Built-in database, support key missing teeth inquiry

Lightweight, small size, easy to work with

Equipped with two spindle belts, decoder, and cutter

Interpretation and cutting can be completed at one time

Supports plain milling key, face milling key, Allen key(F021), Stiletto key, and Cylinders key

Supports network remote upgrade, no need to return to factory

Includes: High-Security Automotive Clamp and BONUS: HU66 Clamp for VW, Audi, and Porsche

More Information Below:

Power

120 W

Dimensions

255(W)*360(H)*340(D)mm

Weight

24KG

Resolution

XY: 0.005mm Z: 0.0015mm

Spindle Revolution

11000+rpm

Operating Temperature

0-40℃

Humidity

10-90%

Instructions:
1. On/o
ff

To turn the machine on
First
turn on the machine (Red big button),
then
tablet (small button on the left top of the machine)
To turn the machine off
First
turn off the tablet (small button on the left top of the machine),
then
turn off the machine (Red big button)
Please kindly note that our machine can not work without the connection of the power plug. Do not open the wifi until prompted to do so.
How to Calibrate your machine:

Three situations in which you will need to do calibrate the machine:

When you receive the machine for the first time.

When you change the key clamp, decoder, and cutter.

When the machine cannot cut a key correctly.

High-Security Key Cutting:

Standard Key Cutting:

How to Cut HU66 Car Key:
3. Cutting Speed and Key Location Mode
There are four speeds for your choice: Steel, Nkl-silver, Brass, High Speed. Steel is the lowest while high speed is the fastest. Which speed should be selected mainly depends on key blank material. The hard the key is, the slow speed should be.
Usually, we will select Nkl-silver speed for most of the car keys
. Please kindly to be noted this. Besides, attached is how to select a local model when decoding and cutting for your reference. We classify it according to the key type. Please read very carefully and understand it
4. DO Cleaning often after finishing the key cutting.
5. If you did not turn on/off correctly, there may caused a Bluetooth disconnect. if happened, please reconnect the Bluetooth shown as attached video
OR
PDF”
E9 Bluetooth common phenomenon
instruction”

Operation Videos On Youtube

How to Cut Toyota Car Key TOY43:

How to Cut Honda Car Key HON66:

How to Copy a Dimple Key on SEC-E9:
How to Copy a Ford Tibbe Key:
How to Copy a Single Side Standard-Key:

How to Copy a Tubular Key:
9. How to cut a new key when the original key is lost
How to Replace Motherboard:
How To Update Firmware:

How to Cut #06 Dimple Keyway:

More informational videos on the SEC-E9

Kukai warrants non-wear parts for a period of one year from the date of purchase by the original owner. The warranty covers internal parts of the machine like the motor, motherboards, etc. The warranty does not cover tablets, displays, screens, cutters, decoders, key clamps, or accessories. External parts and accessories are not covered by warranty.

Purchase the SEC-E9 Automatic Key Cutting Machine (Generation IV Android Tablet Version)

and get a single-sided key clamp

SEC-E9 Automatic Key Cutting Machine – (Generation IV )

Single-Sided Key Clamp Jaw

SEC-E9 Automatic Key Cutting Machine – (Generation IV Android Tablet Version)

Built-in database, support key missing teeth inquiry

Lightweight, small size, easy to work with

Equipped with two spindle belts, decoder, and cutter

Interpretation and cutting can be completed at one time

Support plain milling key, face milling key, Allen key(F021), Stiletto keys, and Cylinder keys

Support network remote upgrade, no need to return to factory

Repair the wear in keys to recover the original precision

Can be mounted in vans or trucks using an optional kit

Includes: High-Security Automotive Clamp and BONUS: HU66 Clamp for VW, Audi, and Porsche and a
 single-sided key clamp is included

Single-Sided Key Clamp Jaw

Type:

Single-Sided Jaw / Clamp for Residential Keys

Tip Width (
Ρ)
:

N/A

Dimensions:

N/A

Material:

High-quality aluminum alloy

Grade:

Universal Grade

Applicable Machines:

SEC-E9 (will not work with PRO)

Part Number:

SN-CP-JJ-03

HOW TO UPDATE:

HOW TO CALIBRATE:

Kukai warrants non-wear parts for a period of one year from the date of purchase by the original owner. The warranty covers internal parts of the machine like the motor, motherboards, etc. The warranty does not cover tablets, displays, screens, cutters, decoders, key clamps, or accessories. External parts and accessories are not covered by warranty

How to Cut #06 Dimple Keyway
Video Below

KUKAI – SEC-E9 PRO – (Generation V) New 2020 Version

SmartBox Mini Key Programmers

KUKAI SEC-E9 PRO Specifications:
The latest in Automatic Key Cutting technology.

Capable of single-sided keys, double-sided keys, tubular keys, and laser keys can be copied, photographing available ( May require optional jaws)

Connected to an online database, support key missing teeth inquiries

Lightweight, small size, easy to work with

Equipped with two spindle belts, decoder, and cutter

Interpretation and cutting can be completed at one time

More informational videos on the SEC-E9

Android
Android 6.0 and above

iOS
iOS 12.0 and above

SmartBox Mini Key Programmers Specifications:
Portable version of the SmartBox. It does all the things your regular SmartBox does with the exception of battery testing, frequency testing, chip reading, and cloning. If you are a previous SmartBox customer you can use your previous subscription for pairing up to 2 SmartBox Mini’s. Expand your programming capability to your mobile employees.
Includes:

Smart Box mini

Samsung Galaxy 13 – SmartPhone

Micro USB Cable

USB wall charger

Case

Capable of single-sided keys, double-sided keys, tubular keys, and laser keys can be copied, photographing available ( May require optional jaws)

Connected to an online database, support key missing teeth inquiries

Lightweight, small size, easy to work with

Equipped with two spindle belts, decoder, and cutter

Interpretation and cutting can be completed at one time

IMPORTANT NOTES: Clamps, Jaws from the older SEC-E9 are not compatible with the PRO

You can have a MAXIMUM of 5 Users signed in at a time

WATCH THE DEMO VIDEO HERE
More informational videos on the SEC-E9

Android
Android 6.0 and above

iOS
iOS 12.0 and above

Download Phone Software HERE
Please Note:
you can have a maximum of 5 users sign in on the app at one time.
Specifications

Power

120 W

Dimensions

255(W)*360(H)*340(D)mm

Weight

24KG

Resolution

XY: 0.005mm Z: 0.0015mm

Spindle Revolution

11000+rpm

Operating Temperature

0-40℃

Humidity

10-90%

Includes

(1) High-Security Automotive Key Jaw

(2) Key Blocks

(1) 1.5 MM Cutter

(1) 2.0 MM Cutter

(2) 45 Degree Decoder

(1) T Wrench

(1) Stopper

(2) M5 bolt for cutter and decoder

(1) Calibrating key blank

(1) Power Supply

(1) USB Cable

(1) Bluetooth Antenna

(2) Spindle belt

(1) Key Blank List

(1) Brush

Kukai warrants non-wear parts for a period of one year from the date of purchase by the original owner. The warranty covers internal parts of the machine like the motor, motherboards, etc. The warranty does not cover tablets, displays, screens, cutters, decoders, key clamps, or accessories. External parts and accessories are not covered by warranty
Optional Accessories (sold separately)

Single Standard Key Jaw

Tubular Key Jaw

FO21 / Jaguar Tibbe Style Jaw

Power Inverter

Mounting Fit for Truck or Van

Dimple Key Decoder

Dimple Key Cutter

Capable of single-sided keys, double-sided keys, tubular keys, and laser keys can be copied, photographing available ( May require optional jaws)

Connected to an online database, support key missing teeth inquiries

Lightweight, small size, easy to work with

Equipped with two spindle belts, decoder, and cutter

Interpretation and cutting can be completed at one time

IMPORTANT NOTES: Clamps, Jaws from the older SEC-E9 are not compatible with the PRO

