The
8800 Series Electrified Narrow Stile Rim Exit Device
is designed for
narrow stile aluminum applications that require a life-safety exit
device with Starwheel interlocking solution. Designed for use in
applications with single doors or pairs of doors with a mullion.

More Details Below

Features

Certifications

UL 305 Panic Hardware
ANSI/BHMA A156.3-2008 Grade 1
ANSI/BHMA A156.3-2014 Grade 2

Electrification

Electric Latch Retraction (EL) – 12 Volts

Materials

Push bar made of extruded aluminum,
clad or anodized in a variety of finishes

Handing

Device is non-handed.

Push bar Length

Standard size: 36″ [914.4 mm] Standard width bars can be field cut to the next smallest opening width.

Door Thickness

Suits 1-3/4″ [44.5 mm] standard, up to 2-1/4″ [57.2 mm].

Stile Width

Minimum 2″ [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doors

Projection

2-5/8″ [66.7 mm] when fully projected,
1-5/8″ [41.3 mm] when dogged.

Dogging

Standard dogging with hex key or optional cylinder dogging.

Fasteners

Standard machine screws.

Cylinders

Fits any standard 1-5/32″ [29.4 mm] diameter rim cylinder

Strike

Standard strike and narrow
versions for centering doors in 4″
jamb (both strikes included).

Download Installation Instructions Here

New design! Easy to install!

New end caps come off and go on in seconds

Designed to allow egress from inside an area normally locked by an electric lock or electromagnetic lock, and/or to disarm (shunt) or trigger an alarm when the door is opened

Rugged, heavy-duty construction

Pushing the bar at any point sends a signal to release the lock and/or sound an alarm

For 36 inch doors (actual length is 34.5 inches)

Includes 2 built-in non-latching (momentary), dual-contact switches (NO/COM/NC), rated 25A@24VAC

Attractive brushed-aluminum bar with black base and trim

Includes SECO-LARM SD-969-A18Q Armored Door Cord, and mounting hardware (for mounting in wood or metal doors)

Designed for easy cutting in field to match width of non-standard-sized doors

Circuit Type

2 Built-in momentary dual contact NO or NC contacts

Contact Rating

25A@24VAC

Door Size

For 36” doors (actual size: 34-1/2”)

Dimensions

34-1/2”x2-3/4”x2-13/32” (876x70x61 mm)

Weight

7-lb (3kg)

The
8800 Series Electrified Narrow Stile Rim Exit Device
is designed for narrow stile aluminum applications that require a life-safety exit device with Starwheel interlocking solution. Designed for use in applications with single doors or pairs of doors with a mullion.

More Details Below

Features

Certifications

UL 305 Panic Hardware
ANSI/BHMA A156.3-2008 Grade 1
ANSI/BHMA A156.3-2014 Grade 2

Electrification

Electric Latch Retraction (EL) – 24 Volts

Materials

Push bar made of extruded aluminum,
clad or anodized in a variety of finishes

Handing

Device is non-handed.

Push bar Length

Standard size: 36″ [914.4 mm] Standard width bars can be field cut to the next smallest opening width.

Door Thickness

Suits 1-3/4″ [44.5 mm] standard, up to 2-1/4″ [57.2 mm].

Stile Width

Minimum 2″ [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doors

Projection

2-5/8″ [66.7 mm] when fully projected,
1-5/8″ [41.3 mm] when dogged.

Dogging

Standard dogging with hex key or optional cylinder dogging.

Fasteners

Standard machine screws.

Cylinders

Fits any standard 1-5/32″ [29.4 mm] diameter rim cylinder

Strike

Standard strike and narrow
versions for centering doors in 4″
jamb (both strikes included).

Download Installation Instructions Here

narrow stile aluminum applications that require a life-safety exit
device with Starwheel interlocking solution. Designed for use in
applications with single doors or pairs of doors with a mullion.

More Details Below

Features

Certifications

UL 305 Panic Hardware
ANSI/BHMA A156.3-2008 Grade 1
ANSI/BHMA A156.3-2014 Grade 2

Electrification

Electric Latch Retraction (EL) – 24 Volts

Materials

Push bar made of extruded aluminum,
clad or anodized in a variety of finishes

Handing

Device is non-handed.

Push bar Length

Standard size: 36″ [914.4 mm] Standard width bars can be field cut to the next smallest opening width.

Door Thickness

Suits 1-3/4″ [44.5 mm] standard, up to 2-1/4″ [57.2 mm].

Stile Width

Minimum 2″ [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doors

Projection

2-5/8″ [66.7 mm] when fully projected,
1-5/8″ [41.3 mm] when dogged.

