Using the AVDI in conjunction with the Abrites diagnostic software you can perform a full range of diagnostics for all the supported brands of vehicles such as Audi, Volkswagen, Seat, Skoda, Bentley, Lamborghini, Alfa Romeo, Lancia, Fiat, Chrysler, Dodge, Jeep, Renault, Dacia, BMW, Mini, Nissan, Infiniti, Toyota, Lexus, Scion, Ford, Mazda, Jaguar, Land Rover, Volvo, Opel, Vauxhall, Chevrolet, Mitsubishi, Hyundai, KIA, Suzuki, DAF, Subaru, Bombardier Recriational Products, Daihatsu, Ducati and others.

AVDI is a required part of the operation of the Abrites Vehicle Diagnostic Software and it is essential in order to use most Abrites products. Thanks to the AVDI you can perform basic diagnostics such as reading and clearing of diagnostic trouble codes, live values and actuator testing as well as all special functions developed by our company such as key programming, module adaptation, cluster calibration and others. AVDI is a true professional choice used by service and repair shops worldwide as well as locksmiths and even OEM representatives in order to complete diagnostic tasks at a original manufacturer level or higher.

Note:

Support Plan Service (SPS+) is sold separately and available

HERE

SKU:
ABRITES-AVDI-01

Weight:
2.0000

Manufacture:
Bulgaria

Manufacturer:
ABRITES

Products By Make:
Audi, BMW, Chrysler, Dodge, Ford, Hyundai, Jeep, Kia, Lexus, Lincoln, Maserati, Mazda, Mercedes, Mitsubishi, Porsche, Scion, Smart, Subaru, Toyota, Volkswagen, Volvo

Having an AVDI in your toolset elevates a professional from competing with other aftermarket service shops, locksmiths or diagnosticians to competing with the original manufacturer repair stations.

The AVDI has been in development for the past 15 years and some of its main features are:
MAIN FEATURES

Compatible with all diagnostic software produced by our company

One year free updates of all applications from the basic diagnostic suite (AMS is required after this period read more here .

SPS customer support is provided using the ABRITES own ticketing system (sold seperately)

More information about the support plan
here

SAE J2534 PASSTHRU compliant driver available for our interfaces

Compatible with many 3rd party diagnostic software

VCI emulator which can allow AVDI to emulate different interface units (like K-line interface, ELM327 interface, ..). Emulation mode, allowing the usage of many additional 3- rd party software – Webasto TT , Evinrude Diagnostics , Suzuki / Yamaha Marine Diagnostics and many others.

Compatibility with VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS

Compatibility with Fiat EXAMINER

Compatibility with Jaguar Land Rover Symptom Driven Diagnostics (JLR SDD)

Supporting external communication link with transponder programmer and IC programmer

Compatibility with Toyota/Lexus/Scion Techstream

Compatibility with Honda/Acura HDS

Compatibility with Volvo VIDA

Compatibility with DAS/Xentry – Star Diagnosis

Compatibility with Nissan Consult III+

Compatibility with Ford Scanner

Compatibility with BMW – DIS over K-line and CAN bus

Compatibility with BMW Rheingold ISTA-P

Compatibility with BMW – E-Sys, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus

Compatibility with Rover/Jaguar IDS

Compatibility with Subaru Select Monitor III

Compatibility with Bombardier diagnostic software

Compatibility with GM – Tech2Win, GDS2 and SPS diagnostic software

Compatibility with HYUNDAI GDS

Compatibility with KIA GDS

Now Available: Abrites Toolbox
–

100% FREE for all owners of an AVDI interface

Toolbox x32

Toolbox x64

The initial function of the ABRITES Toolbox is the Mercedes Security Access Calculator. It allows authorisation with Mercedes modules in order to unlock their complete functionality. If you have an authorisation seed (challenge bytes, sent from the module during the authorisation), then with our tool you can compute and send back the proper response to the ECU challenge. The possibilities that the calculator gives its potential users are endless, however the main ones can be found below:

Enable diagnostics for the latest Mercedes vehicles, that have a firewall – security restriction, that requires a Mercedes-Benz online account. Now, with our calculator you can unlock the firewall and work with the car without requiring a Mercedes-Benz online account.

Coding, actuator tests and certain routine controls, which also require security access can be unlocked using the tool.

