Magic Motorsport | Alliance Locksmith

Magic – FLK10 – Universal MAGBench Tool + Hardware FULL Kit

Alliancelocksmith — Thu, 23 May 2024 23:40:31 +0000

MAGBench
is the universal BDM frame or Jig tool produced by Magicmotorsport. It allows you to make stable connections with engine control units and automatic transmission units in Boot, JTAG and BDM modes.

This MAGBench FULL Kit Includes the Following:

FLK08:
allows connection with any ECU thanks to its slotted top panel and pogo pin probes.

FLK04:
Adapter kit for BDM programming.

FLX4.10:
Articulating Arm for FLEXible Bench.

FLX4.10G:
This adapter allows programming of vehicles from the Toyota group (including Denso 175822-xxx).

More Information Below:

This
Universal MAGBench
tool allows connection with any ECU thanks to its slotted top panel and pogo pin probes. With this tool,
it is possible to perform precise interventions on control units thanks to its wide hinged panel with 56 slots that allow connections to larger truck and heavy-duty vehicle control units. Universal MAGBench V3 can be customized with an assortment of accessories that facilitate your work and let you work efficiently on all types of control units. It is possible to purchase all its related accessories, adapters, and additional pogo pin probes directly on our online shop.

Extra features include an underlit panel and eight color-coded pogo pin probes. The Universal MAGBench V3 is an essential tool for your workshop.

MAGBench: stable and precise connections

Connect ECUs and TCUs in a stable and accurate way in Boot, BDM and Jtag modes. MAGBench is the Magicmotorsport jig tool designed to make safe connections to the electronic units of vehicles.

Thanks to its patented upper panel and 56 positioning holes, you can also connect to the control units of heavy duty vehicles. An indispensable tool for your mechatronics workshop.

The base in which to place the electronic unit is LED lit, so you can work with greater precision and safety.

The top panel is equipped with an analog lifting mechanism. The eight probes are colored and coded like the reference cables to make it easier to connect to the ECUs in Bootloader mode.

Included in the Hardware Kit:

FLK08

Universal MAGBench V3

FLK04

Universal MAGBench BDM adapter kit

FLX4.10

Universal MAGBench Articulating Arm for Adapters

FLX4.10G

Universal MAGBench: JTAG TOYOTA Renesas/NEC Adapter

Magic – FLS0.2S – SW Flex TCU OBD – Bench Slave

Alliancelocksmith — Thu, 23 May 2024 23:37:34 +0000

SW Flex TCU OBD + Bench SLAVE
With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.
Made specifically for the
FLEX FLK02

Note
: This is the
Slave Version
of this software module for the
Master Version
…Click
HERE

For a detailed definition of the Master and Slaves software versions see below
More Information Below:
What is the difference between a MASTER and SLAVE tool?
MASTER
The FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master has
the possibility to use the file modification services offered by MAGICMOTORSPORT and have access to 300 free Green coins per month as well as benefit from full MMS Tech Support.
SLAVE
The FLEX SLAVE tool can only work with encrypted files and therefore the user does not have the ability to access the content and cannot edit them. Any types of modification required by the Slave user must be forwarded to their Master who can encrypt and decrypt their files.
The Slave tool must be linked to a Master one. This Master can either be chosen by the Slave user or be recommended by MAGICMOTORSPORT based on the general geographical area of the Slave user.
Once the Master has been chosen, the Slave user will be exclusively linked to that Master for any operation that requires the modification of files. The Slave user benefits from basic MMS Tech Support and all support requests must first be handled by their Master.
Helpdesk runs on a coin payment system. There are two types of coins: GREEN and RED.
RED coins
are prepaid funds that have a monetary value of 1€ per coin. These can be bought through your Helpdesk account. RED coins can be converted to GREEN coins if necessary.
GREEN coins
are a special type of coin that are given to users that possess an FLEX or X17 MASTER tool. MAGICMOTORSPORT grants these MASTER users 300 GREEN coins a month that can be used for specified services. These GREEN coins cannot be converted into RED coins or be accumulated over time and their amount will automatically be reset to 300 at the beginning of each month.
IMPRORTANT NOTE: This is a Slave version of the software. It requires a Master version of the software to work properly. It does not includes any helpdesk support coins . Helpdesk desk support coins must be purchased separately through the device

Downloads:
Frequently Asked Questions

Magic – FLS0.3M – SW Flex Motorola MPC5xx Master

Alliancelocksmith — Thu, 23 May 2024 23:37:34 +0000

SW Flex Motorola MPC5xx Master
Motorola MPC5xx MASTER SW Package for FLEX
The FLS0.3M software package allows the MASTER user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW package be used with FLEX and the complete FLEXible Bench kit (or FLEXible Bench upgrade kit for MAGK00030.V2) to obtain more efficient results and safer working conditions with no connection errors.
Made specifically for the
FLEX FLK02

Note
: This is the
Master Version
of this software module for the
Slave version
…Click
HERE

