SalesFlip-Auteltools | Alliance Locksmith

Autel – APA103 – IM508 and IM608 EEPROM Clamp & Cable

Alliancelocksmith — Fri, 24 May 2024 05:38:59 +0000

8 Pin clamp connects to XP200 and XP400 for EEPROM chip read and write.

Autel – CAN FD Adapter for 2018-2020 Ford / GM Vehicles

Alliancelocksmith — Fri, 24 May 2024 04:33:19 +0000

Autel’s CAN FD Adapter
enables diagnostics of vehicles using the CAN FD (CAN Flexible Data-Rate) protocol used on newer GM and Ford vehicles.

Compatible with VCI or VCI/J2534 device included with Gen 1 Autel MaxiSys units: MX808, MS905, MS906, MS906BT, MS906TS, MS908, MS908P, MSELITE

Compatible with VCI/J2534 device included with the Gen 2 Autel MaxiSys units: MaxiADAS, MS908S, MS908SP,

IM508
,
IM608

One-year limited warranty

Works With The Following Models
GM
2020+ Corvette
2020+ Cadillac CT5
2020+ Cadillac CTS4
2021+ Large SUVs
Ford
2018+ Expedition/Navigator
2018+ EcoSport
2019+ Ranger
2020+ Transit
2019+ Transit Connect
2020+ Explorer/Aviator
2020+ Super Duty
2020+ Escape/Corsair
CAN FD Adapter not required for Autel Gen 3 units: Ultra, MS919 or MS909.

Autel – Toyota 8A Blade Connector Cable for Autel Key Programmer – (All Keys Lost) AKL Kit

Alliancelocksmith — Fri, 24 May 2024 04:29:57 +0000

The Toyota 8A Blade Connector Cable for Autel Key Programmer – (All Keys Lost) AKL Kit
Used for programming of Toyota / Lexus / Scion 8A bladed keys
No need to disassemble or replace immobilizer in All Keys Lost situation
Supports Toyota Camry, RAV4, Prius, Highlander, Tacoma, Sienna, Levinn 8A mechanical key (non-smart key) all keys lost programming
Note requires Autel Key Programmer
IM508

or
IM608

with

G-Box3
and
APB112
smart key simulator.

Autel – Nissan 16+32 OBD Gateway Adapter for B118 Chasis

Alliancelocksmith — Fri, 24 May 2024 03:24:55 +0000

The Autel 16+32 Gateway Adapter for Nissan

With 16+32 gateway adapter, it won’t need the password when adding new key for Nissan Sentra and the car with B18 chassis.
Note: If all keys lost, it will need password to program new key.

Autel – Mercedes Benz IR / Infrared Cable for IM508PRO / IM608PRO Autel Key Programmer

Alliancelocksmith — Thu, 23 May 2024 23:28:13 +0000

This is a replacement Mercedes Benz Infrared Cable for

IM508
PRO

(
involves using the
IM508
along with the
MaxiIM XP400 PRO

together)

and the

IM608 PRO

Autel Key Programming Machines. This Infrared Cable
will not

work with the standard versions
of these programming machines this cable is only for the PRO versions . The standard version of the cable can be found
here
.

Autel – MSOAK – Oscilloscope Accessory Kit – For the MSULTRA, MS919 and MP408

Alliancelocksmith — Thu, 23 May 2024 23:22:32 +0000

The
MSOAK
, compatible with the MaxiFlash VCMI included with the MSUltra and MS919, and the MP408 4-channel oscilloscope (sold separately), The current clamp measures a maximum current of 65A with a frequency up to 20 KHz. It works with jaws that open to allow clamping around an electrical conductor. And the 650A AC/DC current clamp measures a maximum current of 650A with a frequency up to 400 KHz. And the COP Probe can catch the ignition waveform of automobile engine easily.
Includes:

65A AC/DC Current Clamp

650A AC/DC Current Clamp

Coil on Plug Probe

HT Extension Lead (2pcs)

Battery Clip (2pcs)

Molded Carrying Case

1-Year Manufacturer’s Warranty

Downloads:

