P001 programmer uses dual coils with stronger signal, supporting a wider range of RFID. It is also required in recent model upgrades, as follow:

Ferrari 458 / F12 / F149;

Maserati mechanical key;

Fiat 500 / Viaggio / Palio / Siena / Boyue / Pailang / Ottimo, etc.

Iveco

Alfa Romeo

Volkswagen MQB

Toyota simulated cards

BMW

Porsche

Note:
OBDSTAR P001 Programmer only works with the
OBDSTAR X300 DP Plus
P001 Programmer Accessories
Accessory 1: C001 circuit board
C001 circuit board is compatible with old NO. 3 and 4 circuit boards, applying to EEPROM chip dismantling and reading, Tianjin FAW and VIZHI immobilizer coil initialization and other functions.
Accessory 2: C002 circuit board
The newly developed C002 circuit board is connected by W001, W002 or W003 without welding the chip.
Accessory 3: W001 data cable
W001 data cable can read or write data by linking the chip with a bonding wire
Accessory 4: W002 data cable
W002 data cable can read or write data by clamping the chip (SOP 8-pin) directly without welding EEPROM.
Accessory 5: W003 data cable
W003 data cable can read or write data by clamping positive pole and negative pole with red and black clips and contacting the data interface with yellow and blue probes.
Wiring Instruction
To better understand the connection among P001 programmer and its accessories, examples for W001 and W003 wiring instructions are as below. (During the actual operation process, there is a diagram of wiring inside tablet) Way 1. W001 Connecting Way 2. W003 Connecting
About Toyota simulated smart key
1. Why use a Toyota simulated smart key?
For the Toyota/Lexus 2007-2016 models, if all smart keys are lost, the instrument table must be removed and the ECU must be replaced. The cost is very high! This Toyota simulated smart key can generate a Toyota key with our devices in the case of all keys lost, so the ignition switch can be turned on, and then a new smart key can be added and programmed with our devices.
2. What are the advantages of the Toyota simulated smart key?
Save costs; Reusable.
3. How many types of Toyota simulated smart keys in total?
There are 4 types at present, and the 5th one is in development.
4. Which type of smart keys can be simulated?
Simulated key 1 applies to the vehicle with 94/D4 type of smart key; Simulated key 2 applies to the vehicle with 98 type of smart key; Simulated key 3 applies to the vehicle with 88/A8 type of smart key; Simulated key 4 applies to the vehicle with A9 type of smart key;

Includes 2 Years of FREE Updates

Full Immobilizer A Package Includes:

12V2A DC Charger

Main Cable

P001 Programmer Unit

C001 / C002 Circuit Boards

W001 Cable

W002 Cable

W003 Cable

IMMO Induction Coil

RT100

OBD II-16 Connector

HYUNDAI-10 Connector

KIA-20 Connector

HONDA-3 Connector

C Package available HERE

Note –
If you are using a hotspot, the device must connect to a 5G connection. If you are using an iPhone you must turn on Maximize Compatibility.

Hardware Advantages:

Built-in VCI box

8-inch touchscreen

Charge directly via OBD interface

Practical and high-end gift box

Industrial design with silicone case

Back bracket design:prop on the steering wheel or stand on the table

P001 programmer: EEPROM adapter + RFID adapter + Key Renew adapter

Add the clip of reading SOP 8PIN EEPROM

C001/C002 circuit board to read and write chip data with welding

IMMO induction coil to detect the key induction coil failure of the vehicle.

Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)

Software Advantages:

IMMO:

EEPROM

Renew Key

Key programming

Remote programming

Cluster Calibrate

Diagnosis

Downloads:

Volvo IMMO Upgrade

Ford IMMO Upgrade[V44.81]

Technical Specifications:

Operation system

Android 5.1.1

CPU

Exynos4418 Dual Core ARM Cortex A9 1.4GHz

Battery

3700mA, rechargeable polymer lithium battery

Extension memory card

32G Micro SD (TF) card supported

Memory capacity

1GB

Storage capacity

32GB

LCD

8.0 inch

LCD resolution

1280 x 800

Touch screen

Capacitive touch screen

Camera

5 mega rear-view camera

Wi-Fi

Supported

Working temperature

-10℃ ~ 55℃（14℉ ~ 131℉ ）

Storage temperature

-20℃ ~ 70℃（-4℉ ~ 158℉ ）

See Video Below

but it will also work for many other programming machines that use a similar process
AutoProPAD
and
AutoProPAD LITE
etc..
This cable has been designed to interface almost all automotive transponder programmers that have the capability of programming 2018+ Chrysler vehicles. It functions by intercepting your programmer’s CAN high and low signals and passing them through the attached probes. Depending on your plan of attack, you can tap the CAN wires directly in the STAR module, in the vehicle instrument cluster or at the wires which transport the information between the STAR module and the immobilizer. The OBD throughput will feed 12V back to your programmer to keep it charged if that feature is supported by your machine.
How to use:

Plug the main cable of your programmer of choice into the female OBD port of the adapter.

Locate the star module on the vehicle. Location varies from model to model.

Locate the plastic green strip with white cables plugged into it. Probe your red (CAN HI) into the green cable of the first plugin, and the black (CAN LO) into the yellow wire.