Dogging

Standard dogging with hex key or optional cylinder dogging.

Fasteners

Standard machine screws.

Cylinders

Fits any standard 1-5/32″ [29.4 mm] diameter rim cylinder

Strike

Standard strike and narrow
versions for centering doors in 4″
jamb (both strikes included).

Download Installation Instructions Here

ADR-8099-M1-3136

The 8099 Electrified Dummy Push Bar
is designed for narrow stile aluminum, hollow metal, and wood applications that do not require a latching/locking life-safety exit device.
Dummy Push Bar with no latch mechanism but with either single or dual monitor/signal switches. May be used in conjunction with a maglock, where the push bar turns off the magnet and allows exit from the building. Dual switch version allows redundancy where required by code or the operation of a signal device. Designed for applications with single or pairs of doors.

More Details Below

Features

Materials

Push bar made of extruded aluminum, available variety of architectural finishes.

Door Type

For Aluminum Doors

Stile Width

For aluminum applications: minimum 2″ [50.8 mm] stile.

Push Bar Length

Standard 36″ [914.4 mm],

Monitor

1 Active Dummy Bar, one monitoring switch

Fasteners

Standard machine screws

Download Installation Instructions Here

ADR-8099-M1-3236

The 8099 Electrified Dummy Push Bar
is designed for narrow stile aluminum, hollow metal, and wood applications that do not require a latching/locking life-safety exit device.
Dummy Push Bar with no latch mechanism but with either single or dual monitor/signal switches. May be used in conjunction with a maglock, where the push bar turns off the magnet and allows exit from the building. Dual switch version allows redundancy where required by code or the operation of a signal device. Designed for applications with single or pairs of doors.

More Details Below

Features

Materials

Push bar made of extruded aluminum, available variety of architectural finishes.

Door Type

For Aluminum Doors

Stile Width

For aluminum applications: minimum 2″ [50.8 mm] stile.

Push Bar Length

Standard 36″ [914.4 mm],

Monitor

1 Active Dummy Bar, one monitoring switch

Fasteners

Standard machine screws

Download Installation Instructions Here

ADR-8802ELXXXX

The
8800 Series Electrified Narrow Stile Rim Exit Device
is designed for
narrow stile aluminum applications that require a life-safety exit
device with Starwheel interlocking solution. Designed for use in
applications with single doors or pairs of doors with a mullion.

More Details Below

Features

Certifications

UL 305 Panic Hardware
ANSI/BHMA A156.3-2008 Grade 1
ANSI/BHMA A156.3-2014 Grade 2

Electrification

Electric Latch Retraction (EL) – 24 Volts

Materials

Push bar made of extruded aluminum,
clad or anodized in a variety of finishes

Handing

Device is non-handed.

Push bar Length

36″ [914.4 mm] Standard width bars can be field cut to the next smallest opening width. Also Available in 42″ length.

Door Thickness

Suits 1-3/4″ [44.5 mm] standard, up to 2-1/4″ [57.2 mm].

Stile Width

Minimum 2″ [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doors

Projection

2-5/8″ [66.7 mm] when fully projected,
1-5/8″ [41.3 mm] when dogged.

Dogging

Standard dogging with hex key or optional cylinder dogging.

Fasteners

Standard machine screws.

Cylinders

Fits any standard 1-5/32″ [29.4 mm] diameter rim cylinder

Strike

Standard strike and narrow
versions for centering doors in 4″
jamb (both strikes included).

Download Installation Instructions Here

Features

Certifications

UL 305 Panic hardwareANSI/BHMA A156.3-2008 Grade 1ANSI/BHMA A156.3-2014 Grade 2

Electrification

Motorized Latch Retraction (MLR) –
Using a Power Supply, MLR provides momentary or continuous latch and push bar retraction.

Materials

Push bar made of extruded aluminum,clad or anodized in a variety of finishes

Handing

Device is non-handed.

Push bar Length

Standard size: 36″ [914.4 mm] Standard width bars can be field cut to the next smallest opening width.

Bar Height

Standard model adjusts from 30″ [762 mm] to 44″ [1117.6 mm].

Door Thickness

Suits 1-3/4″ [44.5 mm] standard, up to 2-1/4″ [57.2 mm]. Device requires modification when used with cylinder in doors over 1-3/4″ [44.5 mm].

Door Height

Standard configuration suitable for doors up to 66″ [1,676.4 mm] above the selected bar height.