Currently AVDI is distributed with the following diagnostic software:
SPECIAL FUNCTIONS

ABRITES Diagnostics for VAG – VW/Audi/Seat/Skoda

ABRITES Diagnostics for Porsche

ABRITES Diagnostics for Mercedes/Smart/Maybach

ABRITES Diagnostics for Opel/Vauxhall

ABRITES Diagnostics for Toyota/Lexus/Scion

ABRITES Diagnostics for Jaguar/Land Rover

ABRITES Diagnostics for BMW/Mini

ABRITES Diagnostics for Renault

ABRITES Diagnostics for Nissan

ABRITES Diagnostics for Peugeot/Citroen

ABRITES Diagnostics for Fiat/Alfa/Lancia

ABRITES Diagnostics for Ford/Mazda

ABRITES Diagnostics for Chrysler/Jeep/Dodge

ABRITES Diagnostics for DAF

ABRITES Diagnostics for Mitsubishi

ABRITES Diagnostics for Hyundai/Kia

ABRITES Diagnostics for Suzuki

ABRITES Diagnostics for Volvo

ABRITES Diagnostics for Daihatsu

ABRITES Diagnostics for Bikes/Snowmobiles/Water scooters

ABRITES Diagnostics for Subaru

J2534 PassThru driver that allows users to use 3rd party diagnostic software

Software for diagnostics for MAN and Scania is currently under development.
The interface will also be compatible with some of our other tools that are currently being developed like:

ABRITES Locksmith Tool

ABRITES Mileage Tool

ABRITES Tuning Tool

ABRITES SRS Tool

The Abrites Vehicle Diagnostics Interface (AVDI) is designed to comply with the following European Directives: 2004/108 / EC, 2006/95 / EC, 2011/65 / EU, 2012/19 / EU and meets the following safety norms: EN61010-1: 2010, EN61326-1: 2013.

It has been tested in the laboratories of TÜV Rheinland and has a GS certificate, which guarantees the high quality of the product. It evolves with every new car model to answer the increasing demands of the automotive business, which makes it the best choice for professionals and advanced enthusiasts.

We are happy to announce that we are adding even more FREE functionalities for all AVDI users with active AMS!

From now on, you can access a selection of ANxxx licenses (legacy functionalities) with the basic software for FREE. These solutions allow key programming and mileage calibration, as well as facilitate module replacement in VAG Immo III and III+ vehicles. This goes for the following special functions and licenses:

AN002 and AN003 –

reading CAN TP2.0 dashboards 2003-2008.
They are used for PIN/CS reading, mileage calibration on these dashboards in all VW/Seat/Skoda 2003-2008 (Immo III/III+ cars). This functionality is mainly used for preparing keys and mileage calibration.
AN004 –

Allows to manually change the Immo data for the modules above. This can be used to adapt a dashboard (immobilizer) for all VW/Seat/Skoda 2003-2008 (Immo III/III+ vehicles).
AN005 –

Used for new ECU adaptation in Immo III (excluding Immo III+) through adaptation by diagnostics on channel 50.
AN006 –

Allows reading EEPROMs on dashboards that use K-Line protocol. These are all 1998-2003 dashboards (VDO, Magneti Marelli, Motometer, on VW/Seat/Skoda), as well as Bosch RB4/RB8 dashboards (RB4 – 2001-2004 VW Golf/Audi A4, RB8 – Audi A4 2004-2008) . You can extract PIN/CS to program keys and calibrate mileage.
AN007 –

Used for reading the EDC15 (2000-2004) and ME7 (2000-2006) ECUs.
Also, extracting CS/PIN which can be used for key learning and module replacement (through adaptation by diagnostics on channel 50).
AN010 –

Allows reading the EEPROM of Airbags that use the K-Line protocol (1997-2004).
AN012 –

Allows odometer replacement on EDC16 (2004-2008).
AN014 –

Used for EDC17 PIN reading (excluding CS) – used for programming dealer keys (excluding preparing) for EDC17/MED17 2007-2010.
AN018/AN019 –

Allows reading EEPROM of EZS-Kessy on Audi 4F (A6 2003-2008, Q7 2005-2008). Used for extracting PIN/CS and key programming for these vehicles.
AN021 –

Used for reading the ME7 EEPROM via CAN protocol. These ECUs are used in vehicles such as the Audi TT 2003-2010. This functionality allows extracting the PIN/CS, which are used for key programming.
AN023 –

Used for Crafter Key programming in vehicles 2006-2012 equipped with EDC16.
AN024 –

Allows key programming for all Immo III/III+ vehicles, if PIN/CS is known (can be read with one of the other licenses) and a dealer key is present.
АN025 –