The Master Version includes 300 Green Coins per month to be used for Helpdesk Support
For a detailed definition of the Master and Slaves software versions see below
More Information Below:
What is the difference between a MASTER and SLAVE tool?
MASTER
The FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master has the possibility to use the file modification services offered by MAGICMOTORSPORT and have access to
300 free Green coins per month as well as benefit from full MMS Tech Support.
SLAVE
The FLEX SLAVE tool can only work with encrypted files and therefore the user does not have the ability to access the content and cannot edit them. Any types of modification required by the Slave user must be forwarded to their Master who can encrypt and decrypt their files.
The Slave tool must be linked to a Master one. This Master can either be chosen by the Slave user or be recommended by MAGICMOTORSPORT based on the general geographical area of the Slave user.
Once the Master has been chosen, the Slave user will be exclusively linked to that Master for any operation that requires the modification of files. The Slave user benefits from basic MMS Tech Support and
all support requests must first be handled by their Master.

Helpdesk runs on a coin payment system. There are two types of coins: GREEN and RED.
RED coins
are prepaid funds that have a monetary value of 1€ per coin. These can be bought through your Helpdesk account. RED coins can be converted to GREEN coins if necessary.
GREEN coins
are a special type of coin that are given to users that possess an FLEX or X17 MASTER tool. MAGICMOTORSPORT grants these MASTER users 300 GREEN coins a month that can be used for specified services. These GREEN coins cannot be converted into RED coins or be accumulated over time and their amount will automatically be reset to 300 at the beginning of each month.
The Master Version includes 300 Green Coins per month to be used for Helpdesk Support

Downloads:
Frequently Asked Questions

Magic – FLS0.3S – SW Flex Motorola MPC5xx – Slave

Alliancelocksmith — Thu, 23 May 2024 23:37:33 +0000

SW Flex Motorola MPC5xx Slave
Motorola MPC5xx SLAVE SW Package for FLEX
The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW package be used with FLEX and the complete FLEXible Bench kit (or FLEXible Bench upgrade kit for MAGK00030.V2) to obtain more efficient results and safer working conditions with no connection errors.
Made specifically for the
FLEX FLK02

Note
: This is the
Slave Version
of this software module for the
Master Version
…
Click
HERE
For a detailed definition of the Master and Slaves software versions see below
More Information Below:
What is the difference between a MASTER and SLAVE tool?
MASTER
The FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master has
the possibility to use the file modification services offered by MAGICMOTORSPORT and have access to 300 free Green coins per month as well as benefit from full MMS Tech Support.
SLAVE
The FLEX SLAVE tool can only work with encrypted files and therefore the user does not have the ability to access the content and cannot edit them. Any types of modification required by the Slave user must be forwarded to their Master who can encrypt and decrypt their files.
The Slave tool must be linked to a Master one. This Master can either be chosen by the Slave user or be recommended by MAGICMOTORSPORT based on the general geographical area of the Slave user.
Once the Master has been chosen, the Slave user will be exclusively linked to that Master for any operation that requires the modification of files. The Slave user benefits from basic MMS Tech Support and all support requests must first be handled by their Master.
Helpdesk runs on a coin payment system. There are two types of coins: GREEN and RED.
RED coins
are prepaid funds that have a monetary value of 1€ per coin. These can be bought through your Helpdesk account. RED coins can be converted to GREEN coins if necessary.
GREEN coins
are a special type of coin that are given to users that possess an FLEX or X17 MASTER tool. MAGICMOTORSPORT grants these MASTER users 300 GREEN coins a month that can be used for specified services. These GREEN coins cannot be converted into RED coins or be accumulated over time and their amount will automatically be reset to 300 at the beginning of each month.
IMPRORTANT NOTE: This is a Slave version of the software. It requires a Master version of the software to work properly. It does not includes any helpdesk support coins . Helpdesk desk support coins must be purchased separately through the device

Downloads:
Frequently Asked Questions

Magic – FLS0.4M – SW Flex Nexus MPC5xxx Master

Alliancelocksmith — Thu, 23 May 2024 23:37:33 +0000

SW Flex Nexus MPC5xxx Master
With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.
Made specifically for the
FLEX FLK02

Note
: This is the
Master Version
of this software module for the
Slave version
…Click
HERE

Downloads:
Frequently Asked Questions

Magic – FLS0.4S – SW Flex Nexus MPC5xxx – Slave

Alliancelocksmith — Thu, 23 May 2024 23:37:10 +0000

SW Flex Nexus MPC5xxx Slave
With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.
Made specifically for the
FLEX FLK02

Note
: This is the
Slave Version
of this software module for the
Master Version
…Click
HERE

For a detailed definition of the Master and Slaves software versions see below
More Information Below:

