Fully mechanical lock eliminates the material and labor expense of battery replacements

Single access code—one easy-to-manage code for all users

Lock is easily programmed via keypad without removing lock from the door

Non-handed; required drive assembly is factory-handed, not field reversible

Operation Modes:

Pushbutton Access
,
Passage
—allows access without using the lock entry code. Feature activated from the outside using cylinder override key.
Lockout
—disables the lock so that entry code cannot be used to gain access. Access is permitted using the key override only. This is activated from the outside using the cylinder override key.

Specifications:

Construction:

All metal cast front housing, force-resistant, clutch-protected fixed thumbturn

Locking Device:

Adams Rite 4510/4710/4910 mortise latch

Numeric Keypad:

Vandal resistant, solid metal pushbuttons

Handing:

Non-handed; required drive assembly is factory-handed, not field reversible

Finish:

Duranodic Finish

Key Override: (not included)

Accepts Maximum Security (MS) mortise cylinders; can be used to override the lock combination and gain access using a key. Allows facilities to initiate or maintain a master-keyed security system (keyed alike or keyed differently).

Backset: (not included) must be chosen from driver assembly

Model 3010: Right Hand; Right Hand Reverse—31⁄32″ (25 mm)

Model 3020: Left Hand; Left Hand Reverse—31⁄32″ (25 mm)

Model 3030: Right Hand; Right Hand Reverse—1⅛” (29 mm) or 1½” (38 mm)

Model 3040: Left Hand; Left Hand Reverse—1⅛” (29 mm) or 1½” (38 mm)

Latch:

Purchased separately

Minimum Stile Recommended:

1⅞” (48 mm) minimum, required for mounting

Strike:

Sold separately

Door Thickness:

1¾” (44 mm) maximum

Durability:

Weather Resistant

Certification:

BAA/NAFTA certified

Warranty:

1 year manufacturer warranty

This Lock needs a drive assembly and an Adams Rite lock to work. It will
NOT
operate as a stand alone lock with out these other parts. We sell everything needed to operate but they must be purchased separately.
Find the Left and Right Handed drive assembly here
Downloads:

Installation Guide

Spec Sheet

Return Policy: We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact DORMA KABA directly at 1-800-849-8324 or visit their support page
here
. Once you have the ticket contact UHS Hardware for the return.

Fully mechanical lock eliminates the material and labor expense of battery replacements

Single access code—one easy-to-manage code for all users

Lock is easily programmed via keypad without removing lock from the door

Non-handed; required drive assembly is factory-handed, not field reversible

Operation Modes:

Pushbutton Access
,
Passage
—allows access without using the lock entry code. Feature activated from the outside using cylinder override key.
Lockout
—disables the lock so that entry code cannot be used to gain access. Access is permitted using the key override only. This is activated from the outside using the cylinder override key.

Specifications:

Construction:

All metal cast front housing, force-resistant, clutch-protected fixed thumbturn

Locking Device:

Adams Rite 4510/4710/4910 mortise latch

Numeric Keypad:

Vandal resistant, solid metal pushbuttons

Handing:

Non-handed; required drive assembly is factory-handed, not field reversible

Finish:

Satin Chrome 26D (626)

Key Override: (not included)

Accepts Maximum Security (MS) mortise cylinders; can be used to override the lock combination and gain access using a key. Allows facilities to initiate or maintain a master-keyed security system (keyed alike or keyed differently).

Backset: (not included) must be chosen from driver assembly

Model 3010: Right Hand; Right Hand Reverse—31⁄32″ (25 mm)

Model 3020: Left Hand; Left Hand Reverse—31⁄32″ (25 mm)

Model 3030: Right Hand; Right Hand Reverse—1⅛” (29 mm) or 1½” (38 mm)

Model 3040: Left Hand; Left Hand Reverse—1⅛” (29 mm) or 1½” (38 mm)

Latch:

Purchased separately

Minimum Stile Recommended:

1⅞” (48 mm) minimum, required for mounting

Strike:

Sold separately

Door Thickness:

1¾” (44 mm) maximum

Durability:

Weather Resistant

Certification:

BAA/NAFTA certified

Warranty:

1 year manufacturer warranty

This Lock needs a drive assembly and an Adams Rite lock to work. It will
NOT
operate as a stand alone lock with out these other parts. We sell everything needed to operate but they must be purchased separately.
Find the Left and Right Handed drive assembly here
Downloads:

Installation Guide

Spec Sheet

Return Policy: We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact DORMA KABA directly at 1-800-849-8324 or visit their support page
here
. Once you have the ticket contact UHS Hardware for the return.

