Retraction Kits | Alliance Locksmith

Command Access – Electrified Latch Retraction Kit – For Adams Rite 82 / 84 / 86 / 88 series – 2/18 Gauge – 22 to 28 VDC

Alliancelocksmith — Thu, 23 May 2024 23:05:33 +0000

The Command Access MLRK1-AR is a cost-effective and straightforward way to upgrade your Adams Rite
82
/
84
/
86
/
88
series device to motor-driven latch retraction in the field. Comes with a robust, ground breaking field installable motorized latch retraction kit for Adams Rite 8000 series exit devices. The only hole you’ll need to drill is the raceway! It utilizes our PTS “Push to Set” technology making post-installation adjustments incredibly easy. This next generation offers an overall simplified installation!
Features:

Next Generation MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues

“PTS”: 5 second electronic adjustment for easy post installation adjustment

Electric dogging rated for continuous duty

Low Current Draw – Field switchable to “High Torque” mode

Up to 300’ wire run with 2-18ga wire

8’ cable with Quick Molex Connect for MM4 module to easily connect to power supply lead

Specifications:

Function:

Converts a mechanical Adams Rite 82 / 84 / 86 / 88 series device to an electrified latch pullback device.

Voltage Range:

22 to 28 VDC

System Protection:

Unit shuts down when voltage exceeds 28VDC

Standard – Average Current Peak:

1.3A

Standard –
Average Current Hold:

170mA

High Torque – Average Current Peak:

High Torque – Average Current Hold:

250mA

PTS adjustment:

approx. 1/4”

Wire Run:

300’ with 18ga wire

Device Cutdown Details:

36” – 1” / 42” – 7” / 48” – 5.5”

Certifications:

ANSI/BHMA Meets or exceeds Series Grade 1 requirements
UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Electrified Latch Retraction Kit – For Corbin Russian 4 / 5000 & Yale 7000 series – 2/18 Gauge – 24 to 28 VDC

Alliancelocksmith — Thu, 23 May 2024 23:05:33 +0000

The Command Access MLRK1-COR is a cost-effective and straightforward way to upgrade your Corbin Russian 4/5000 & Yale 7000 series device to motor-driven latch retraction in the field. MLRK1-COR retracts not just the latch/latches but the push pad too. Allowing electronically dogged devices to remain in a push/pull state for as long as it is desired. Patent Pending Push to Set (PTS) Technology allows for an easy post-installation adjustment of the latch/latches. Last but not least, it features our motor module with built-in audible diagnostics & equipped with 2 different torque settings from energy-conscious, to High Torque to get the tough jobs done!
Features:

Next Generation MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues

“PTS”: 5 second electronic adjustment for easy post installation adjustment

Electric dogging rated for continuous duty

Low Current Draw – Field switchable to “High Torque” mode

Up to 300’ wire run with 2-18ga wire

8’ cable with Quick Molex Connect for MM4 module to easily connect to power supply lead

Specifications:

Function:

Converts a mechanical Corbin Russian 4 / 5000 & Yale 7000 series device to an electrified latch pullback device.

Voltage Range:

24 to 28 VDC

System Protection:

Unit shuts down when voltage exceeds 28VDC

Standard – Average Current Peak:

900mA

Standard –
Average Current Hold:

215mA

High Torque – Average Current Peak:

High Torque – Average Current Hold:

250mA

PTS adjustment:

approx. 1/4”

Wire Run:

300’ with 18ga wire

Device Cutdown Details:

36” – 4” / 48” – 10”

Certifications:

UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Electrified Latch Retraction Kit – For Falcon 1690 / 1790 and First Choice 3600 / 3700 series – 2/18 Gauge – 12/24V +/- 10% VDC

Alliancelocksmith — Thu, 23 May 2024 23:05:32 +0000

The Command Access MLRK1-FAL17 is a cost-effective and straightforward way to upgrade your Falcon 1690/1790, First Choice 3600/3700, & AHT 4/5 series device to motor-driven latch retraction in the field. MLRK1-FAL17 features a robust, straightforward field-installable motorized latch retraction kit for Falcon Dor-o-Matic 1690/1790 & First Choice 3600/3700 series exit devices. It utilizes a CAT-designed custom assembly to maximize the pulling force. The only hole you’ll need to drill is the raceway! It uses our new 1 TOUCH PTS “Push to Set” technology, making post-installation adjustments a breeze.
Features:

Next Generation MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues

1 Touch “PTS”: Quick and easy post installation adjustment

Electric dogging rated for continuous duty – Auto re-engage if push pad is pulled from dogged position.