Allows reading the PIN/CS from EDC16/MED9/Simos PPD/Simos 7.x ECUs.
AN026 –

Used for dealer key preparation and programming (for all Immo III/III+ vehicles). It is used to find the 7th byte of the Immobilizer (if the Component Security bytes from the ECU can be read).
AN027 –

same as AN018/19, but extended to A6 2003-2010, Q7 2005-2014.
AN028/AN029 –

Allows UDS Dashboard Reading – VDO 2008-2015, JCI 2008-2012, Magneti Marelli 2006-2014. These are all used in VW/Seat/Skoda 2008-2013, as well as Audi A1/Q3. It is used to calibrate mileage and program keys (spare key and All Keys Lost).
What’s more, now the special functions for

JLR – JL003 and JL004 will be available to every AVDI user with active AMS.

This means that mileage calibration and key programming for Jaguar and Land Rover vehicles up to 2018 is now part of the basic AVDI software.
• Spare key programming
• ALL KEYS LOST key programming
• Remote control and keyless programming are part of the procedure, so no extra steps are required.
Supported models for key learning are equipped with the following KVM types:
• DPLA
• FK72
• HPLA
Supported models for mileage recalibration (including but not limited to):
Land Rover
• Evoque (L538) – LL and HL (2- and 4-door models)
• Range Rover Sport (L494)
• Range Rover (L405) (including long wheel base)
Jaguar
• F-Type Convertible and Coupe
• XF (X250)
• XJ (X351)
• XK (X150)
• XKR (X150)
The

FN012 special function now also becomes a part of the basic AVDI package.

This means that the following is available For FCA vehicles up to 2012 without the need for additional purchases:
• Key programming by OBDII
• Transponders/Keys preparation by dump of Immobiliser
• BCM – Configuration data read and update, PIN, component protection data
• BCM Read/Update ConfData by OBDII
Supported models for key programming:
• Fiat, Alfa, Lancia – Alfa 147, Mito; Fiat 500, Bravo, Grande punto, Croma, Doblo, Ducato, Fiorino, Idea, Palio, Panda, Stilo; Lancia Thesis, Delta.
Supported units:
• BCM Delphi (93C66) – NOTE: PIN Code is required!
• BCM Marelli (912DG128, 3K91D)
• BCM Marelli (9S12DG256, 1K79X)
• BCM Marelli (NEC 70F3237/70F3378,95160)
• BCM Marelli (NEC 70F3633,95320)
• BCM Siemens (9S12DG128)

ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!

Manufacturer: Lock Monkey Tools

Using our test platform can be completed on the bench, It’s both economical and convenient.

The wire is made of Japanese material, with built-in start button, indicator light, IMMO box indicator light, very user-friendly design, and most importantly, high quality and low price.

The power supply must be a 12-15V, or 2amps – 5amps

Manufacturer: KeylessFactory

Standard transponder key test

Infra-Red (IR) remote control test

Radio Frequency (RF) remote control test

Proximity/Smart key test

Proximity/Smart vehicle antenna transmitter test

Proximity/Smart key signal amplitude level indication

Radio Frequency (RF) remote control amplitude level indication

Transponder frequency indication

Oscilloscope waveform function (FAST and SLOW)

Proximity/Smart key system scan modes

Audible signal indication

Transponder vehicle antenna test

Specifications

Dimensions

90mm W x 170mm H x 38mm D

Weight

115g

Power

4x AAA NiMh batteries – rechargeable or alkaline

Battery Level

Indication on LCD screen

Battery Life

>5 hours (based on 750 mA/h NiMh)

Oscilloscope Mode

20 mS/Div (slow) 10 mS/Div (fast)

Scan Mode

2 seconds across screen

Current Consumption

90 mA Transponder

Test

125 kHz Amplitude Modulation
134.2 kHz Frequency Shift Keying (FSK)
Audible Tone for Data Signal

Display

Backlit Blue 128×64 LCD

Operating Temp. Range

32 to 122 Degrees F
0 to 50 Degrees C

Radio Frequency Test

150 to 999 Mhz

Resolution

0.1 Mhz

Infra Red Test

Universal Detection Receiver

Coil Antenna Test

Dual 125 kHz / 134.2 kHz Sensing

Proximity Signal Test

125 kHz to 134 kHz Range

Downloads
Spec Sheet
Operating Manual

User-friendly and portable

Powered by 3 x AA Batteries

Can be used on ALL Makes of vehicles

Test Radio Frequency Remote controls (RF)

