Compact size, designed to mount on door frames

Easy to use on-board programming buttons. No dip switches

(4) Factory default operating modes, with the ability to customize mode attributes

Selectable fail safe/fail secure

(2) Form ‘C’ contacts

Momentary and latching relay modes

Secondary activation device input

Card/keypad input

Door position switch input

Request to Exit input

Built-in sounder (adjustable)

Tamper switch

Specification:

Voltage:

12/24 VDC Operation

Current Draw:

50 mA (Max)

Relays:

(2) Form ‘C’ (DPDT)

Contact Rating:

3 A @ 30 VDC

Programming:

On-board push buttons and status LED

Modes:

(4) Factory Default
(1) Fully Custom
Selectable Fail Safe/Fail Secure

Coverage:

Max. 10’W x 10’H
Horizontal and Vertical Adjustment (Mechanical)
Sensor Sensitivity/Range (Electronic)

Time Delay:

Adjustable, 5, 15, 30, 45 & 60 second

Sounder:

ON/OFF, with Adjustable Volume

Piezo Buzzer:

92 db. @ 10cm

Indicator:

Activation LED

Card or Keypad Input:

(1) N/O

Door Position Switch Input:

(1) N/O

Request to Exit Input:

(1) N/O

Tamper Switch Contact Rating:

50 mA 12 VDC

Temp Operating Range:

32°F-120°F (0-50°C)

Humidity Range:

0- 93% Non-Condensing

Dimensions:

1-3/4″H x 7″W X 1-3/4″D
(43mm x 176mm x 43mm)

Weight:

0.25 Lbs. (0.12 Kg.)

Color:

White

12~24 VDC Operating voltage

24.150GHz Microwave Doppler technology

10ft (3m) Sensing range, adjustable

Adjustable relay output time, 1~33 s

Small size allows for a wide range of applications

Universally compatible, install the sensor above doors for no-touch ingress/egress

More consistent detection in large areas and over a wide range of temperatures

Indoor use only

Cable Length

8′ (2.5m)

Operating voltage

12~24 VDC

LED Indicator

Red on relay activation

Current Draw

Standby: 23mA@12VDC/14mA@24VDC Active: 39mA@12VDC/21mA@24VDC

Sensing Range

3’~10′ (0.9~3m), adjustable

Reaction time

5cm/s

Sensor Frequency

24.150GHz

Operating Temperature

-4°~131° F (-20°~55° C)

Dimensions

3-1/8″x2-3/8″x2-1/8″ (80x60x54 mm)

Weight

2.5-oz (70g)

Relay Output

2A@30VDC (0.5A@125VAC) Dry relay, NO/NC/COM

3-28VDC, surface mount

Low current draw
of 35mA@12VDC

No wiring required between the sensor and speaker; when tripped, the sensor wirelessly transmits to any
programmed speaker

Weatherproof IR photoelectric beam sensor for outdoor use

Speaker makes “ding-dong” or siren sound if beam is interrupted

Speaker volume can be adjusted or turned off

When in siren mode, sounding time is adjustable from 3~30 seconds

Connect additional speakers to the sensor wirelessly (one speaker included)

Includes the following:
– Weatherproof wireless reflective sensor (Tx)
– Wireless speaker (Rx)
– Reflector
– Two power adapters
– Three mounting brackets: One each for the sensor, reflector,
and speaker

Type

Wireless Weatherproof Entry Alert System

Operating Frequency

433.92 MHz

Operating voltage

Sensor & Speaker- 12VDC (adapter included)

Range

Sensing- Up to 22ft (7m), Wireless- Up to 328ft (100m)

Operating Temperature

32º~122º F (0º~50º C)

Current Draw

Sensor- Active: 20mA, Standby: 5mA; Speaker- Active: 100mA, Standby: 25mA

Light Source

IR LED

Speaker Volume

0~90 dB

Alarm Time Range

3~30 s (Adjustable)