What is the difference between a MASTER and SLAVE tool?
MASTER
The FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master has
the possibility to use the file modification services offered by MAGICMOTORSPORT and have access to 300 free Green coins per month as well as benefit from full MMS Tech Support.
SLAVE
The FLEX SLAVE tool can only work with encrypted files and therefore the user does not have the ability to access the content and cannot edit them. Any types of modification required by the Slave user must be forwarded to their Master who can encrypt and decrypt their files.
The Slave tool must be linked to a Master one. This Master can either be chosen by the Slave user or be recommended by MAGICMOTORSPORT based on the general geographical area of the Slave user.
Once the Master has been chosen, the Slave user will be exclusively linked to that Master for any operation that requires the modification of files. The Slave user benefits from basic MMS Tech Support and all support requests must first be handled by their Master.
Helpdesk runs on a coin payment system. There are two types of coins: GREEN and RED.
RED coins
are prepaid funds that have a monetary value of 1€ per coin. These can be bought through your Helpdesk account. RED coins can be converted to GREEN coins if necessary.
GREEN coins
are a special type of coin that are given to users that possess an FLEX or X17 MASTER tool. MAGICMOTORSPORT grants these MASTER users 300 GREEN coins a month that can be used for specified services. These GREEN coins cannot be converted into RED coins or be accumulated over time and their amount will automatically be reset to 300 at the beginning of each month.
IMPRORTANT NOTE: This is a Slave version of the software. It requires a Master version of the software to work properly. It does not includes any helpdesk support coins . Helpdesk desk support coins must be purchased separately through the device

Downloads:
Frequently Asked Questions

Magic – FLS0.5M – Full Flex software package – Master

Alliancelocksmith — Thu, 23 May 2024 23:37:09 +0000

Full package of software functions for FLEX in Master version
FLEX currently supports more than 22,000 vehicles. The full package of software functions for FLEX in the Master version includes: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx & Infineon TC17xxntent.
Made specifically for the
FLEX FLK02

Note
: This is the
Master Version
of this software module for the
Slave version
…Click
HERE

The Master Version includes 300 Green Coins per month to be used for Helpdesk Support
For a detailed definition of the Master and Slaves software versions see below
More Information Below:

Downloads:
Frequently Asked Questions

Magic – FLS0.5S – Full Flex software package – Slave

Alliancelocksmith — Thu, 23 May 2024 23:37:09 +0000

Full package of software functions for FLEX in Slave version
FLEX currently supports more than 22,000 vehicles. The Full package of software functions for FLEX in Slave version includes: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx & Infineon TC17xx
Made specifically for the
FLEX FLK02

Note
: This is the
Slave Version
of this software module for the
Master Version
…
Click
HERE
For a detailed definition of the Master and Slaves software versions see below
More Information Below:

Downloads:
Frequently Asked Questions

Magic – FLS0.6M – SW Flex Renesas SH7xxxx – Master

Alliancelocksmith — Thu, 23 May 2024 23:37:09 +0000

SW Flex Renesas SH7xxxx Master
The FLS0.6M software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of FLEX, it is also possible to perform a complete read and write directly via OBD on this family of microprocessors. MAGICMOTORSPORT recommends that this SW package be used with FLEX and the KUBOTA OBD socket to FLEX connection cable to obtain more efficient results and safer working conditions with no connection errors.
Made specifically for the
FLEX FLK02
Note
: This is the
Master Version
of this software module for the
Slave version
…
Click
HERE
The Master Version includes 300 Green Coins per month to be used for Helpdesk Support
For a detailed definition of the Master and Slaves software versions see below
More Information Below:
What is the difference between a MASTER and SLAVE tool?
MASTER
The FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master has the possibility to use the file modification services offered by MAGICMOTORSPORT and have access to
300 free Green coins per month as well as benefit from full MMS Tech Support.
SLAVE
The FLEX SLAVE tool can only work with encrypted files and therefore the user does not have the ability to access the content and cannot edit them. Any types of modification required by the Slave user must be forwarded to their Master who can encrypt and decrypt their files.
The Slave tool must be linked to a Master one. This Master can either be chosen by the Slave user or be recommended by MAGICMOTORSPORT based on the general geographical area of the Slave user.
Once the Master has been chosen, the Slave user will be exclusively linked to that Master for any operation that requires the modification of files. The Slave user benefits from basic MMS Tech Support and
all support requests must first be handled by their Master.

Downloads:
Frequently Asked Questions

Magic – FLS0.6S – SW Flex Renesas SH7xxxx – Slave

Alliancelocksmith — Thu, 23 May 2024 23:37:08 +0000

SW Flex Renesas SH7xxxx Slave
The FLS0.6S software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of FLEX, it is also possible to perform a complete read and write directly via OBD on this family of microprocessors. MAGICMOTORSPORT recommends that this SW package be used with FLEX and the KUBOTA OBD socket to FLEX connection cable to obtain more efficient results and safer working conditions with no connection errors.
Made specifically for the
FLEX FLK02
Note
: This is the
Slave Version
of this software module for the
Master Version
…
Click
HERE
For a detailed definition of the Master and Slaves software versions see below
More Information Below:

Downloads:
Frequently Asked Questions