Test Equipment | Alliance Locksmith

Jonard Tools – Accessory Kit for Cable Testers & Toners+

Alliancelocksmith — Thu, 23 May 2024 16:54:03 +0000

Designed for use with our Cable Testers & Toners+, this accessory kit includes:

(2) BNC to F Connector Adapters

50 Ohm BNC Terminator

BNC Cable Jumper

F Connector Jumper

RJ45 Cable Jumper

Belt Clip

Specifications

Weight

0.180 lb (81.65 g)

UPC #

811490016767

Downloads:
Spec Sheet

Jonard Tools – 8 Replacement Cable Identifiers

Alliancelocksmith — Thu, 23 May 2024 16:54:03 +0000

The Jonard Tools CMI-SET8 is the numbered and color-coded replacement set of cable identifiers for the CM-8 and CM-17 Cable Mapper and Toner Kits. These replacement cable identifiers are color-coded and easily tag up to eight cables simultaneously to prevent confusion while identifying. This cable identifier set includes 8 color-coded cable identifiers.

The 8 colors are:

#1 White, #2 Red, #3 Black, #4 Blue, #5 Green, #6 Yellow, #7 Purple, #8 Brown

Specifications

Includes

8 cable identifiers

UPC #

811490013858

Downloads:
Spec Sheet

Jonard Tools – Cable Mapper & Toner 8 Way

Alliancelocksmith — Thu, 23 May 2024 16:54:02 +0000

Designed for finding and identifying multiple COAX cables in main cable boxes, this cable mapper and toner is the perfect tool for use on cables for CATV, network installations, satellite installations, audio-video equipment, CCTV, and security & alarm installations. This 8-way cable mapper and toner kit features the following:

Eight numbered and color-coded cable identifiers (#1 White, #2 Red, #3 Black, #4 Blue, #5 Green, #6 Yellow, #7 Purple, #8 Brown)

Built-in tone generator easily identifies opens and shorts

Auto power off after 30 minutes in “Tone” mode

Tests for opens and shorts

Auto power off 12 seconds after pass/fail results

Maximum cable length for testing is 4,000 feet

Maximum DC cable resistance is 100 Ohms

Live voltage detection

Low battery warning light indicator

The kit includes the following:

Cable Mapper and Toner

Rugged Nylon Case

(2) Alligator Clip Sets

Instruction Sheet

CMI-SET8
8 Replacement Cable Identifiers

Specifications

Indicator

LED Lights & Tone

Maximum Cable Length

4000 feet

Dimensions

2 1/4″ x 5 1/4″ x 3/4″ (57.15 mm x 133.35 mm x 19.05 mm)

Weight

0.66 lb (298.732 g)

UPC #

811490012578

Downloads:
Spec Sheet

Jonard Tools – RJ45 Adapters

Alliancelocksmith — Thu, 23 May 2024 16:54:02 +0000

The CMI-RJ45 adapters (Pack of 9) are used with our CM-8 and CM-17 Cable Mapper and Toner Kits. This pack of 9 RJ45 adapters include 8 male-end RJ45 adapters and 1 female-end RJ45 adapter.
Specifications

Includes

8 male-end RJ45 adapters and 1 female-end RJ45 adapter

Dimensions

2.75 in x 0.57 in x 0.54 in (6.99 cm x 1.45 cm x 1.37 cm)

UPC #

811490016279

Downloads:
Spec Sheet

Jonard Tools – Telephone Butt Set with ABN – Analog

Alliancelocksmith — Thu, 23 May 2024 16:54:01 +0000

Designed to facilitate the installation, service, and maintenance of analog telephone lines, this telephone butt set has all the essential functions for testing telephone lines such as detecting dial tone, making and receiving calls, and tone and pulse modes. This telephone test set also features the following:

Dial, ring, talk, mute, or redial using this telephone line tester

Sends signals via dial tone (DTMF) or dial pulse

Angled Bed-of-Nails (ABN) Clips clamp connections securely

Includes telephone line tester, RJ11 test cord, and an extra fuse

Waterproof housing protects the unit from inclimate weather

RJ11 switchbox can test telephone lines directly by plugging them in

Battery free! No need for batteries as the unit operates using the ABN hook up or is powered by the telephone line

Specifications

Functions

Dial, Ring, Talk, Mute, Redial

Standards

GB/T15279-2002

UPC #

810053350010

Downloads:
Spec Sheet

Jonard Tools – Modular Cable Tester for RJ45 – RJ12 – RJ11 Cables

Alliancelocksmith — Thu, 23 May 2024 16:54:01 +0000

Designed to test the continuity of RJ45, RJ12, and RJ11 connectorized cables, this cable tester checks and troubleshoots pin connections in network and telecom cables. This modular cable tester features the following:

Tests for opens, shorts, and miswiring of RJ45, RJ12, and RJ11 terminated cables

Full LED indication lights on both main and remote unit

Automatically starts testing when switched on

Can slow down testing procedure using “S” switch to better see each test

Includes nylon carrying case and (1) 9V battery

Specifications

Connector Type

RJ45, RJ12, RJ11

Indicator Light Type

LED

Weight

0.51 lb (231.086 g)

