Pemko | Alliance Locksmith

Pemko – 330AS – 84″ Weatherstrip Perimeter Gasketing – Silicone Seal Insert – Mill Aluminum Finish

Alliancelocksmith — Thu, 23 May 2024 18:19:48 +0000

Category J gaskets for use with listed steel frames and/or classified steel covered composite, hollow metal doors rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and wood core doors rated for 20 minutes.
Features:

LENGTH:
84
” (2133.6 mm)

WIDTH:
7/8” (22.2 mm)

HEIGHT:
1/4” (6.4 mm)

WEIGHT:
Estimated per foot: 0.07 lbs

MATERIAL:
6063-T6 Aluminum Alloy and Temper

Rigid jamb weatherstrip is shown mounted on openings with 1/16″ gaps; however, each weatherstrip can seal gaps up to the depth of its seal

Stainless steel fasteners are standard. Other fasteners are available

Punched on 6″ center with slotted holes for adjustment

Ratings:

GreenGuard GOLD Certification
– Tested to UL2818 and achieved GOLD certification for low V.O.C. content – ulspot.com for certificate

Air Infiltration Tested
– Tested to ASTM E-283-04 (2012) for low air leakage allowance; allows no more than 0.3 cfm per square foot at 1.57 psf.

Sound Tested
– Tested to ASTM E90 – 2009 in a single or in multiple sound seal configurations for sound attenuation in an opening

Smoke Tested
– Tested to UL 1784 and meets the requirements of NFPA 105-2013 for smoke leakage in an opening; allows no more than 3.0 cfm per square foot at 0.10” water column (about 75 Pa).

Fire Rated
– Tested to UL10B Standard Fire Tests and UL10C Positive Pressure Fire Tests of Door Assemblies

BHMA Certified
– Tested for performance with regards to the requirements in: ANSI/BHMA A156.22 – Door Gasketing and Edge Seal Systems

Downloads:

Category Specification

Installation Instructions

Cut sheet

Tech sheet

Pemko – 171A – Saddle Threshold – 36” – Mill Aluminum Finish

Alliancelocksmith — Thu, 23 May 2024 18:19:24 +0000

The
Pemko 171A
fluted saddle threshold for commercial door openings is our most popular and top-selling threshold. Saddle thresholds are symmetrically shaped and designed to seal the area under a door while creating a more finished look for commercial applications.
Features:

MATERIAL:
6063-T6 Aluminum Alloy and Temper Retainer

WIDTH:
5” (127.0 mm)

HEIGHT:
1/2” (12.7 mm)

LENGTH:
36″ (914.4 mm)

Ratings:

Barrier-Free (ADA) – Meets the requirements of ADAAG-2010 (Amended) and ANSI A117.1-2009 for:
– Overall height is no greater than ½”
– A vertical rise no more than ¼” and/or change in elevation being beveled with a slope of 1:2
– Does not require more than 5lbs of operating force
– Non-Skid/Pemkote – Meets the requirements of ASTM D 2047, UL 410, and Federal Specifications P-F430C for high static coefficient of friction resulting in a slip resistance surface

Fire Rated – Tested to UL10B Standard Fire Tests and UL10C Positive Pressure Fire Tests of Door Assemblies

BHMA Certified – Tested for performance with regards to the requirements in: ANSI/BHMA A156.21 Thresholds

Downloads:

Category Specification

Installation Instructions

Cut Sheet

Tech sheet

Pemko – 315CN – 36″ Bottom Door Sweep – EPDM Insert – Clear Anodized Aluminum Finish

Alliancelocksmith — Thu, 23 May 2024 18:19:23 +0000

The
Pemko 315CN
door sweep with EPDM insert is applied to the bottom face surface of a door to prevent air, sound, smoke, insects, rodents, and water from entering a room.
Commonly used on the exterior of outswing doors in conjunction

with a saddle threshold.
Specifications:

LENGTH:
36
” (914.4 mm)

WIDTH:
1/4” (6.4 mm)

HEIGHT:
1-11/16″ (42.86 mm)

WEIGHT:
Estimated per foot: 0.15 lbs

MATERIAL:
6063-T6 Aluminum Alloy and Temper

Ratings:

Air Infiltration Tested
– Tested to ASTM E-283-04 (2012) for low air leakage allowance; allows no more than 0.3 cfm per square foot at 1.57 psf.

Sound Tested
– Tested to ASTM E90 – 2009 in a single or in multiple sound seal configurations for sound attenuation in an opening

Smoke Tested
– Tested to UL 1784 and meets the requirements of NFPA 105-2013 for smoke leakage in an opening; allows no more than 3.0 cfm per square foot at 0.10” water column (about 75 Pa).

Fire Rated
– Tested to UL10B Standard Fire Tests and UL10C Positive Pressure Fire Tests of Door Assemblies

BHMA Certified
– Tested for performance with regards to the requirements in: ANSI/BHMA A156.22 – Door Gasketing and Edge Seal Systems

Downloads:

Category Specification

Installation Instructions

Cut sheet

Tech sheet

Pemko – S88 – Adhesive-Backed Smoke Gasketing – 18′ – Black

Alliancelocksmith — Thu, 23 May 2024 17:50:47 +0000

The
S88
is an adhesive-backed bulb silicone gasketing product installed on the perimeter of a door opening to slow/prohibit the passage of smoke, fire, weather, sound and dirt.
Features:

High-temperature silicone

Self-extinguishing and non-toxic

Longest-lasting commercial grade door seal

Seals against smoke, fire, air, sound, and weather

Unaffected by sunlight, ozone, and ultraviolet rays

Impervious to fungus and mildew

Excellent compression; door latches easily

Seal begins compressing at 1/4″ – Compresses to seal up to a 1/16″ gap

Ratings:
Air Infiltration Tested

Intertek Testing (Warnock Hersey)

Sound Tested – ASTM E90

BHMA Certified

Smoke Tested – UL1784

Fire Rated – Edge Seals – UL10C – Positive Pressure

Underwriters Laboratory 4L10

GREENGUARD Gold Certified
Downloads:

Installation Instructions

Cut Sheet

Tech sheet