Fully mechanical lock eliminates the material and labor expense of battery replacements

Single access code—one easy-to-manage code for all users

Lock is easily programmed via keypad without removing lock from the door

Factory-handed for
Left Hand Reverse
; not field reversible

Key Override: Small format interchangeable cores

Pushbutton Access

Passage—allows access without using the lock entry code. Feature activated from the inside with a thumbturn or key (included with all passage feature models).

Lockout—disables the lock from the inside so that the entry codes cannot be used to gain access. Access is permitted using key override.

Specifications:

Construction:

Cast front housing; unified trim plate; fixed ADA—compliant levers

Locking Device:

Mortise with ¾” (19 mm) two-piece anti-friction latch

Numeric Keypad:

Vandal resistant, solid metal pushbuttons

Handing:

Factory-handed for Left Hand Reverse; not field reversible

Finish:

Satin Chrome 26D (626)

Key Override:

SFIC, Best and Equivalents (6 or 7-pin length);
core not included

Backset:

2¾” (70mm) Backset

Latch:

¾” (19 mm) two-piece anti-friction latch

Minimum Stile Recommended:

5″ (127 mm)

Strike:

4⅞” (124 mm) L x 1¼” (32 mm) W x ¼” (6 mm) D Deadbolt/Latch mortise strike plate

Door Preparation:

Easily installs on wood or metal doors. Standard (86) mortise preparation

Door Thickness:

1¾” (44 mm) to 2¼” (57 mm)

Accessibility Standard:

Americans with Disabilities Act (ADA); fixed ADA-compliant levers

Durability:

Weather resistant

Fire Rating:

3-hour UL/ULC fire rating for “A” label doors

Warranty:

3 years manufacturer warranty

Downloads:

Installation Guide

Spec Sheet

Return Policy:
We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact DORMA KABA directly at 1-800-849-8324 or visit their support page
here
. Once you have the ticket contact UHS Hardware for the return.

Combination, Passage, Lockout, and Key Override Entry.

core not included
Features:

Fully mechanical lock eliminates the material and labor expense of battery replacements

Single access code—one easy-to-manage code for all users

Lock is easily programmed via keypad without removing lock from the door

Factory-handed for Right Hand Reverse; not field reversible

Key Override: Small Format Interchangeable Cores (SFIC)

Pushbutton Access

Passage—allows access without using the lock entry code. Feature activated from the inside with a thumbturn or key (included with all passage feature models).

Lockout—disables the lock from the inside so that the entry codes cannot be used to gain access. Access is permitted using key override.

Specifications:

Construction:

Cast front housing; unified trim plate; fixed ADA—compliant levers

Locking Device:

Mortise with ¾” (19 mm) two-piece anti-friction latch

Numeric Keypad:

Vandal resistant, solid metal pushbuttons

Handing:

Factory-handed for Right Hand Reverse: not field reversible

Finish:

Satin Chrome 26D (626)

Key Override:

SFIC, Best and Equivalents (6 or 7-pin length);

core not included

Backset:

2¾” (70 mm)

Latch:

¾” (19 mm) two-piece anti-friction latch

Minimum Stile Recommended:

5″ (127 mm)

Strike:

4⅞” (124 mm) L x 1¼” (32 mm) W x ¼” (6 mm) Latch mortise strike plate

Door Preparation:

Easily installs on wood or metal doors. Standard (86) mortise preparation

Door Thickness:

1¾” (44 mm) to 2¼” (57 mm)

Accessibility Standard:

Americans with Disabilities Act (ADA)

Certification:

BAA/NAFTA Certified

Fire Rating:

3-hour UL/ULC fire rating for “A” label doors

Warranty:

3 years manufacturer warranty

Downloads:

Installation Guide

Spec Sheet

Return Policy:

We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact DORMA KABA directly at 1-800-849-8324 or visit their support page

here
. Once you have the ticket contact UHS Hardware for the return.