Dimensions

Sensor- 3-1/4″ x 2-9/16″ x 1-1/2″ (82 x 65 x 37mm), Speaker- 3-1/4″ x 2-15/16″ x 1-9/16″ (83 x 75 x 40mm), Reflector- 2-3/8″ x 2-1/16″ x 3/8″ (60 x 52 x 9mm)

Speaker Output

Chime / Off / Alarm (selectable)

Downloads:

Datasheet

Manual

Features:

Retro-reflective design

Perfect for monitoring an entrance or use as an
entrance indicator

Will make “ding-dong” sound or siren sound when the beam
is interrupted

Speaker volume can be adjusted or
turned off

When in siren mode, sounding time is adjustable from 3 to
30 sec.

9VDC adapter included

All components plug into each other. No hard wiring required. 32ft Cable from speaker
to sensor

Includes the following:

NIR retro-reflective sensor.

Reflector.

Speaker.

9VDC 200mA power adapter.
6ft cable

​ ​Typical Applications:

Safety sensor for
garage doors

Overhead doors
security sensor

Entry detection for
store front

Other applications: offices, schools, warehouse, vehicle
detection, etc.

Type

NIR Retro-Reflective Entry Alert System

Sensing Range

22′ (7m)

Operating Voltage

Sensor: 9-15 VDC, Chime: 9~15 VDC

Total Current Draw

100mA Max.

Standby Current

30mA Max.

Operating Temperature

-4º~122º F (-20º~50º C)

Speaker Response Time

~1 sec. for Chime, 30 sec for Alarm

Speaker Volume

Adjustable from 0~max

Alarm Time Range

Adjustable 3~30sec for alarm

Speaker Output

Chime / Off /Alarm (select by switch)

Mounting Brackets

All included

Light Source

IR LED

Downloads:

Datasheet

Manual

Up to 1,000ft (305m) transmission range*

18 programmable ringtones

Connect up to 4 wireless transmitter accessories

Audible and visual alert via built-in speaker and flashing light

Wall or desktop mountable

Output terminals for optional auxiliary device

Each channel independently programmable

Kit Includes:
Wireless Receiver (RA-4961Q) and Wireless Pushbutton (RA-4961-PBQ)
Complete Wireless Alert System and Accessories Product Information
Specifications

Frequency

914.8MHz

Channels

1

Transmission Range

Up to 1,000ft (305m)

Power Supply

CR2032 Battery (included), 6VDC power adapter (X-HKP06-06005 – not included)

Current Draw

Standby- 0.2μA, Max- 16mA

Estimated Battery Life

400 days (3 triggers/day)

Low Battery Indicator

Zone LED on receiver blinks continuously

Enclosure

IP45

Operating Temperature

-4°~140°F (-20°~60°C)

Dimensions

1-5/16” x 11/16” x 3-7/16” (34 x 18 x 87 mm)

Frequency

914.8MHz

Channels

4

Accessories per Channel

1

Relay Output (Channel 4 Only)

1 (Form C Relay), 1A@50VDC

Power Supply

3 “C” batteries or 6VDC power adapter (Both not included)

Estimated Battery Life

270 days (3 triggers/day)

Receiver Low Battery Indicator

Notification LED flashes every 5 seconds

Accessory Low Battery Indicator

Zone LED for accessory blinks continuously

Sound Level

Up to 96dB@1ft (30cm)

Operating Temperature

32°~140°F (0°~60°C)

Dimensions

5-1/4” x 1-9/16” x 6-5/8” (133 x 40 x 169 mm)

Exit Detector W/O Piezo Buzzer / Alarm

Operating Voltages:12-28VDC

Line Draw: 50mA

Relay Action: Timed

Relays: 1

Relay Type: SPDT

Timer Duration: .5 – 60 Seconds

Sensor Technology: Passive Infrared PIR

Range: 10-20 Ft.