For doors over 66″ [1,676.4 mm] above bar height, up to 10′ [3.05 m] use 8655 Tall Door Kit SOLD Separately

Stile Width

Minimum 2″ [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doors

Projection

2-5/8″ [66.7 mm] when fully projected,1-5/8″ [41.3 mm] when dogged.

Dogging

Standard dogging with hex key or optional cylinder dogging.

Fasteners

Standard machine screws.

Cylinders

Accepts any standard 1″ [25.4 mm] length, 1-5/32″ [29.4 mm] diameter mortise cylinder with MS® cam.r. Accommodates cylinder lengths from 1″ [25.4 mm] to 1-1/4″ [31.8 mm]

Cylinder x Fixed Pull Functions

For entry trim function 03 (Night latch – key releases latch) select any standard 1″ [25.4 mm] length, 1-5/32″ [29.4 mm] diameter mortise cylinder with MS® cam such as the 4036 Mortise Cylinder. Accepts any standard mortise cylinder with MS® cam. If key entry operation is required, any standard mortise cylinder with MS® cam can be installed through an 8650 Cylinder Escutcheon. 8650 Cylinder Escutcheon Kit available separately.

Entry Trim Functions

For entry trim function 08 (key locks/unlocks lever) or function 09 (key releases lever) select any standard 1″ [25.4 mm] length, 1-5/32″ [29.4 mm] diameter mortise cylinder with MS® cam such as the 4036 Mortise Cylinder. Accommodates cylinder lengths from 1″ [25.4 mm] to 1-1/4″ [31.8 mm]. Available separately.

Bolts and Strikes

The patented top latching mechanism utilizes a rotating top bolt which deadlatches around the header strike, interlocking the door to the frame. Supplied with standard header strike. Adjustable protected steel rods. The hexagonal, hardened steel bottom bolt is shielded in a cast housing for strength and stability.

Download Installation Instructions Here
The differences between SE – Silent Entry (Motorized Latch Retraction) and LR (Electric Latch Retraction)
Using a Power Supply,
SE(Motorized Latch Retraction)
provides momentary or continuous latch and push bar retraction. SE-MLR devices are quieter and require less current than LR (Electric Latch Retraction) devices. This is due to the motor in the SE-MLR devices in lieu of the solenoid found in Electric LR devices. In addition, Electric LR devices only retract the latch while SE-MLR devices retract the latch and the push bar.

Water Sealed Switches –
The MSB550W features a high-quality watertight miniature snap action switch with a monoblock construction, ensuring high sealing capacity. Switch body meets IP67 (IEC 529) requirements.

Heavy Duty Construction –
The MSB550W utilizes heavy-duty aluminum extrusion and rugged end< caps. The mounting assembly is all metal. The rigid construction prevents any malfunction. Only 1/8” Total Bar Movement - The MSB550W has a maximum movement of only .125”. Trigger activation to release the electromagnetic lock is quick and quiet. Perfect Companion for Gate Lock Solutions - The MSB550W’s watertight switches makes it a perfect companion for outdoor gate solutions. For additional system components, see back page. Includes PT-3 Stainless Steel Shielded Power Cord Finish 628 Anodized Aluminum Physical Appearance Touch Bar Handing Non-Handed Device Type Exit Pushbar Device Device Length 36 In. Weather Sealed IP67 Rated Operating Temperature -40°F to 185°F Contact 2 SPDT, 3 Amp @ 30VDC (RESISTIVE) Manufacturer Security Door Controls Download : Datasheet Installation Instructions

Factory-installed motorized electric latch retraction and dogging

Durable stainless steel construction

Corrosion-resistant

Scratch, fingerprint, and impact-resistant touchpad

Compact industrial design

Variety of function choices

Request-to-exit (REX)

Finish:

628 Anodized Aluminum

Door Width:

36″

Door Height:

—–

Door Stile:

Wide (4” Minimum)

Device Type:

RIM

Handing:

Non-Handed

Headcover:

Stainless Steel

Rail:

Stainless Steel

Pushpad:

Stainless Steel

Pushpad Protective Guard:

Nylon 6/6 (30% Glass Fill)

End Cap:

Stainless Steel

Projection:

27/16” Neutral
111/16” Depressed

Latch:

3/4” Throw
Stainless Steel

DeadlatchDeadlatch:

5/8” Throw
Stainless Steel

Vertical Rods:

—–

Input:

24 VDC ± 10%

Current Draw:

700 mA Inrush
200 mA Continuous

Request-to-Exit (REX):

SPDT
10 Amp @ 250 VAC Resistive

Certifications:

UL Listed

Warranty:

Manufacturer 5 Year Warranty

Grade:

Grade 1

Download
:

Datasheet

Installation Instructions