but it will also work for many other programming machines that use a similar process
AutoProPAD
and
AutoProPAD LITE
etc..
This cable has been designed to interface almost all automotive transponder programmers that have the capability of programming 2018+ Chrysler vehicles. It functions by intercepting your programmer’s CAN high and low signals and passing them through the attached probes. Depending on your plan of attack, you can tap the CAN wires directly in the STAR module, in the vehicle instrument cluster or at the wires which transport the information between the STAR module and the immobilizer. The OBD throughput will feed 12V back to your programmer to keep it charged if that feature is supported by your machine.
How to use:

Plug the main cable of your programmer of choice into the female OBD port of the adapter.

Locate the star module on the vehicle. Location varies from model to model.

Locate the plastic green strip with white cables plugged into it. Probe your red (CAN HI) into the green cable of the first plugin, and the black (CAN LO) into the yellow wire.

Use your programmer of choice to select by vehicle or system type and program like normal.

Includes 2 Cables

JCD-1

JCD-2

Toyota/Lexus smart key programming via OBD for all key lost; Supports “94/4D, 98/39(128 bit), 88/A8, A9” smart key offline programming via OBD

Chip generation;
Generate emergency key to start the car when the dedicated chip is not available

Chip copy;
Copy chip via collect and decode chip data (Cover wide range of vehicle models, faster)

Chip simulation and conversion
; Generate various kinds of chip in urgent situation

Chip decode
; Support code calculation for most 46 smart key and blade key (include 4D)

Detect Ignition Coil Fault and Chip Type
: Identify the working statue of the ignition coil and the type of key chip (Supports all key lost)

This program works with K518 to program Hyundai/Kia, BYD, Porsche, Cayman, and Boxster without PIN code

It also works with K518 to program Mitsubishi (46/47) all key lost via OBD

Dismantle-free

Doesn’t require networking

Localized computing

Specifications:

Type:

Emulator

Dimensions:

68mm X 37mm X 11mm

Battery:

CR2032

Standby Current:

3.5ua

Working Current:

≤4ma

– All Keys Lost
for use with the
Lonsdor K518 USA

*PLEASE NOTE: This is only the update service, The machine is sold separately*

Support AKL Programming Even Under Alarm State

Support FK72 Version

Support Emergency Start

Support Smart Entry / Start

This function requires the use of Lonsdor key and open JLR license

2015 – 2015 Jaguar F-Type

2015 – 2017 Jaguar XJ

2015 – 2021 Jaguar XF

2017 – 2021 Jaguar F-Pace

2017 – 2021 Jaguar XE

2015 – 2021 Land Rover LR4

2015 – 2021 Land Rover Range Rover

2015 – 2021 Land Rover Range Rover Evoque

2015 – 2021 Land Rover Range Rover Sport

2015 – 2021 Land Rover Discovery

2015 – 2021 Land Rover Discovery Sport

See Video Below
“2015-2018 Jaguar Land Rover Range Rover Key Programming via OBD w/ K518USA”

IC: 1551A-14FBN

Frequency: 433 MHZ or 315 MHZ (Adjustable)

Battery:
CR2032

Buttons: Lock, Unlock, Panic

Aftermarket Emergency Key Included:
EKB-TOY-004

Test Key:
LXP90

Requires Toyota – H0440C Smart Key Authorization

Requires the Lonsdor K518USA Key Programmer or the Lonsdor KH100 PLUS

Compatible with the following:

2019 – 2021 Toyota Avalon

2019 – 2021 Toyota Highlander

2019 – 2021 Toyota RAV4 (US Production)

Note
: these can only be programmed using Lonsdor tools with the Toyota – H0440C Smart Key Authorization. There is no Incode Outcode from NASTF when programming with the Lonsdor. The Frequency on these keys are adjustable through the Lonsdor machine when programming a vehicle

See Video Below
“Programming Prox Keys for 2020 Toyota RAV4”
How to program Prox Keys – 2020 Toyota Rav 4 – AKL

IC: 1551A-14FBN

Frequency: 433 MHz or 315 MHz (Adjustable)

Battery:
CR2032

Buttons: Lock, Unlock, Panic, Trunk

Aftermarket Emergency Key Included:
EKB-TOY-004

Test Key:
LXP90

Requires Toyota – H0440C Smart Key Authorization

Requires the Lonsdor K518USA Key Programmer or the Lonsdor KH100 PLUS

Compatible with the following:

2019 – 2021 Toyota Avalon

Note
: these can only be programmed using Lonsdor tools with the Toyota – H0440C Smart Key Authorization. There is no Incode Outcode from NASTF when programming with the Lonsdor. The Frequency on these keys are adjustable through the Lonsdor machine when programming a vehicle

See Video Below

“Programming Prox Keys for 2020 Toyota RAV4”

How to program Prox Keys – 2020 Toyota Rav 4 – AKL

IC: 1551A-14FBC

Frequency: 433 MHZ or 315 MHZ (Adjustable)

