VOSKER – Security Box for Security Cameras for V100 and V200 Series Mobile Security Cameras. 

Weather Resistant Heavy Duty Steel, Protects Cams from People, Animals, Theft and Environmental Damage.

Features:

Holes in the back to anchor to any surface

Holes on both side to insert a cable-lock or a standard lock

Fits all Vosker security cameras

Universal Vosker Camera Support –
This heavy-duty security camera protection box can easily fit both V100 and V200 cameras to provide flexibility and support outdoors.
Rugged All-Weather Design –
Crafted from a premium-grade steel our security camera box is made for year-round use, so you can safeguard a home or property in even the most unstable weather.
Quick, Stable Mounting –
We’ve added holes on both sides to make it easier to insert our cable lock, as well as hole on the front to install a traditional padlock or key lock.
Mountable for Added Stability –
Inside the high-security lockbox on the back you’ll find holes that help you screw it into a flat surface, pole, or other access point to provide longer-lasting resilience.
Smart, Accessible Front Panel –
The best part of the Vosker lock box is that the front makes it easier to install or remove a camera to check stored pictures or videos.

Holes in the back to anchor to any surface

Holes on both sides to insert a cable-lock (V-CB-LOCK) or a standard lock

Hole in front to install a lock (a MINIMUM diameter of 3/8″ (9mm) for the shackle or rod of the lock is recommended)

Fits VOSKER V150 security cameras

Compatible with VOSKER 360 mounting arm (V-MT360)

Removable front part for easy usage

Heavy-Duty Steel security box

Universal Vosker Camera Support –
This heavy-duty security camera protection box fits the V150 cameras to provide flexibility and support outdoors.
Rugged All-Weather Design –
Crafted from a premium-grade steel our security camera box is made for year-round use, so you can safeguard a home or property in even the most unstable weather.
Quick, Stable Mounting –
We’ve added holes on both sides to make it easier to insert our cable lock, as well as hole on the front to install a traditional padlock or key lock. (see recommended size)
Mountable for Added Stability –

Inside the high security lock box on the back you’ll find holes that help you screw it into a flat surface, pole, or other access point to provide longer-lasting resilience.
Smart, Accessible Front Panel –
The best part of the Vosker lockbox is that the removable front section makes it easier to install or remove a camera to check stored pictures or videos and swap the battery. It’s also compatible with VOSKER 360 mounting arm V-MT360.

Includes Mounting Hardware

Includes Limited 1-Year Warranty

Dome Form

Mount Type: Wall Mounts, Ceiling Mounts

Material: Aluminum & SECC

Fits MNT-ARM, PTZ WALL ARMS, MNT-POLIP, MNT-PCNRIP

Includes (4) M6x25 screws, (4) M6x14 screws, (4) M8 Plastic anchors, (3) Water joint, (1) Wrench

Outdoor large junction box for the MNT-ARM, PTZ WALL ARMS, MNT-POLIP, MNT-PCNRIP.

Downloads:

Spec Sheet

User Manual

Aluminum alloy +ABS construction

For in-ceiling indoor installations

Fits 4” square, 4” octagon, single or double-gang junction boxes

IC Realtime knows time is money for installers, and that every client expects indoor camera installations to look clean, neat and professional. So in our 20-year tradition of bringing real-world support to busy camera integrators, we are proud to offer MNT-GB-PLATE-1, a new No-Drill non-weatherproof
security camera junction box
adapter plate for standard electrical gang boxes to fit our dome cameras, This pre-drilled mounting plate makes
camera junction box
installation easier & more time-efficient.

Sturdy cast aluminum alloy base plate

6.06” in diameter x 0.33” thick

No-Drill direct gang box mounting

Fits 4″ standard single or double gang square or an octagon electrical junction boxes

Large contoured cable access hole

Paintable white ABS top trim plate for a neat installation

Four concentric pre-drilled camera base hole patterns

Concentric hole patterns match the four IC Realtime dome camera bases

4 Camera Mount Screws & wrench included

The next time you’re ordering dome cameras for indoor gang box installation, ask your factory rep or distributor for a matching MNT-GB-PLATE-1 for each
dome camera mount
. Using an MNT-GB-PLATE-1 under each camera will speed installation and leave them with the clean, professional interior finish your clients expect.

Downloads:

Spec Sheet

User Manual

IP66 rated

Aluminum Construction

Fits AVS-PANO-A007 camera

Includes M4x10 screw x4 | ST4.2×25 screw x4 | Plastic Anchor x4 | S3.0 wrench x1

OUTDOOR WEATHER PROOF ROUND JUNCTION BOX FOR AVS-PANO-A007.

Downloads:

Spec Sheet

User Manual

Junction Box

Material: Aluminum & SECC

Round Junction Box For Mini Domes And Round Base Bullets

Downloads:

Spec Sheet

User Manual

Neat & Integrated design

Junction Box

Material: Aluminum

Outdoor weather proof round junction box for ICIP-D720IR-T12 and all DVIR dome cameras.

Downloads:

Spec Sheet

User Manual

Material: Aluminum

Fits small-sized dome cameras

Water-proof Junction Box

Downloads:

Spec Sheet

User Manual

Material: Aluminum

Internal safety cord

Fits medium sized dome cameras

MNT-JUNCTIONBOX-8-B is one of those useful camera accessories that does exactly what a camera pro needs – it makes camera installation start quicker, go smoothly & end in record time. MNT-JB8 fits multiple IC Realtime medium size black dome cameras and – like all our junction boxes that fit Factory Black cameras – MNT-JB8 has a camera-matched black finish so it appears as part of the camera base once installed. 
While some of our junction boxes are intended only for indoor use, MNT-JB8 is weatherproof when correctly installed, making it suitable for installation either indoors or outdoors. The wall contact bottom of the cast metal base is covered by a base gasket and has a rear center thru-wall conduit connection access for surface attachment, and two side-mounted ¾” threaded NPT ports with removable weather-tight caps for surface conduit installation. 
The MNT-JUNCTIONBOX-8-B camera contact top has camera base mounting holes that are pre-drilled to accommodate a wide variety of 3-hole-based IC Realtime medium-size dome cameras, and MNT-JB8’s Factory Black exterior is painted on the same production line as the Factory Black cameras to exactly match any attached Factory Black finish medium dome cameras. 
MNT-JUNCTIONBOX-8-B is 6.34”x1.46” (161mm x 37mm ) meaning although it is low profile, there is plenty of room inside for your weather-sealed camera pigtail connections. Shipped ready for installation, this junction box comes with mounting hardware and a camera base gasket in the box. 
So the next time your job calls for an IC Realtime medium-sized black dome or eyeball camera, be sure to add the MNT-JUNCTIONBOX-8-B for each to ensure a quick & easy installation.
 

Downloads:

Spec Sheet

User Manual