Combination, Passage, Lockout, and Key Override Entry.

core not included
Features:

Fully mechanical lock eliminates the material and labor expense of battery replacements

Single access code—one easy-to-manage code for all users

Lock is easily programmed via keypad without removing lock from the door

Factory-handed for Right Hand; not field reversible

Key Override: Small Format Interchangeable Cores (SFIC)

Pushbutton Access

Passage—allows access without using the lock entry code. Feature activated from the inside with a thumbturn or key (included with all passage feature models).

Lockout—disables the lock from the inside so that the entry codes cannot be used to gain access. Access is permitted using key override.

Specifications:

Construction:

Cast front housing; unified trim plate; fixed ADA—compliant levers

Locking Device:

Mortise with ¾” (19 mm) two-piece anti-friction latch

Numeric Keypad:

Vandal resistant, solid metal pushbuttons

Handing:

Factory-handed for Right Hand; not field reversible

Finish:

Satin Chrome 26D (626)

Key Override:

SFIC, Best and Equivalents (6 or 7-pin length);

core not included

Backset:

2¾” (70 mm)

Latch:

¾” (19 mm) two-piece anti-friction latch

Minimum Stile Recommended:

5″ (127 mm)

Strike:

4⅞” (124 mm) L x 1¼” (32 mm) W x ¼” (6 mm) D Deadbolt/Latch mortise strike plate

Door Preparation:

Easily installs on wood or metal doors. Standard (86) mortise preparation

Door Thickness:

1¾” (44 mm) to 2¼” (57 mm)

Accessibility Standard:

Americans with Disabilities Act (ADA)

Certification:

BAA/NAFTA Certified

Fire Rating:

3-hour UL/ULC fire rating for “A” label doors

Warranty:

3 years manufacturer warranty

Downloads:

Installation Guide

Spec Sheet

Return Policy:

We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact DORMA KABA directly at 1-800-849-8324 or visit their support page

here
. Once you have the ticket contact UHS Hardware for the return.

core not included
Features:

Fully mechanical lock eliminates the material and labor expense of battery replacements

Single access code—one easy-to-manage code for all users

Lock is easily programmed via keypad without removing lock from the door

Factory-handed for Left Hand; not field reversible

Key Override: Small Format Interchangeable Cores (SFIC)

Pushbutton Access

Passage—allows access without using the lock entry code. Feature activated from the inside with a thumbturn or key (included with all passage feature models).

Lockout—disables the lock from the inside so that the entry codes cannot be used to gain access. Access is permitted using key override.

Specifications:

Construction:

Cast front housing; unified trim plate; fixed ADA—compliant levers

Locking Device:

Mortise with ¾” (19 mm) two-piece anti-friction latch

Numeric Keypad:

Vandal resistant, solid metal pushbuttons

Handing:

Left Hand, Factory-handed; not field reversible

Finish:

Satin Chrome 26D (626)

Key Override:

SFIC, Best and Equivalents (6 or 7-pin length);
core not included

Backset:

2¾” (70 mm)

Latch:

¾” (19 mm) two-piece anti-friction latch

Minimum Stile Recommended:

5″ (127 mm)

Strike:

4⅞” (124 mm) L x 1¼” (32 mm) W x ¼” (6 mm) D Deadbolt/Latch mortise strike plate

Door Preparation:

Easily installs on wood or metal doors. Standard (86) mortise preparation

Door Thickness:

1¾” (44 mm) to 2¼” (57 mm)

Accessibility Standard:

Americans with Disabilities Act (ADA)

Certification:

BAA/NAFTA Certified

Fire Rating:

3-hour UL/ULC fire rating for “A” label doors

Warranty:

3 years manufacturer warranty

Downloads:

Installation Guide

Spec Sheet

Return Policy:
We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact DORMA KABA directly at 1-800-849-8324 or visit their support page
here
. Once you have the ticket contact UHS Hardware for the return.

Combination, Passage, Lockout, Deadbolt, and Key Override Entry.

core not included
Features:

Fully mechanical lock eliminates the material and labor expense of battery replacements

Single access code—one easy-to-manage code for all users

Lock is easily programmed via keypad without removing lock from the door

Factory-handed for Right Hand; not field reversible

Key Override: Small Format Interchangeable Cores (SFIC)

Pushbutton Access

Passage—allows access without using the lock entry code. Feature activated from the inside with a thumbturn or key (included with all passage feature models).

Lockout—disables the lock from the inside so that the entry codes cannot be used to gain access. Access is permitted using key override.