Battery:
CR2032

Button: Lock, Unlock, Panic

Aftermarket Emergency Key Included:
EKB-TOY-004

Test Key:
LXP90

Requires Toyota – H0440C Smart Key Authorization

Requires the Lonsdor K518USA Key Programmer or the Lonsdor KH100 PLUS

Compatible with the following:

2019 – 2021 Toyota RAV4 (US Production)

2019 – 2021 Toyota Highlander

Note
: these can only be programmed using Lonsdor tools with the Toyota – H0440C Smart Key Authorization. There is no Incode Outcode from NASTF when programming with the Lonsdor. The Frequency on these keys are adjustable through the Lonsdor machine when programming a vehicle
See Video Below
“Programming Prox Keys for 2020 Toyota RAV4”
How to program Prox Keys – 2020 Toyota Rav 4 – AKL

Latest Improvements:

Exclusive support for 8A (H chip) generation

902 MHz Frequency Detection

Integrated Chip Holder

Data Collection from a greater distance

More accurate Frequency Detection

Faster Calculations and more memory

Lonsdor KH100+ Functions:

Once registration/activation has been completed, the programmer will enter the menu interface below:
Identify Copy
Enter this submenu and follow the system prompts to identify the remote.
Access Card Cloning
Using this submenu you’ll be able to identify and copy IC cards as well as garage keys.
Simulate Chip
Point the device’s antenna towards the ignition switch as shown choose the corresponding chip type to simulate. The device supports the following chip types: 4D / 46 / 47 / 48
Generate Chip
Place the desired chip into the induction slot (as shown), then choose the corresponding chip you wish to operate according to the prompts.
Note: some chip data will be covered and locked

Generate Remote
Within the Generate Key menu select ->[Generate remote], then choose the corresponding vehicle type to generate remote control (as shown) according to different regions.
Generate Smart Key
Within the Generate Key menu select ->[Generate smart key], then choose the corresponding vehicle type to generate smart key/card (as shown) according to different regions.
Identify Coil

Search smart induction area Connect remote key with remote connector, Put KH100+’s antenna close to the pre-determined position. If an inductive signal is identified, the device will continuously make sounds, please check if the position is right (as shown below).

Detect IMMO Connect remote key with remote connector, put KH100+’s antenna close to key identification coil, and use the key to turn ignition ON. When the KH100+ buzzer beeps, it means the signal is detected.

Remote Frequency
Enter this menu and then point the remote towards the device’s induction area to detect remote frequency.
Special Function
Include: detect infrared signal, unlock Toyota smart key, FT Toyota smart key, Charge key, More functions, to be continued…

Detect infrared signal
Put remote control at the infrared signal detection area, press the remote’s button once. When the light on KH100+’s screen is on, it indicates there is an infrared signal, otherwise there is no signal (see below pic).

FT smart key
For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key-value, unlock and upgrade program and etc. Put in the smart key, click [select] to operate.

Unlock Toyota smart key/detect Toyota key status
Put in the smart key, click OK to operate.

Charge key
For a chargeable key with a battery, you can perform this function. Put in the key, click [OK] to operate.

The chip types can be copied by Lonsdor KH100P remote maker
11 / 12 / 13 / 33 / 42 / 46 / 48 / 4C / 60 / 61 / 62 / 63 / 64 / 65 / 66 / 67 / 68 / 69 / 6A / 6B / 70E / 71 / 72G / 8A (Toyota H Chip)
Note 1:
11/12/13: Can be copied to T5/original JMD red super chip / original JMD king chip
33: Can be copied to T5/ blank 7935
42: Can be copied to blank 7935
46: Can be copied to LKP46/ CN3/ original JMD red super chip/ original JMD king chip
48: Can be copied to Deputy factory 48
4C/60/61/62/63/64/65/66/67/68/69/6A/6B/70E/71/72G: Can be copied to LKP4D/ JMD Red Super Chip (S-JMD) for Handy Baby/original JMD king chip for handy baby
8A (Toyota H) chip: Can be copied to TS21
Note 2:
The copy function is encrypted by the chip itself, some original car keys only support reading or editing, not copy.
If the original car key does not support copies, the copy button will not appear in the details page.

How to update Lonsdor HK100:
1- Enter settings menu
2- Connect the device to network
3- Then choose [check for updates]
4- One-click for online update!

See video below
How to program Prox Keys – 2020 Toyota Rav 4 – AKL

How to Force Update Lonsdor Units

Requires disassembling CEM module.
An example of the type of keys it works with
HERE

and
HERE
*PLEASE NOTE: This is only the update service, The machine is sold separately*
Works with the following models

2020-2021 XC40

2018-2021 XC60

2015-2021 XC90

2020-2021 S60

2017-2021 S90

2018-2021 V60

2016-2021 V90

Detailed Instructions available HERE