UPC #

811490016316

Downloads:
Spec Sheet

Jonard Tools – Cable Tester & Toner+ w/ ABN

Alliancelocksmith — Thu, 23 May 2024 16:54:01 +0000

Designed for testing the continuity of cables and generating tones for identifying cables with ABN clips, this cable tester and toner is perfect for use on RJ45, BNC, and F connectorized coaxial, and other non-connectorized cables. This cable tester and toner feature the following:

TET-700BC
– Cable Tester & Toner+ with ABN:

Comes with ABN (Angled Bed of Nails) clips for grabbing onto 66 blocks securely

Piercing pin goes through insulation to reach the conductor without damaging insulation

Remote terminator can be used to test network cables with ease

Provides tone via RJ45 and BNC connectors or test clips

Provides talk power to a telephone for testing

Two different musical tones to choose from

Works with our
TEP-200
Tone Tracing Probe+ to identify cables

TET-6
– Accessory Kit for
TET-700BC

(2) BNC to F Connector Adapters

50 Ohm BNC Terminator

BNC Cable Jumper

F Connector Jumper

RJ45 Cable Jumper

Belt Clip

Specifications

Application

Wire Toning and Testing

Connectors

ABN Test Clips, RJ45, BNC, F

Standards

Battery Type

(1) 9V included

Cable Lengths

27.0″ (68.6 cm)

UPC #

811490011533

Downloads:
Spec Sheet

Jonard Tools – TEP-100 – Tone Tracing Probe

Alliancelocksmith — Thu, 23 May 2024 16:53:38 +0000

Designed to trace wire paths via tone detection, the Jonard Tools TEP-100 tone tracing probe is the perfect tool for identifying cables in common wiring systems. This tone tracing probe features the following:

Plastic probe tip prevents accidental shorts

Adjustable volume knob to work silently or to hear tone more easily

Works with many other manufacturers’ analog tone generators

Includes (1) 9V battery required for operation

Specifications

Application

Wire Tracing

Standards

CE Standards

Battery Type

(1) 9V included

Overall Length

8″ (20.32 cm)

Dimensions

8.25 in x 1.86 in x 1.3 in (20.96 cm x 4.71 cm x 3.3 cm)

Weight

0.21 lb (95.34 g)

UPC #

811490018310

Downloads:
Spec Sheet

Jonard Tools – Pocket Continuity Tester & Toner

Alliancelocksmith — Thu, 23 May 2024 16:53:38 +0000

Designed to identify cables in an MDU and detect troublesome short circuits, this pocket continuity tester and toner is perfect for testing cables up to 5,000 ft (1,500 m) on the go. This tester features the following:

Loud tone identifies line carrying signal

LED light indicates splitters, DC shorts, and other self-grounding devices in cable

Manual ON/OFF switch preserves battery life

Right angle male push-on connector is ideal for working in confined areas

Female push-on connector is perfect for speed toning

Accurate up to 5,000 feet (1,500 m)

Connect the toner without emitting a tone under discretion

Includes (1) AAA 1.5V battery and (1) pocket clip

Specifications

Indicator

LED Light and Speaker

Handle Color

Red

Length

6(16.2052cm)

Weight

0.09 lb (40.86 g)

UPC #

810053350782

Downloads:
Spec Sheet

Jonard Tools – Cable Tester Tone & Probe Kit+ w/ ABN

Alliancelocksmith — Thu, 23 May 2024 16:53:37 +0000

Designed to identify, trace, and test the continuity of BNC & F connectorized COAX cables, network cables using RJ45 connectors, and telephone lines using 6P2C/4P2C plugs. This multi-function cable tester tone and probe kit is the perfect kit for any Voice Data Video (VDV) professional. This kit features the following:

TET-200
– Tone Tracing Probe+:

Plastic probe tip prevents accidental shorts

LED light provides a visual indication of signal strength

Able to check the polarity of many 6P2C/4P2C telephone jacks

Adjustable volume knob and headphone jack assist in tracing wires

Works with many other manufacturers’ analog tone generators

Includes (1) 9V battery required for operation

TET-700BC
– Cable Tester & Toner+ w/ ABN:

Remote terminator can be used to test network cables with ease

Provides tone via RJ45 and BNC connectors or test clips

Provides talk power to a telephone for testing

Two different musical tones to choose from

Works with our
TEP-200
Tone Tracing Probe+ or others to identify cables

Includes
TET-6
Accessory Kit and (1) 9V battery required for operation

Specifications

Application

Wire Toning & Tracing

Connectors

(2) ABN (Angled Bed of Nails) clips, (1) RJ45, (1) BNC, (1) F Connector

Max Distance

0.62 mi (1000 m)

Standards

CE Standards

Battery Type

(2) 9V included

UPC #

810053350065

Downloads:
Spec Sheet