Low Torque Mode – Now capable of pulling all devices, even tall vertical rod doors!

Up to 300’ wire run with 2-18ga wire – Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel.

6’ cable with Robust Quick Molex Connect for MM5 module to 6′ Power Lead to easily connect to power supply.

Specifications:

Function:

Converts a mechanical Falcon 1690 / 1790 or First Choice 3600 / 3700 series device to an electrified latch pullback device.

Voltage Range:

24 +/- 10% VDC

System Protection:

Unit shuts down when voltage exceeds 28VDC

Standard – Average Current Peak:

900mA

Standard –
Average Current Hold:

200mA

PTS adjustment:

approx. 1/4”

Wire Run:

300’ with 18ga wire

Built-in REX:

SPDT rated at .5A @ 24V
Green (C) – Blue (NO) – Gray (NC)

Device Cutdown Details:

36” – 1 1/4” / 48” – 1 1/4”

Certifications:

UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Electrified Latch Retraction Kit – For Falcon 24 / 25 series – 2/18 Gauge – 24-28 VDC

Alliancelocksmith — Thu, 23 May 2024 23:05:31 +0000

The Command Access MLRK1-FAL25 is a cost-effective and straightforward way to upgrade your Falcon 24/25 series device to motor-driven latch retraction in the field. MLRK1-FAL25 can convert a mechanical Falcon 24/25 series device to an electrified latch pullback device. Our easy-to-install motor-driven kit installs in a matter of seconds with no drilling or screws required, a true “drop-in” kit! PTS allows for an easy post-installation adjustment of the latch/latches. A built-in REX switch is standard on all units! Last but not least, features an updated MM4S module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done!
Features:

MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues.

“PTS”: 5 second electronic adjustment for easy post installation adjustment

Electric dogging rated for continuous duty
– Auto re-engage if push pad is pulled from dogged position

Low Current Draw – Field switchable to “High Torque” mode

8’ cable with Quick Connect for MM4S module to easily connect to power supply lead.

Specifications:

Function:

Converts a mechanical Falcon 24/25 series device to an electrified latch pullback device.

Voltage Range:

24-28 VDC

System Protection:

Unit shuts down when voltage exceeds 28VDC

Standard – Average Current Peak:

900mA

Standard –
Average Current Hold:

215mA

High Torque – Average Current Peak:

High Torque – Average Current Hold:

250mA

PTS adjustment:

approx. 1/4”

Wire Run:

300’ with 18ga wire

Device Cutdown Details:

36” – 2” / 48” – 8”

Certifications:

UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Electrified Latch Retraction Kit – For Jackson 1285/1295 & Kawneer 1686/1786 series – 2/18 Gauge – 24-28 VDC

Alliancelocksmith — Thu, 23 May 2024 23:05:31 +0000

The Command Access MLRK1-JAC12 is a cost-effective and straightforward way to upgrade and convert your Jackson 1285/1295, Kawneer 16/17 and PD16 series device to an electrified motor-driven latch pullback exit device in the field. The next generation electromechanical drive offers superior performance to its predecessor. It utilizes a patent pending custom ball screw assembly and CAT designed custom stepper motor to provide remarkably efficient and reliable results. Since our kit retracts the push pad, the device can be electrically dogged allowing the device to remain in a push/pull state, for as long as is desired. Patent Pending Push to Start (PTS)Technology allows for an easy post-installation adjustment of the latch/latches. Last but not least, features an updated MM4 module with 2 different torque settings from energy conscious to high torque to get the tough jobs done!
Features:

MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues.

