audio Formats Supported

LPCM, Dolby-AC3, DTS7.1, DSD

Output Video

HDMI®

Resolutions Supported

1080p/1080i/720p/576p/576i/480p/480i

Range – 4K

Up to 164′ (50m)

Video Amplifier Bandwidth

4.95Gbps

Maximum Input Cable Length

24AWG (15m), 26AWG (10m), 28AWG (5m)

Video Input Connector

HDMI Type A 19-pin female

IR Pass-through Frequency

30~60 kHz

Operating Voltage

5VDC

Power Supply

1A@5VDC (2 Adapters) (2.1mm plug)

ESD Protection (Human Body Model)

±8kV (Air-gap discharge), ±4kV (contact discharge)

Cat5e/6 Wiring Standard

T568-B

Current Draw

Transmitter- 300mA@5VDC Receiver- 200mA@5VDC

Operating Temperature

32°~104° F (0°~40° C)

Operating Humidity

20~90% RH (no condensation)

Dimensions

31/8″x11/16″x25/8″ (79x17x67 mm)

Weight

5.3-oz (150g) (Each)

Maximum Single Link Range

1080p

Specifications

Manual

Seco-Larm – SLM-MVE-AH1E1-42NQ – HDMI Extender over Single Cat5e/6 – 4K – Up to 197ft (60m)

Alliancelocksmith — Fri, 24 May 2024 04:04:50 +0000

ENFORCER 4K HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI formats as large as 4K
can be transmitted up to 197ft (60m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.

Extend HDMI over a single Cat5e/6 cable

Supports resolutions from 480i to 1080p with zero signal loss

Transmits 4K@60Hz up to 197′ (60m) or 1080p@60Hz up to 230′

Plug and play operation – comes as a complete set

Active operation ensures signal strength

IR for remote control extension

One (1) 12VDC power supply included – set can be powered at either end

Specifications

Maximum Single Link Range

4K@60Hz

Deep Color

8bit

Video Format Supported

High-speed HDMI, HDCP 2.2

Audio Formats Supported

LPCM 2/51/7.CH, Dolby Digital, DTS 5.1, Dolby Digital+, DolbyTrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X

Output Video

4K@60Hz

Resolutions Supported

4K@60Hz/4K@30Hz/1080p/1080i/720p/576p/576i/480p/480i

Range

1080p: Cat6: Up to 230′ (70m); Cat5e: Up to 164′ (50m)

Range – 4K

Cat6@60Hz: Up to 197′ (60m); Cat5e@60Hz: Up to 164′ (50m)

Video Amplifier Bandwidth

18Gbps

Video Input Connector

HDMI Type A 19-pin female

Video Output Connector

HDMI Type A 19-pin female

IR Frequency

30 ~ 60 kHz

Power Supply

1A@12VDC (1 Adapter) (2.1mm plug)

ESD Protection (Human Body Model)

±8kV (air-gap discharge), ±4kV (contact discharge)

Cat5e/6 Wiring Standard

T-568B

Operating Temperature

32°~104° F (0°~40° C)

Operating Humidity

20~90% RH (no condensation)

Dimensions

3-7/16″x23 / 8″x11/16″ (88x61x17 mm)

Weight

5.08-oz (144g) (each)

Specifications
Manual

DynoTech – 400071 – HDBT – HDMI Extender over Single Cat5e/6 – IR – 220ft

Alliancelocksmith — Thu, 23 May 2024 23:41:15 +0000

This
DynoTech HDBT HDMI Extender
extends high definition video and audio signals and IR at a distance up to 220 feet over a single Cat5e/6 cable. It features EDID management, which allows source and display “handshake” for seamless integration. With only one cost effective Cat5e/6 cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances.
Features

Supports Deep Color Video and Dolby TrueHD Audio

4K up to 120ft

1080p up to 220ft

Bi-Directional IR

PoC – Power Over Cable

Slim Design

DynoTech – 400031 – HD101 – HDMI Extender over Single Cat 5e/6 – IR – 200ft

Alliancelocksmith — Thu, 23 May 2024 23:39:57 +0000

This
DynoTech HD101 HDMI Extender
extends high definition video and audio signals, as well as IR at a distance up to 200 feet over a single Cat5e/6 cable. It features EDID management, which allows source and display “handshake” for seamless integration. With only one cost effective Cat5e/6 cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances.
Features

Supports Deep Color Video and Dolby TrueHD Audio