Programming Adapter | Alliance Locksmith

The Diagnostic Box – TDB013 – OBD Port Protector & Booster

Alliancelocksmith — Fri, 24 May 2024 06:08:10 +0000

The Diagnostic Box TDB013 OBD Power Protector & Booster
has been designed to protect your investment from being damaged by issues with the vehicle you are testing. Many vehicles can exhibit unknown problems and plugging in a piece of equipment worth thousands of pounds is sometimes a gamble.
With jump packs, booster packs and car chargers the amount of interference, voltage spikes and voltage surges can easily damage expensive equipment. The TDB013 adds an additional level of insurance and offers the protection you need. The TDB013 will take the damage rather than your expensive diagnostic equipment, and it won’t leave you without your equipment for days and maybe even weeks while you get it repaired.
An additional clever feature of the TDB013 is its ability to manage the supply voltage that is on Pin 16 of the OBD port. This varies depending on the vehicle, condition of the battery and the wiring from the battery to the OBD port. It is not uncommon to have only 11 volts at the OBD port when the battery is at 12 volts. The TDB013 will maintain 12 volts to your diagnostic equipment regardless whether the OBD port is at 10 volts or even 15 volts. It will maintain a fixed 12 volts DC to pin 16. This means it will smooth out any changes in voltage due to overcharging, boost packs or battery chargers which can cause havoc with anything connected to the vehicle. In addition, if the battery level is a little on the low side, and the diagnostic equipment requires 12 volts to function, they have a fixed 12 volts even when the battery is at 10 volts can be a real plus when trying to diagnose a vehicle problem.

Features

LED Indicators

Manage Pin 16 Supply Voltage

Maintains Constant 13 Volt Output

Specifications

Dimensions

85mm (3.35″) L x 45mm (1.77″) W x 25mm (0.98″) H

Max Continuous Input Voltage

24 Volts (clamping will occur at 27~30V)

Minimum Input Voltage

5 Volts

Continuous Current

1 Amp

Maximum Load Current

2 Amps (for 1 minute)

DC to DC Converter Frequency

~300 kHz

Efficiency

80% @ 1 Amp

Nominal Output Voltage

13 Volts

Input Current Protection

5 Amp resettable fuse

Temperature Range

32 to 122 Degrees F
0 to 50 Degrees C

IP Rating

IP10

Input Connector

OBD 16pin Male

Output Connector

OBD 16pin Female

Downloads

Spec Sheet
Operating Manual

Yanhua – ACDP – BMW – Replacement CAS4 / CAS4+ Board for Mini ACDP Module #1

Alliancelocksmith — Fri, 24 May 2024 05:51:57 +0000

Replacement board for Mini ACDP . Allows you to Read/write BMW CAS4 CAS4+ Data No Need for Soldering. This is the same board found in
ACDP Module #1

Yanhua – ACDP – BMW – Replacement CAS1 Board for Mini ACDP Module #1

Alliancelocksmith — Fri, 24 May 2024 05:51:56 +0000

Replacement board for Mini ACDP. Allows you to read/write BMW CAS1 Data; no need for soldering. This is the same board found in
ACDP Module #1

Yanhua – ACDP – BMW – X5 / X7 Bench Interface Board for BMW N47 / N57

Alliancelocksmith — Fri, 24 May 2024 05:51:56 +0000

ACDP BMW X5/X7 Bench Interface Board for BMW N47/N57 Diesel DME ISN Read/Write and Clone
Function:

Supports BMW E chassis N47（EDC17C06）diesel DME ISN read/write and clone.
Supports BMW E chassis N57（EDC17CP09）, F chassis N57（EDC17CP09）diesel DME ISN read/write and clone.
Advantages:
No need to open DME shell, no need to drill hole in DME, no need to plug wire
The special interface board connection method replaces the traditional plugging wire method to prevent plugging the wire in backwards or wrong place; simple and efficient, plug and play, safe and reliable.
This item includes a free license for BMW N47/N57 Diesel DME ISN Read/Write
Clone function requires separate license

Yanhua – ACDP – BMW – X4 / X8 Bench Interface Board for BMW N12 / N14 / N45 / N46 DME ISN Read / Write and Clone

Alliancelocksmith — Fri, 24 May 2024 05:51:30 +0000

ACDP BMW – X4 / X8 Bench Interface Board for BMW N12 / N14 / N45 / N46 DME ISN Read / Write and Clone
Function:
– Support BMW MINI R chassis N12(MEV172)/N14(MED172) DME ISN read/write and clone.
– Support BMW E chassis N45(ME1721)/N46(MEV1721) DME ISN read/write and clone.
Advantages:
– No need to open DME shell, no need to drill hole on DME, no need to plug wire.
– The special interface board connection method replaces the traditional plugging wire method to prevent plug wire to opposite direction and wrong place, simple and efficient, plug and play, safe and reliable.
This item includes a free license for BMW N12/N14/N45/N46 isn read and write.
Clone function requires separate license.

Yanhua – ACDP – BMW – Replacement CAS2 Interface Board for Mini ACDP Module #1

Alliancelocksmith — Fri, 24 May 2024 05:42:12 +0000

Replacement board for Mini ACDP. Allows you to read/write BMW CAS2 Data; no need for soldering. This is the same board found in
ACDP Module #1

Yanhua – ACDP – Jaguar / Land Rover KVM Interface Board

Alliancelocksmith — Fri, 24 May 2024 04:24:47 +0000

ACDP Jaguar / Land Rover KVM Bench Interface Board for used to connect to KVM test points
This is a replacement interface board found in

Land Rover / Jaguar – Module #9 for Mini ACDP

Vxscan – BMW EWS-4.3 & 4.4 IC Adaptor for XPROG-M, AK90 and R270 Programmers

Alliancelocksmith — Fri, 24 May 2024 04:09:35 +0000

This is a
Vxscan BMW EWS-4.3 & 4.4 IC Adaptor
for XPROG-M or
AK90
and R270 Programmers. It allows you to read & write data dump from an EWS immobilizer without the need to do any soldering.
Package Includes:

Main Hardware

Longer Cable

Short Cable

Small Circuit Board

When Working with
AK90 Programmer
:

Must use the small circuit board for the reading

Select “2L86D” in the AK90 Software

When Working with X-PROG Programmer:

No need for the small circuit board

Select “MC9S12-EEPROM-secured” under “MCU/MPU” in the X-PROG software

When Working with R270 Programmer:

Must use the longer cable

Select “ 2L86D” when prompted to select software and then select the type of reading you wish to do “ EPROM or FLASH”

IMPORTANT NOTE:
This a 3rd Party Tool, We offer NO support and No Warranty
This tool is very fragile and can be damaged from moisture, high or low temps, bad outlets, dropping it, etc
If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another CK100 but we will not refund or replace the machine.

Yanhua – ACDP BAV-KEY – BMW – Land Rover – Porsche Key Adapter

Alliancelocksmith — Fri, 24 May 2024 04:03:16 +0000

The BAV-KEY Adapter
is for use with the
Mini ACDP
and the following modules

BMW – Modules #1 to #4

Land Rover / Jaguar – Module #9

Porsche – Module #10

It allows easy and faster Identifying , Data Writing and Data Matching

Yanhua – ACDP – Porsche BCM Interface Board

Alliancelocksmith — Fri, 24 May 2024 03:48:24 +0000

ACDP Porsche BCM Interface Board
This is a replacement interface board found in

Porsche- Module #10 for Mini ACDP