“PTS”: 5 second electronic adjustment for easy post installation adjustment

Electric dogging rated for continuous duty
– Auto re-engage if push pad is pulled from dogged position

Low Current Draw – Field switchable to “High Torque” mode

8’ cable with Quick Connect for MM4S module to easily connect to power supply lead.

Specifications:

Function:

Converts a mechanical Jackson 1285/1295 & Kawneer 1686/1786 series device to an electrified latch pullback device.

Voltage Range:

24-28 VDC

System Protection:

Unit shuts down when voltage exceeds 28VDC

Standard – Average Current Peak:

1.3 A

Standard –
Average Current Hold:

170mA

High Torque – Average Current Peak:

High Torque – Average Current Hold:

250mA

PTS adjustment:

approx. 1/4”

Wire Run:

300’ with 18ga wire

Device Cutdown Details:

36” – 3” / 48” – 15”

Certifications:

UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Installation Sheet

Command Access – Electrified Latch Retraction Kit – Sargent 80 Series Exit Device – 2/18 Gauge – 24 to 28 VDC

Alliancelocksmith — Thu, 23 May 2024 23:04:11 +0000

The MLRK1-SGT is a practical and cost-effective way to convert a mechanical Sargent 80 series device to an electrified latch pullback device while maintaining the UL listing. Our easy-to-install motor-driven kit installs in moments. It is equipped with PTS technology allowing for an easy post installation adjustment of the latch/latches. Last but not least, the SLP features an updated MM4S module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done!
Features:

Easy installation – underneath the push pad for ultimate cutdown

Fast, quiet, smooth

True Electronic Dogging – Full push pad retraction

Retrofits Sargent 80 series exit devices

MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues

PTS: (Push to Set Technology) 5 second electronic adjustment for easy post installation adjustment

Up to 300’ wire run with 2-18ga wire

Low Current Draw – Field switchable to “High Torque” mode

8’ cable with Quick Connect for MM4S module to easily connect to power
supply lead

Specifications:

Function:

Electrified Latch Retraction Kit – Sargent 80 Series Exit Device

Voltage Range:

24-28 VDC

System Protection:

Unit shuts down when voltage exceeds 28VDC

Standard – Average Current Peak:

900mA

Standard – Average Current Hold:

215mA

High Torque – Average Current Peak:

High Torque – Average Current Hold:

250mA

PTS adjustment:

approx. 1/4”

Wire Run:

300’ with 18ga wire

Device Cutdown Details:

36” – 3” / 48” – 15”

Certifications:

UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Instruction Sheet

Command Access – Electrified Latch Retraction Kit – Von Duprin 33/35 & 98/99 Series – 2/18 Gauge – 24-28 VDC

Alliancelocksmith — Thu, 23 May 2024 23:04:11 +0000

The MLRK1-VD is a practical and cost-effective way to convert a mechanical Von Duprin series device to a motorized latch retraction device, while maintaining the UL listing. Our easy-to-install motor-driven kit installs in moments & includes a built-in request to exit. It is equipped with push-to-set (PTS) technology allowing for an easy post-installation adjustment of the latch/latches. Last but not least, the VLP features an updated MM5 module, energy conscious while still being capable of getting tough jobs done!
Features:

Works on all Von Duprin 99/98 & 35/33 series devices

Fast, quiet, smooth & strong!

Includes built-in request to exit on board

Next Generation MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues

“PTS”: 2 second electronic adjustment for easy post installation adjustment. Simplified further with a push button to engage programming & shorter program sequence.

Standard Torque Mode: Now capable of pulling all types of devices, even the difficult tall Vertical Rods doors!

Electric dogging rated for continuous duty

Up to 300’ wire run with 2-18ga wire

6” cable with robust Quick Molex Connector for MM5 module to 6’ Power lead to easily connect to power supply lead.

