tools-plus | Alliance Locksmith https://alliancelocksmith.com Locksmith & Security Systems | Miami & South Florida Fri, 24 May 2024 10:28:39 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://alliancelocksmith.com/wp-content/uploads/2021/04/cropped-alliance-ico-32x32.png tools-plus | Alliance Locksmith https://alliancelocksmith.com 32 32 Adjustable Drive-In Bolt – Polished Brass (Gold) https://alliancelocksmith.com/product/adjustable-drive-in-bolt-polished-brass-gold/ Fri, 24 May 2024 10:25:13 +0000 https://alliancelocksmith.com/?post_type=product&p=318245 Adjustable Drive In Bolt

Polished Brass (Gold)

]]> OBDStar – Replacement OBDII / OBD2 16 Pin Adapter for OBDStar Programming Machine https://alliancelocksmith.com/product/obdstar-replacement-obdii-obd2-16-pin-adapter-for-obdstar-programming-machine/ Fri, 24 May 2024 10:24:19 +0000 https://alliancelocksmith.com/?post_type=product&p=318193 This is the replacement OBDII adaptor by OBDstar. 16Pin Connector for OBDSTAR X300 DP/ X300 PRO4/ Odo Master/ P50

]]> AccuReader – GM – HU100 V4 – 10 Cut Ignition Removal Tool https://alliancelocksmith.com/product/accureader-gm-hu100-v4-10-cut-ignition-removal-tool/ Fri, 24 May 2024 10:21:47 +0000 https://alliancelocksmith.com/?post_type=product&p=318058 This tool was developed to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece*. It will remove the ignition in the “OFF” position with no damage, no drilling, and do it in less than 60 seconds for super-fast key origination’s or excellent for jammed ignitions that will no longer turn to the “ON” position.

Manufacturer: AccuReader

OE Part # GM HU100-IRT V4

Code Series: V0001-5718

Keyway Type: HIGH SECURITY

Keyway: HU100 / B119

Compatible with the following :
2017 – 2019 Chevrolet Cruze

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

]]> AccuReader – GM – HU100 V2 – 10 Cut Ignition Removal Tool https://alliancelocksmith.com/product/accureader-gm-hu100-v2-10-cut-ignition-removal-tool/ Fri, 24 May 2024 10:21:21 +0000 https://alliancelocksmith.com/?post_type=product&p=318035 This tool was developed to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece*. It will remove the ignition in the “OFF” position with no damage, no drilling, and do it in less than 60 seconds for super-fast key origination’s or excellent for jammed ignitions that will no longer turn to the “ON” position.

Manufacturer: AccuReader

Product Type: Pick & Decoder

OE Part #: GMHU100-IRTV2

Code Series: V0001-5718

Keyway Type: HIGH SECURITY

Keyway: HU100 / B119

Compatible with the following:

2014 – 2015 Chevrolet Silverado

2015 – 2015 Chevrolet Express VAN

2015 – 2015 Chevrolet Suburban

2015 – 2015 Chevrolet Tahoe

2014 – 2014 GMC Sierra

2015 – 2015 GMC Yukon

2015 – 2015 GMC Savana

2015 – 2015 Cadillac Escalade

Downloads:
Installation Guide
Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

]]> AccuReader – GM – HU100 V3 – 10 Cut Ignition Removal Tool https://alliancelocksmith.com/product/accureader-gm-hu100-v3-10-cut-ignition-removal-tool/ Fri, 24 May 2024 10:21:21 +0000 https://alliancelocksmith.com/?post_type=product&p=318036 This tool was developed to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece*. It will remove the ignition in the “OFF” position with no damage, no drilling, and do it in less than 60 seconds for super-fast key origination’s or excellent for jammed ignitions that will no longer turn to the “ON” position.