You can have a MAXIMUM of 5 Users signed in at a time

WATCH THE DEMO VIDEO HERE
More informational videos on the SEC-E9

Android
Android 6.0 and above

iOS
iOS 12.0 and above

Download Phone Software HERE
Please Note:
you can have a maximum of 5 users sign in on the app at one time.
Specifications

Power

120 W

Dimensions

255(W)*360(H)*340(D)mm

Weight

24KG

Resolution

XY: 0.005mm Z: 0.0015mm

Spindle Revolution

11000+rpm

Operating Temperature

0-40℃

Humidity

10-90%

Includes

(1) High-Security Automotive Key Jaw

(2) Key Blocks

(1) 1.5 MM Cutter

(1) 2.0 MM Cutter

(2) 45 Degree Decoder

(1) T Wrench

(1) Stopper

(2) M5 bolt for cutter and decoder

(1) Calibrating key blank

(1) Power Supply

(1) USB Cable

(1) Bluetooth Antenna

(2) Spindle belt

(1) Key Blank List

(1) Brush

Kukai warrants non-wear parts for a period of one year from the date of purchase by the original owner. The warranty covers internal parts of the machine like the motor, motherboards, etc. The warranty does not cover tablets, displays, screens, cutters, decoders, key clamps, or accessories. External parts and accessories are not covered by warranty
Optional Accessories (sold separately)

Single Standard Key Jaw

Tubular Key Jaw

FO21 / Jaguar Tibbe Style Jaw

Power Inverter

Mounting Fit for Truck or Van

Dimple Key Decoder

Dimple Key Cutter

w/ 1 Year FREE Updates

The perfect solution for your key cutting and programming needs!

The
AutoProPAD BASIC
programming machine from XTool is an OBD2 vehicle key/remote programmer. It is ideal for new locksmiths providing security services for their customers for most vehicle makes worldwide. It is the perfect complement or even replacement to other more expensive or less capable machines.

The
SEC-E9 Automatic Key Cutting Machine

(Generation IV Android Tablet Version) is a great key cutting solution for any locksmith. Lightweight, small size, easy to work with and can become fully portable for mobile jobs with the use of the
DC Power Inverter
.
Supports plain milling key, face milling key, Allen key(F021), Stiletto key, and Cylinders key and includes two clamps. High-Security Automotive Clamp and BONUS: HU66 Clamp for VW, Audi, and Porsche.

SEC-E9 Automatic Key Cutting Machine Features:

Built-in database, support key missing teeth inquiry

Lightweight, small size, easy to work with

Equipped with two spindle belts, decoder, and cutter

Interpretation and cutting can be completed at one time

Supports plain milling key, face milling key, Allen key(F021), Stiletto key, and Cylinders key

Supports network remote upgrade, no need to return to factory

Includes: High-Security Automotive Clamp and BONUS: HU66 Clamp for VW, Audi, and Porsche

Power

120 W

Dimensions

255(W)*360(H)*340(D)mm

Weight

24KG

Resolution

XY: 0.005mm Z: 0.0015mm

Spindle Revolution

11000+rpm

Operating Temperature

0-40℃

Humidity

10-90%

More informational videos on the SEC-E9

Kukai warrants non-wear parts for a period of one year from the date of purchase by the original owner. The warranty covers internal parts of the machine like the motor, motherboards, etc. The warranty does not cover tablets, displays, screens, cutters, decoders, key clamps, or accessories. External parts and accessories are not covered by warranty.

AutoProPAD BASIC Key Programmer Features:

1 Year FREE Updates

Transponder & Remote Programming: Including Acura, Audi, Fiat, Ford, GM, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Lamborghini, Land Rover, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Porsche, Saab, Scion, Subaru, Toyota, and Volkswagen. See the AutoProPAD Application Guide more details

Unlimited Usage: No tokens to worry about. It will work forever.