Specifications:

Construction:

Cast front housing; unified trim plate; fixed ADA—compliant levers

Locking Device:

Mortise with 1″ (25 mm) deadbolt, ¾” (19 mm) two-piece anti-friction latch

Numeric Keypad:

Vandal resistant, solid metal pushbuttons

Handing:

Factory-handed for Right Hand; not field reversible

Finish:

Satin Chrome 26D (626)

Key Override:

SFIC, Best and Equivalents (6 or 7-pin length);

core not included

Backset:

2¾” (70 mm)

Latch:

¾” (19 mm) two-piece anti-friction latch

Minimum Stile Recommended:

5″ (127 mm)

Strike:

4⅞” (124 mm) L x 1¼” (32 mm) W x ¼” (6 mm) D Deadbolt/Latch mortise strike plate

Door Preparation:

Easily installs on wood or metal doors. Standard (86) mortise preparation

Door Thickness:

1¾” (44 mm) to 2¼” (57 mm)

Accessibility Standard:

Americans with Disabilities Act (ADA)

Certification:

BAA/NAFTA Certified

Fire Rating:

3-hour UL/ULC fire rating for “A” label doors

Warranty:

3 years manufacturer warranty

Downloads:

Installation Guide

Spec Sheet

Return Policy:

We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact DORMA KABA directly at 1-800-849-8324 or visit their support page

here
. Once you have the ticket contact UHS Hardware for the return.

Features:

Includes: Cobra Series (32″, 42″ & 52″ Rods) + Super Wedge Set + Bag

Everything kept together for ease of use & organization

Portable carrying case allows every tool to be used in every incident

Allows for quick access of all tools for all applications

With multiple tools, multiple workers can open different doors at the same time.

When used properly the Claw Wedge should only act as a preliminary PRY WEDGE inserted at a MAXIMUM of only 1/2 its length into the door jam (see picture & video), then removed after the other wedges are inserted.

Light and stable group lockout box made of sheet steel

Lid with innovative locking mechanism and fold-away handle

Comes with patented steel bracket for wall mounting

THE SOPHISTICATED SOLUTION FOR GROUP LOCKOUT
B835 SAFETY REDBOX is more than just a group lockout box.
It can be used as a mobile unit or hanging on the wall. This creates a fixed reference point at each facility, which provides greater transparency and security. The necessary machine locks are already stored in the box and thus within easy reach. With the help of the quick-release fastener inside, the box is fastened or released on the wall bracket, so that it’s ready for the next maintenance case. And of course it can be used as a mobile unit.
Technology:

High level of stability in spite of low weight

Ergonomic and space-saving fold-away handle

Inside is exposed to light from all sides for better visibility of contents

Lid features innovative and secure locking mechanism

Patented wall bracket, also facilitates storing of padlocks

Operation and use:
Lockout of large machinery or plants with many different access points and maintenance being carried out by a big number of people

Depth:

3 45/64 inch

Finish:

rot

Length:

9 29/64 inch

Locking Points:

12

Shackle Diameter:

9/32 inch

Wall Bracket:

6 27/32 x 1 37/64 x 25/32

Weight [lbs]:

14.52 lbs

Width:

6 27/32 inch

Lockout device made of robust and dielectric polypropylene

Available in two different sizes to match most common valve handles

Numerous locking holes allow for optimal positioning on the handle

During maintenance work, certain valves on machinery have to be locked in order to protect employees. This ball valve lockout device is used to block access to levers on standard ball valves. It stands out not only due to its low weight, it convinces mainly by the exact fit around the valve. The four arms of the lockout device make for an optimal reinforcement and easily grip even large levers. Padlocks can be exactly positioned due to the many holes on the device.
Technology:

High-quality polypropylene; long-lasting, robust and non-conductive

Two sizes: Handles for ball valves from 1/2″ to 8″

Well-positioned padlock holes for better grip on the valve

Operation and use:
To block most common ball valves
Variants:

V442: Small

V448: Big

Depth:

4 31/64 inch

Finish:

Red

Length:

12 1/64 inch

Locking Points:

1

Max. Handle Thickness:

25/64 inch

Max. Handle Width:

29/32 inch

Shackle Diameter:

9/32 inch

Weight [lbs]:

1.28 lbs

Width:

4 3/32 inch

Downloads:
Spec Sheet