SalesEvent-AutelCables&Accessories | Alliance Locksmith

Autel – APA103 – IM508 and IM608 EEPROM Clamp & Cable

Alliancelocksmith — Fri, 24 May 2024 05:38:59 +0000

8 Pin clamp connects to XP200 and XP400 for EEPROM chip read and write.

Autel – Toyota 8A Blade Connector Cable for Autel Key Programmer – (All Keys Lost) AKL Kit

Alliancelocksmith — Fri, 24 May 2024 04:29:57 +0000

The Toyota 8A Blade Connector Cable for Autel Key Programmer – (All Keys Lost) AKL Kit
Used for programming of Toyota / Lexus / Scion 8A bladed keys
No need to disassemble or replace immobilizer in All Keys Lost situation
Supports Toyota Camry, RAV4, Prius, Highlander, Tacoma, Sienna, Levinn 8A mechanical key (non-smart key) all keys lost programming
Note requires Autel Key Programmer
IM508

or
IM608

with

G-Box3
and
APB112
smart key simulator.

Autel – MSOBD2KIT – Non OBDII Adapter Kit – for MSUltra MS919 and MS909

Alliancelocksmith — Fri, 24 May 2024 03:33:41 +0000

The MSOBD2KIT
, compatible with the MSUltra, MS919 and MS909, includes OE-compliant adapters for specific vehicles produced between 1996 and 2002 without the standard OBD2 pin configuration.
Includes:

Nissan-14 Connector

Mitsubishi/Hyundai 12+16
Connector

Kia-20
Connector

BMW-20
Connector

Benz-38
Connector

VW/Audi-2+2
Connector

Mazda-17
Connector

Chrysler-16
Connector

Benz-14
Connector

Molded Carrying Case

1-Year Manufacturer’s Warranty

Autel – Nissan 16+32 OBD Gateway Adapter for B118 Chasis

Alliancelocksmith — Fri, 24 May 2024 03:24:55 +0000

The Autel 16+32 Gateway Adapter for Nissan

With 16+32 gateway adapter, it won’t need the password when adding new key for Nissan Sentra and the car with B18 chassis.
Note: If all keys lost, it will need password to program new key.

Autel – Mercedes Benz IR / Infrared Cable for IM508PRO / IM608PRO Autel Key Programmer

Alliancelocksmith — Thu, 23 May 2024 23:28:13 +0000

This is a replacement Mercedes Benz Infrared Cable for

IM508
PRO

(
involves using the
IM508
along with the
MaxiIM XP400 PRO

together)

and the

IM608 PRO

Autel Key Programming Machines. This Infrared Cable
will not

work with the standard versions
of these programming machines this cable is only for the PRO versions . The standard version of the cable can be found
here
.

Autel – APB101- EEPROM Adaptor for IM608 Autel Key Programmers

Alliancelocksmith — Thu, 23 May 2024 23:02:55 +0000

Replacement APB101 EEPROM Adaptor for the
IM608

Autel Key Programmer Machines

Autel – OBDII Cable for Older DIY Tools

Alliancelocksmith — Thu, 23 May 2024 18:34:15 +0000

OBDII Cable for Older DIY Tools

OBDII Replacement Cable for DIY Tools

Compatible with Older AutoLINK Tools

Compatible with: AL301, AL319, AL419, AL519, AL619, AL439,
AL539
, AL539b, AL609

Tools Sold Separately

1-Year Manufacturer Warranty from Autel

Autel – TESKIT – Diagnostic Adapter Cables for Tesla S / X Models Work – Works with MaxiSYS Ultra / MS909 / MS919 Tablet

Alliancelocksmith — Thu, 23 May 2024 18:32:55 +0000

The
Autel TESTKIT
enables Autel Tablet to Activate Factory Mode and Perform System Diagnostics to Tesla Models S and X vehicles.
Compatible with: Autel
MaxiSYS Ultra
,
MaxiSYS MS909
,
MaxiSYS MS919
.
Includes:

1x Cable LAN001

1x Cable CAN001

1x Cable CAN002

Cable functions:
LAN001:
– Connects to Tesla port X861 (located behind the instrument cluster) to activate factory mode (instrument cluster must be disassembled)
– Connects to Tesla port X863 (located below the central control screen) for diagnostics of post-2015/Sept vehicles.
– Connects to Tesla port X863 (located to the left of the instrument cluster) for diagnostics pre-2015/Sept vehicles.
CAN001:
– Connects to Tesla port X437 (located below the central control screen) for diagnostics of post-2015/Sept vehicles.
CAN002:
– Connects to Tesla port X437 (located below the central control screen) for diagnostics of pre-2015/Sept vehicles.

Autel – USB Diagnostic Tool Cable For MaxiSys MS908S / MS906CV / MaxiIM IM608 / MaxiCOM MK908P

Alliancelocksmith — Thu, 23 May 2024 18:31:08 +0000

This is a replacement diagnostic tool cable for
MaxiSys MS908S
/
MS906CV
/
MaxiIM IM608
/
MaxiCOM MK908P
.

Autel – Cummins8 Adapter Cable for Autel Diagnostic Machines – Cummins Engines

Alliancelocksmith — Wed, 22 May 2024 18:59:18 +0000

This is a
Cummins 8-pin adapter
comp. with Cummins engines on off-highway vehicles. Used with Autel Diagnostic Machines.