Easy, FREE Updates for a Year: The AutoProPAD BASIC updates directly via the Internet using built-in Wi-Fi. Updates are being added regularly and frequently. When your first year is up, just purchase an inexpensive subscription for updates to keep getting the latest software for the newest vehicles.

Automotive Diagnostic Functions: reading & clearing fault codes. Also includes a plethora of othe diagnostic capabilities (fully functioning OBD2 diagnostic tool for auto shops).

Large Touchscreen Interface: Using the large 7″ capacitive touch screen, paging through the options is fast and easy.

Superior Support: Manufacturer is able to remotely control and diagnose your device using TeamViewer for any needed assistance or updates. Technical manuals, circuit diagrams, common trouble codes, etc. are available for viewing on the AutoProPAD BASIC, making external support less necessary. On-the-vehicle support is provided by Americans, located in Southern California (Pacific time zone). The ability to take screenshots and videos of your screen are built into the tablet.

Easy, Free Updates: Updating is simple and updates are frequent.

It includes the same programming and diagnostics as the AutoProPAD LITE but in a budget-minded package. The BASIC is just the tablet, cable and power cord. It has the same software capability as the LITE without the extra hardware and accessories.

More Information on the AutoProPAD BASIC Key Programmer

Purchase the SEC-E9 Automatic Key Cutting Machine – Generation IV Android Tablet Version and get the NEW T-Ninja Pro & a Chrysler Security Bypass Cable!

Automatically cut keys with the SEC-E9 key cutter and automatically program them with the Brand New T-Ninja Pro Key Programmer.

Includes:

SEC-E9 Automatic Key Cutting Machine – Android Tablet Version
T-Ninja Pro Automotive Key Programmer
2017+ Chrysler Bypass Cable for Programming New Model Chrysler Dodge Jeep

More Information Below:

SEC-E9 Automatic Key Cutting Machine – Generation IV Android Tablet Version

Built-in database, support key missing teeth inquiry

Lightweight, small size, easy to work with

Equipped with two spindle belts, decoder, and cutter

Interpretation and cutting can be completed at one time

Support plain milling key, face milling key, Allen key(F021), Stiletto keys, and Cylinder keys

Support network remote upgrade, no need to return to factory

Repair the wear in keys to recover the original precision

Can be mounted in vans or trucks using an optional kit

Includes: High-Security Automotive Clamp and BONUS: HU66 Clamp for VW, Audi, and Porsche

THE T-NINJA Pro Key Programming Tool

The T-Ninja Pro is an automotive key programmer tool developed by TOPDON Technology. As an upgrade over the T-Ninja 1000, the T-Ninja Pro boasts a variety of functions including 
Number of Keys, PIN Reading, Key Learning, Remote Control Learning, Delete Keys, and All Keys Lost.
With its real-time guided operation, immense online database, robust hardware, and intuitive software, you now have an effective and easy-to-use key programming machine for automotive locksmiths and technicians alike.

Running on Android 11.0, the product features a quad-core A17 processor, an 8-inch color display, and 32GB of storage (128GB expendable storage supported), presenting 
more stable performance over
 the T-Ninja 1000.

Does NOT require internet or server connection to program keys

Supports most vehicles in North America, some Japanese brands and growing

Practical money-making functions: Read Pin Code, All Keys Lost, Add and Erase Keys and more

Step-by-step guidance through a series of functions.

Read Pin Code for most vehicles

Online Technical Assistance Center with a constantly updated database

Cost-effective; low price to meet the economic crisis and pay for itself in just one use

Regular updates for supported vehicles and future vehicles

Expandable Memory Storage

Reads & Clears Fault Codes

8 Maintenance Services

Support wireless and wired dual connectivity

All by OBD, no soldering, no EEPROM

Instructions for SEC-E9 Key Cutting Machine:

1. On/o
ff

To turn the machine on
First
turn on the machine (Red big button),
then
tablet (small button on the left top of the machine)
To turn the machine off
First
turn off the tablet (small button on the left top of the machine),
then
turn off the machine (Red big button)
Please kindly note that our machine can not work without the connection of the power plug. Do not open the Wi-Fi until prompted to do so.