Use your programmer of choice to select by vehicle or system type and program like normal.

Includes 2 Cables

JCD-1

JCD-2

Toyota/Lexus smart key programming via OBD for all key lost; Supports “94/4D, 98/39(128 bit), 88/A8, A9” smart key offline programming via OBD

Chip generation;
Generate emergency key to start the car when the dedicated chip is not available

Chip copy;
Copy chip via collect and decode chip data (Cover wide range of vehicle models, faster)

Chip simulation and conversion
; Generate various kinds of chip in urgent situation

Chip decode
; Support code calculation for most 46 smart key and blade key (include 4D)

Detect Ignition Coil Fault and Chip Type
: Identify the working statue of the ignition coil and the type of key chip (Supports all key lost)

This program works with K518 to program Hyundai/Kia, BYD, Porsche, Cayman, and Boxster without PIN code

It also works with K518 to program Mitsubishi (46/47) all key lost via OBD

Dismantle-free

Doesn’t require networking

Localized computing

Specifications:

Type:

Emulator

Dimensions:

68mm X 37mm X 11mm

Battery:

CR2032

Standby Current:

3.5ua

Working Current:

≤4ma

Key programming and odometer adjustment via OBDII

Used with other diagnostic devices to read and clear fault codes

How to Use OBDSTAR FCA 12+8 Universal Adapter:

To locate and unplug the 12PIN and 8PIN connectors of the SGW module,

To connect the OBDSTAR FCA 12+8 universal adapter directly to the 12PIN and 8PIN connector on the car (two connectors connected to the SGW)

At this point, normal communication with the car can be achieved.

FCA (FIAT/CHRYSLER/ALFA ROMEO) can be used for the following cars:

2018 Chrysler 300

2018 Chrysler Pacifica

2018 Dodge Challenger

2018 Dodge Charger

2018 Dodge Durango

2018 Dodge Journey

2018 Dodge Ram

2018 Jeep Cherokee

2018 Jeep Grand Cherokee

2018 Jeep compass

2018 Jeep Wrangler

2018 Jeep Renegade

2018 Fiat

2018 Maserati and Ghibli Cable

Includes 2 Years of FREE Updates

Note: 
after the first year’s update expires, the second year’s update will become available once you update the physical device after 1st year expires

Full Immobilizer C Package Includes:

A Package available HERE

Note –
If you are using a hotspot, the device must connect to a 5G connection. If you are using an iPhone you must turn on Maximize Compatibility.

Hardware Advantages
:

Built-in VCI box

8-inch touchscreen

Charge directly via OBD interface

Practical and high-end gift box

Industrial design with silicone case

Back bracket design:prop on the steering wheel or stand on the table

P001 programmer: EEPROM adapter + RFID adapter + Key Renew adapter

Add the clip of reading SOP 8PIN EEPROM

C001/C002 circuit board to read and write chip data with welding

IMMO induction coil to detect the key induction coil failure of the vehicle.

Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)

Software Advantages:

IMMO:

EEPROM

Renew Key

Key programming

Remote programming

Downloads:

Volvo IMMO Upgrade

Ford IMMO Upgrade[V44.81]

TECHNICAL PARAMETER ● Operation system: Android 5.1.1 ● CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz ● Battery: 3700mA, rechargeable polymer lithium battery ● Extension memory card: 32G Micro SD (TF) card supported ● Memory capacity:1GB ● Storage capacity: 32GB ● LCD: 8.0 inch ● LCD resolution: 1280*800 ● Touch screen: Capacitive touch screen ● Camera: 5 mega rear view camera ● Wi-Fi: supported ● Working temperature: -10℃ ~ 55℃（14℉ ~ 131℉ ） ● Storage temperature: -20℃ ~ 70℃（-4℉ ~ 158℉ ） ● Weight: about 1.0 Kg ● Dimension: 254mm*174*mm*35mm Hardware & Software

See Video Below

“Programming Prox Keys for 2021 GMC Yukon”

Features:
Supports 46, 4D Data Collection
Supports 46 Transponder Password Calculation, Support models:
1. Porsche(2005-2010) 46 Pincode decryption
2. HYUNDAI/KIA 46 Pincode decryption, etc.

Supports Toyota/Lexus 4D (94/D4, 98) Smart Key Simulation

Supports Toyota/Lexus H (88/A8, A9, 39) Smart Key Simulation

Hardware Advantages:

Built-in VCI box

5-inch touchscreen

Charge directly via OBD interface

P001 programmer: EEPROM adapter + RFID adapter + Key Renew adapter

IMMO induction coil to detect the key induction coil failure of the vehicle

1-Year from registration date Warranty through the Manufacturer

Packing List:

Main Unit

Main Cable

12V2A DC Charger

KIA-20

OBD II-16 Connector

HONDA-3

HYUNDAI-10

P001 Programmer Unit

C001 / C002 Circuit Board

W001

Configuration List / Certificate / Quick Start Guide Fold

Downloads:

Volvo IMMO Upgrade

Ford IMMO Upgrade[V44.81]

Kawasaki Motorcycle IMMO Upgrade[V40.10]