Spec Sheet

Probe User Guide

65A Current Clamp User Guide

650A Current Clamp User Guide

Autel – APB101- EEPROM Adaptor for IM608 Autel Key Programmers

Alliancelocksmith — Thu, 23 May 2024 23:02:55 +0000

Replacement APB101 EEPROM Adaptor for the
IM608

Autel Key Programmer Machines

Autel – MaxiVCI – V200 – Bluetooth – Vehicle Communication Interface

Alliancelocksmith — Thu, 23 May 2024 18:35:31 +0000

The
MaxiVCI V200
wireless diagnostic interface is a small interface box used to connect to a vehicle’s diagnostic connector (DLC) and connect wirelessly with the MaxiSYS Display Tablet, as well as standalone PC, as a vehicle communication interface (VCI) for vehicle data transmission. Thanks to the wireless BT technology, with which you are allowed to work freely around the vehicle.
The
MaxiVCI V200
can communicate with vehicles’ electronic control units (ECUs), guaranteeing performance and speed that redefine multi-brand diagnostics. The development of this interface has been focused on reducing the communication time, and ensuring the tool is practical to use. The MaxiSYS diagnostic platform combines the MaxiVCI V200 and the display tablet with technical information into a single program, ensuring quick and simple access to the vehicle to perform comprehensive diagnostics applications.
This MaxiVCI V200 Bluetooth interface is compatible with the following for MaxiSYS Series Tools:
MaxiSYS Elite
,
MaxiSYS Ultra
,
MaxiSYS MS906TS

Autel KM100
As well as: MS906TS, MK908, MS908, MS908S Pro, MS908 Pro and MK908P.
Features:

Wirelessly connects vehicle ECU to MaxiSYS tablets supporting Bluetooth

Features convenient wireless Bluetooth technology enabling tech to perform diagnostics outside of vehicle

Supports comprehensive diagnosis and reading of control modules

Ultra-fast OBDII-port communication within 75 feet

Updateable software via the Internet

Specifications

Communications

BLE + EDR
USB 2.0

Wireless Frequency

2.4 GHz

Input Voltage Range

6-36 VDC

Supply Current

150 mA @ 12 VDC

Operating Temperature

-10°C to 60°C (ambient)

Storage Temperature

-40°C to 80°C (ambient)

Built-in Battery

3.7V Lithium Battery

Light

White LED

Warranty

1-Year Manufacturer Limited Warranty

Content:

The MaxiVCI V200 device unit

User manual

CD with driver program and update agent.

General Notice:
The new, ultra-compact MaxiVCI V200 features the latest advances in wireless Bluetooth connectivity. It has been carefully designed and tested to comply with OBDII protocols. However, some vehicle models are not in full compliance with these protocols for various reasons. In addition, the computer control systems or sensors on any given vehicle may be malfunctioning.
While Autel’s testing and the experiences of the users have shown the unit to be safe and reliable, there is an inherent risk in using any product that may potentially affect the operation or drive-ability of your vehicle.
If you are concerned about the operation of your vehicle at any time while using the MaxiVCI V200
1. Pull off the roadway immediately or as soon as it is safe to do so.
2. Disconnect the device from the OBDII port.
3. Consult a licensed mechanic or automobile service center.

Downloads
Users Manual

Autel – OBDII Cable for Older DIY Tools

Alliancelocksmith — Thu, 23 May 2024 18:34:15 +0000

OBDII Cable for Older DIY Tools

OBDII Replacement Cable for DIY Tools

Compatible with Older AutoLINK Tools

Compatible with: AL301, AL319, AL419, AL519, AL619, AL439,
AL539
, AL539b, AL609

Tools Sold Separately

1-Year Manufacturer Warranty from Autel

Autel – TESKIT – Diagnostic Adapter Cables for Tesla S / X Models Work – Works with MaxiSYS Ultra / MS909 / MS919 Tablet

Alliancelocksmith — Thu, 23 May 2024 18:32:55 +0000

The
Autel TESTKIT
enables Autel Tablet to Activate Factory Mode and Perform System Diagnostics to Tesla Models S and X vehicles.
Compatible with: Autel
MaxiSYS Ultra
,
MaxiSYS MS909
,
MaxiSYS MS919
.
Includes:

1x Cable LAN001

1x Cable CAN001

1x Cable CAN002

Cable functions:
LAN001:
– Connects to Tesla port X861 (located behind the instrument cluster) to activate factory mode (instrument cluster must be disassembled)
– Connects to Tesla port X863 (located below the central control screen) for diagnostics of post-2015/Sept vehicles.
– Connects to Tesla port X863 (located to the left of the instrument cluster) for diagnostics pre-2015/Sept vehicles.
CAN001:
– Connects to Tesla port X437 (located below the central control screen) for diagnostics of post-2015/Sept vehicles.
CAN002:
– Connects to Tesla port X437 (located below the central control screen) for diagnostics of pre-2015/Sept vehicles.