Model: MNK-MK240

Manufacturer: Lock Monkey Tools

Round handle made of hard plastic helps you get a good grip and get some real force behind your opening

Comes with a total of 5 shims, 1 attached to the handle and 4 extras in handy case

Great flexibility to get around corners. Great strength to move that latch inwards.

Also works on window catches

Perfect tool to help protect paint while opening car doors with long reach tools

2 different thicknesses: 3 thick & 3 thin

Black PVC case included with velcro closure

Description
Open virtually any susceptible knob or gate latch lock. In our experience, this works for around 25% of the residential door unlockings you will run into when a deadbolt is not locked. Use this as your FIRST option: either it will open the door in under 5-10 seconds or you move onto picking.

STEP 1: Pull the door towards you to make the dead latch fall into the strike hole.

STEP 2: Slide shim into door gap below the latch and then move the shim upwards until it comes in contact with the door latch.

STEP 3: Move the shim backward until it clears the latch, then move it up on top of the latch

STEP 4: Push the latch shim forward forcefully while at the same time pulling the door backward towards you. If the latch is susceptible, the door should open. If does not open, move on to your next opening method (eg. picking the lock).

TIP:
If you can get the dead latch to extend far enough out from the faceplate, you can open the door with a latch shim. Pulling the door towards you HARD to get the dead latch to fall into the strike hole is one way. Under the right conditions, another way could be to use an air wedge to create a large enough gap between the door and the door jamb. It may take some extra force to make that latch move with the shim, but many times you can get that door to POP! open this way

Manufacturer: Lock Monkey Tools

Description

Necessity
 when working with standard residential and commercial locks.

BRK-SHMCRV1 1888

Model: MNK-MK380

Manufacturer: Lock Monkey Tools

Made with 1/16″ thick steel to provide extremely high durability

Laser cut provides higher tolerances and more accuracy

Laser engraved markings will never rub off

Slim shape to easily fit in your existing tool kit

Dimensions: 2.25″W x 6.5″H

Replaces Schlage 40-140 Key Gage, pin depressor from M504-310

Description

12 useful tools for residential/commercial locksmithing:

Kwikset Key Gauge (KW1/KW10/KW11)

Schlage Key Gauge (SC1/SC4/SC7/SC8/SC9/SC10)

Yale Key Gauge (Y1
,Y2
)

Arrow Key Gauge (AR1
,AR4
)

Weiser Key Gauge (WR5)

Master Key Gauge (M1)

Weslock Key Gauge

SFIC A2 Key Gauge (Best/Arrow/Falcon Small Format IC Core)

Kwikset C-Clip Manipulation Tool (A)

Schlage F-Line C-Clip Removal Tool (B)

Retaining Pin Depressor (C)

Universal C-Clip/E-Clip Removal Tool (D)

Manufacturer: Lock Monkey Tools

Manufacturer: Lock Monkey Tools

Manufacturer: Lock Monkey Tools

Manufacturer: Lock Monkey Tools

Model: MNK-MK310

Manufacturer: Lock Monkey Tools

Replaces:

HPC SCRT-1

Lab LCR005

Model: MNK-MK300

Manufacturer: Lock Monkey

Instructions:

STEP 1: Drill your 2-1/8″ hole for the main lock body

STEP 2: Drill your 1″ hole for the latch/bolt

STEP 3: Insert the strike locator into your latch/bolt hole with the sharp end facing out

STEP 4: Close the door and use a hammer to tap the strike locator, leaving a mark in the door jamb

STEP 5: Use the new mark as your center point and drill your 1″ hole in the door jamb for your new strike

Made of solid stainless steel, works well for both wood and steel preps.
Replaces:

Kwikset KWI-89919-001 (#2846)

Major HIT-24

Pro-Lok INJIG-116