Test Infra Red Remote Controls (IR)

Low-cost Time-saving tester

Simple to use

Low Battery Indication

Specifications

Dimensions

84mm (3.31″) W x 140mm (5.51″) H x 29mm (1.14″) D

Weight

130g (0.29lbs.) (Without batteries)

Accuracy

+- 5%

Receiver

RF (Radio Frequency) + IR (Infra Red)

Frequency Range

100 Mhz to 1000 Mhz

Display

Backlit LCD

Power

3x AA Batteries

Downloads

Spec Sheet
Operating Manual

Visual LED Signal Indication

Signal Mimic Sounder

Auto Power Off

Power Indicator

External Antenna Wand

Specifications


Dimensions

84mm (3.31) W x 140mm (5.51) H x 29mm (1.14) D

Weight

155g (0.34lbs.)

Power

3x AA Batteries – Alkaline or NiMh Rechargeable

Operating Current

10 mA

Power Consumption

45 mW

Frequency Range

125 kHz and 134 kHz

Operating Temp. Range

32 to 122 Degrees F
0 to 50 Degrees C

Downloads


Spec Sheet
Operating Manual

Instantly check power and ground circuits

Identify communication link protocols

Constantly monitor battery voltage with display

Specifications


Dimensions

85mm (3.35″) x 45mm (1.77″) x 25mm (0.98″)

Weight

60g (0.13lbs.)

Maximum Input Voltage

18 Volts

Minimum Input Voltage

6 Volts

Continuous Current Rating

1 Amp

Temperature Range

32 to 122 Degrees F
0 to 50 Degrees C

LEDs Activity

RED LED’s
(Pin 16) – automatically turn-on as soon as you plugg into DLC.
RED LED’s turn dim when:
• Low battery voltage – refer to Voltmeter and alarm will beep (below 12V)
• Wiring to DLC pin 16 is faulty
• Grounds circuits has resistance issues
GREEN LED’s
(Pins 4 and 5) – automatically turn-on as soon as you plugged into DLC.
BLUE LED’s
(Pins 2, 6, 7 and 10) – LEDs should flash when serial data voltage pulses are present in the data line. Blue LEDs is assigned on pins 2, 6, 7 and 10 to indicate communication with scan tool or interface and for communication protocol identification. LED will turn-on depending on your vehicle model. For some vehicle models, none or multiple blue LEDs will turn-on as soon as the OBD Port Tester is connected and you start the ignition.
The brightness of the LEDs will depend on the nature of the signal it’s showing. The OBD Port Tester can indentify immediately the protocol used.
YELLOW LEDs
(Pins 1, 3, 8, 9, 11, 12, and 13 should flash when used.
Downloads
Spec Sheet
Operating Manual

White LED lights to illuminate the inspection areas.

Small diameter allows it to be used in the tight spaces.

Wonderful for up-close visual inspections in confined areas, such as engine cylinders and small part inspections.

Powerful and perfect for inspecting most spark plug holes.

Super bright LED and high resolution provide crystal clear images.

Specifications

Optimal Viewing Distance

3/8’’ to 12’’ (0.95cm to 30cm)

Image Capture

320 x 240

Image Head

5.5mm (0.22’’)

Accuracy

1%

Operating Temperature

Main Unit: 0°C to 50°C (32°F to 122°F)
Cable: -10°C to 70°C (14°F to 158°F)

Storage Temperature

-20°C to 75°C (-4°F to 167°F)

Waterproof

Imager head and cable to 1m (3’)

Includes

1x MVIHC55 Module

1x MV105

White LED lights to illuminate the inspection areas.

Small diameter allows it to be used in the tight spaces.

Wonderful for up-close visual inspections in confined areas, such as engine cylinders and small part inspections.

Powerful and perfect for inspecting most spark plug holes.

Super bright LED and high resolution provide crystal clear images.

Specifications

Optimal Viewing Distance

1’’ to 14’’ (2.54cm to 35.56cm)

Image Capture

640×480

Image Head

8.5mm (0.33’’)

Operating Temperature

Main Unit: 0°C to 50°C (32°F to 122°F)
Cable: -10°C to 70°C (14°F to 158°F)

Storage Temperature

-20°C to 75°C (-4°F to 167°F)

Waterproof

Imager head and cable to 1m (3’)

Includes

1x MV108

1x Magnet

1x Hook

1x Mirror