PN: TREX-LT

Manufacturer: Kantech

38mA max at 24VDC, 35mA at 12VDC

Hands free release for electromagnetic locks

Ideal for “request to exit” with electromagnetic locks

Adjustable setting for precise detection area desired

Adjustable-relay latch time delay (2-60 sec)

Two Form C relays (rated 2A at 30VDC)

SPDT switch configuration

Available in Gray or Black

2 Year Limited Warranty

Warranty: 2 Year Limited Warranty

Dimensions: 6-1/4″W x 1-13/32″H x 1-1/2″D (159mm x 36mm x 38mm)

Features and Benefits:
The 915 passive infrared device is a hands-free egress switch. The RCI 915 is ideal for request to exit applications that use electromagnetic locks. The hands-free switch is adjustable to allow for precise detection of the desired area. The RCI 915 is configured as a SPDT switch with an adjustable relay latch time delay of 2-60 seconds.
Download:
Installation Manuel

The ENFORCER SA-027HQ Annual Timer
can be programmed to operate two relays 24 hours a day, over the course of an entire year. These relays can be used to control devices in many applications such as security, access control, lighting, and environmental control. The two Form C relays can each be programmed to operate in shunt or momentary mode for up to 50 unique events. Each event can be programmed on a weekly or daily schedule. Block programming allows events to be repeated on consecutive days. 10 Programmable holidays disable the timer for a single day, or for the same day every year.

Two N.O. or N.C. Form C relays 10A@14VDC

Each relay can be programmed for 50 events, for a total of 100 individual programmable events

The 100 programmable events can be set weekly, daily, or hourly, over the course of an entire year

Password protection can be turned ON or OFF

One egress input per relay (2 total)

Block programming allows events to be repeated on consecutive days

First-person-in function interrupts the normal operation of the annual timer

Event outputs can be programmed disable, ON, OFF, shunt, or momentary (1~99 seconds)

10 Programmable holidays

Can be programmed for password protection

Tandem mode allows both relays to operate simultaneously

EEPROM Memory for safe data protection in case of power failure

Built-in clock backup battery

Built-in backup battery charger for external backup battery use

Compensates for leap years

Can be set for Standard or Daylight Saving Time

Alphanumeric backlit LCD display for easy programming

Operating voltage

12~24 VDC/VAC

Number of Relays

2

Relay Rating

10A@14VDC

Current Draw

100mA@12VDC

Number of Programmable Events

50 for each relay, 100 total

Blue LED

On- Power is ON, OFF- Power is OFF

Number of Programmable Holidays

10

Battery Charging Current

90mA

Security Code

4-digits, numeric, ON/OFF

Dimensions

4-3/16″ x 3-1/16″ x 1-1/4″ (107 x 78 x 31 mm)

Range: 45ft (14m)

Weatherproof (IP66) construction for indoor/outdoor use

Pre-wired 6ft (1.8m) cord

Bracket and mounting hardware included for both sensor and reflector

Adjustable sensing range

Compact size

Monitoring method: N.C., 10kΩ resistor

Typical Applications

Sensor for garage doors, outdoor gates or overhead doors

Industrial automation sensor to detect objects on manufacturing line

Entry detection for store fronts

Assist in measuring parking distance

Alarm sensor

Specifications

Type

Retro Reflective Photoelectric Beam Sensor

Current Draw

Standby- 70mA@12VDC, Active- 55mA@12VDC

Sensing Range

0.5′ to 45′ (0.2 – 14m)

Operating Voltage

12-30VDC/AC 60Hz, 100mA

Reaction time

10mS

Light Source

IR LED

LEDs – Red

Power on

LEDs – Yellow

Alignment

Alarm Output

SPDT Relay Output (NO/NC/COM)

Switching Capacity

2A@30VAC/VDC

Operating Temperature

-4º~131º F (-20º~55º C)

Enclosure

IP66 Waterproof

Mounting Brackets

Included

Downloads

Manual

Datasheet