Specifications:

Function:

Electrified Latch Retraction Kit – Von Duprin 33/35 & 98/99 Series

Voltage Range:

24-28 VDC

System Protection:

Unit shuts down when voltage exceeds 28VDC

Standard – Average Current Peak:

900mA

Standard – Average Current Hold:

215mA

High Torque – Average Current Peak:

High Torque – Average Current Hold:

250mA

PTS adjustment:

approx. 1/4”

Wire Run:

300’ with 18ga wire

Device Cutdown Details:

36”/ 48” – 6.5” Filler Plate Needed

Certifications:

UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Instruction Sheet

Command Access – Electrified Latch Retraction Kit – Von Duprin 22 Series – 2/18 Gauge – 24-28 VDC

Alliancelocksmith — Thu, 23 May 2024 23:03:46 +0000

The new MLRK1-VD22 is a practical and cost-effective way to convert a mechanical Von Duprin 22 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and is backed by CAT’s 3-year no hassle warranty. It easily hooks into the dogging tail piece and is secured with (2) screws, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. Push to Set (PTS) allows for an easy post-installation adjustment of the latch/latches. A built-in REX switch on all units! Last but not least, the Kit features our updated MM5 module, energy conscious while still being capable of getting the tough jobs done!
Features:

Incredibly easy to install

Low energy motor drive

Works on all 22 series devices

Built-in Request to Exit

Next Generation MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues

PTS: (Push to Set Tech) 2 second electronic adjustment for easy post installation adjustment. Simplified further with a push button to engage programming & shorter program sequence.

Standard Torque Mode: Now capable of pulling all types of devices, even the difficult tall Vertical Rods doors!

Electric dogging rated for continuous duty

Up to 300’ wire run with 2-18ga wire

6” cable with robust Quick Molex Connector for MM5 module to 6’ Power lead to easily connect to power supply lead.

Specifications:

Function:

Electrified Latch Retraction Kit – Von Duprin 22 Series

Voltage Range:

24-28 VDC

System Protection:

Unit shuts down when voltage exceeds 28VDC

Standard – Average Current Peak:

900mA

Standard – Average Current Hold:

215mA

PTS adjustment:

approx. 1/4”

Wire Run:

300’ with 18ga wire

Device Cutdown Details:

36” model 5″ max / 48” model 9″ max

Certifications:

UL Listed 3-hour fire rating

Warranty:

3-Year Manufacturer Warranty

Downloads:

Spec Sheet

Instruction Sheet

SDC – LR100MDK – Electric Latch Retraction Kit – 24V – For Marks M9900 & M9900VR – 36″ Doors

Alliancelocksmith — Thu, 23 May 2024 22:59:28 +0000

The
SDC LR100
Series Electric Latch Retraction Kit enables electric access control and dogging of mechanical exit devices. When energized the motor retracts the exit device latch and pulls the pushpad on most devices into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.
Will Only Work with Marks M9900 and M9900VR
Features:

Motorized Electric Latch Retraction & Dogging for Fire Rated & Non Fire Rated Devices

Retrofits select exit device brands without removing device from the Door

Only Latch head cover and end cover plate removable required for most other brands

Low 700 mA Inrush, 200 mA Continuous @ 24VDC

For access control and sustained dogging applications

Automatic re-trigger if device does not pull on first try

Eliminates need for costly replacement of existing exit device

Significantly less labor and costs compared to competitive
retrofit kits

Low current enables longer wire runs with smaller gauge wire

No door sequencers required for pairs of manual doors

For Standard Door Size 36″

UL Listed

Downloads
:

Datasheet

Installation Instructions

SDC – LR100VDK – Electric Latch Retraction Kit – 24V – For Von Duprin 33/35 & 98/99 – For 36″ to 48″ Doors

Alliancelocksmith — Thu, 23 May 2024 22:59:03 +0000

Motorized Electric Latch Retraction & Dogging for Fire Rated & Non Fire Rated Devices

Retrofits select exit device brands without removing device from the Door

Only Latch head cover and end cover plate removable required for most other brands

Low 700 mA Inrush, 200 mA Continuous @ 24VDC

For access control and sustained dogging applications

Automatic re-trigger if device does not pull on first try

Eliminates need for costly replacement of existing exit device

Significantly less labor and costs compared to competitive
retrofit kits

Low current enables longer wire runs with smaller gauge wire

No door sequencers required for pairs of manual doors

For Door Size 36″ to 48″

UL Listed

Downloads
:

Datasheet

Installation Instructions