How to Calibrate your machine:

Three situations in which you will need to do calibrate the machine:

When you receive the machine for the first time.

When you change the key clamp, decoder, and cutter.

When the machine cannot cut a key correctly.

High-Security Key Cutting:

Standard Key Cutting:

How to Cut HU66 Car Key:

3. Cutting Speed and Key Location Mode
There are four speeds for your choice: Steel, Nkl-silver, Brass, High Speed. Steel is the lowest while high speed is the fastest. Which speed should be selected mainly depends on key blank material. The hard the key is, the slow speed should be.
Usually, we will select Nkl-silver speed for most of the car keys
. Please kindly to be noted this. Besides, attached is how to select a local model when decoding and cutting for your reference. We classify it according to the key type. Please read very carefully and understand it

4. DO Cleaning often after finishing the key cutting.

5. If you did not turn on/off correctly, there may caused a Bluetooth disconnect. if happened, please reconnect the Bluetooth shown as attached video
OR
PDF”
E9 Bluetooth common phenomenon
instruction”

Operation Videos On Youtube

How to Cut Toyota Car Key TOY43:

How to Cut Honda Car Key HON66:

How to Copy a Dimple Key on SEC-E9:

How to Copy a Ford Tibbe Key:

How to Copy a Single Side Standard-Key:

How to Copy a Tubular Key:

9. How to cut a new key when the original key is lost

How to Replace Motherboard:

How To Update Firmware:

How to Cut #06 Dimple Keyway:

More informational videos on the SEC-E9

Kukai warrants non-wear parts for a period of one year from the date of purchase by the original owner. The warranty covers internal parts of the machine like the motor, motherboards, etc. The warranty does not cover tablets, displays, screens, cutters, decoders, key clamps, or accessories. External parts and accessories are not covered by warranty.

The SEC-E9 PRO
is the latest in Automatic Key Cutting technology. No Longer tablet-based…Works with your smartphone through Bluetooth-compatible phone app both Android and IOS compatible. Faster updates and communication with the database

The TOPDON T-Ninja Pro
is an automotive key programmer tool developed by TOPDON Technology. As an upgrade over the T-Ninja 1000, the T-Ninja Pro boasts a variety of functions including Number of Keys, PIN Reading, Key Learning, Remote Control Learning, Delete Keys, and All Keys Lost.

With its real-time guided operation, immense online database, robust hardware, and intuitive software, you now have an effective and easy-to-use key programming machine for automotive locksmiths and technicians alike.

Features of both machines below:

The SEC-E9 PRO (Generation V) Features:

Capable of single-sided keys, double-sided keys, tubular keys, and laser keys can be copied, photographing available ( May require optional jaws)

Connected to an online database, support key missing teeth inquiries

Lightweight, small size, easy to work with

Equipped with two spindle belts, decoder, and cutter

Interpretation and cutting can be completed at one time

IMPORTANT NOTE:
Clamps, Jaws from the older SEC-E9 are not compatible with the PRO. This is the 5th Generation of the SEC-E9 Series Machines.

The TOPDON Ninja Pro Features:

Does NOT require internet or server connection to program keys

Supports most vehicles in North America, some Japanese brands and growing

Practical money-making functions: Read Pin Code, All Keys Lost, Add and Erase Keys and more

Step-by-step guidance through a series of functions.

Read Pin Code for most vehicles

Online Technical Assistance Center with a constantly updated database

Cost-effective; low price to meet the economic crisis and pay for itself in just one use

Regular updates for supported vehicles and future vehicles

Expandable Memory Storage

Reads & Clears Fault Codes

8 Maintenance Services

Support wireless and wired dual connectivity

All by OBD, no soldering, no EEPROM