Manufacturer: AccuReader

Product Type: Pick & Decoder

OE Part #: GMHU100-IRTV3

Code Series: V0001-5718

Keyway Type: HIGH SECURITY

Keyway: HU100 / B119

Compatible with the following:

2015 – 2019 Chevrolet Colorado

2015 – 2019 GMC Canyon

Downloads:
Installation Guide

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

]]> AccuReader – GM – HU100 V1 – 10 Cut Ignition Removal Tool https://alliancelocksmith.com/product/accureader-gm-hu100-v1-10-cut-ignition-removal-tool/ Fri, 24 May 2024 10:21:20 +0000 https://alliancelocksmith.com/?post_type=product&p=318033 This tool was developed to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece*. It will remove the ignition in the “OFF” position with no damage, no drilling, and do it in less than 60 seconds for super-fast key origination’s or excellent for jammed ignitions that will no longer turn to the “ON” position.

Manufacturer: AccuReader

Product Type Pick & Decoder

OE Part : GMHU100

Code Series: Z0001 – Z6314

Keyway Type: HIGH SECURITY

Keyway: HU100 / B106 / B107 / B111

Compatible with the Following:
Yellow Side GM HU100 High Security:

2010 – 2012 Buick Allure

2010 – 2016 Buick LaCrosse

2011 – 2017 Buick Regal

2012 – 2017 Buick Verano

2010 – 2016 Chevrolet Camaro

2011 – 2012 Chevrolet Cruze

2010 – 2018 Chevrolet Equinox

2012 – 2017 Chevrolet Sonic

2016 – 2017 Chevrolet Spark

2010 – 2018 GMC Terrain

Blue Side GM Z-Keyway B106, B107, B111 models:

2008 – 2012 Buick Enclave

2008 – 2008 Chevrolet Traverse

2008 – 2012 GMC Acadia

2007 – 2010 Saturn Outlook

Downloads:
Installation Guide

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

]]> AccuReader – Honda / Acura Ignition Roll-Pin Removal Kit (IRPRK) https://alliancelocksmith.com/product/accureader-honda-acura-ignition-roll-pin-removal-kit-irprk/ Fri, 24 May 2024 10:20:55 +0000 https://alliancelocksmith.com/?post_type=product&p=318010 This LockTech Honda/Acura Ignition Roll-Pin Removal Kit
is designed to remove the roll pin without any damage to the ignition housing or the roll pin. After reinserting the ignition, simply reinsert the roll pin.
Detailed Instructions Below
Honda/Acura Ignition Roll-Pin Removal Kit Detailed Instructions:

Using the application chart (shown below), identify vehicle as having a Type 1 or Type 2 ignition housing.

If Type 2, use the included pointed center punch to back out the ignition headless bolts if necessary.

Using the supplied awl/ice pick, insert the tip into the end of the roll pin and gently move it side to side in all directions. Use ice pick to center the roll pin within the hole.

Using 2 of the 3 color-coded thumb screws, attach the fixture to the front of the ignition housing. Use spacing washers if necessary.

Insert the Black Tee thumb screw into the 1/4-20 tapped hole and snug it up against the ignition cylinder.

Insert a short tube into the brass thumb screw and LIGHTLY snug in place using the set screw. Insert the long tube through the outer tube so that the flared tip is on the threaded end of the screw.

Insert the brass thumb screw assembly into the threaded hole seating the flared tip over the top of the roll pin. Verify the flared end is seated over the roll pin by trying to move the tip side to side.

Thread the brass thumb screw 1-2 full rotations, then lightly tap the back end of the tube inwards to ensure it’s fully seated over the roll pin.

Continue turning the brass thumb screw assembly until it comes to a definite stop. DO NOT OVER-TIGHTEN.

Tighten the set screw ONE FULL ROTATION ONLY.

Loosen the Black 1/4-20 Tee thumb screw.

Unthread the brass thumb screw assembly with roll pin now attached.

If Type 1, be sure to use the ice pick to lift the steering lock tail piece during cylinder removal.

Honda/Acura Ignition Roll-Pin Removal Kit Tips:

After using the ice pick and before installing the fixture, lightly tap on the cylinder itself (not the cylinder housing) with a hammer in the direction of the roll pin to ensure the roll pin is out as far as possible.

Since the roll pin is tapered on the ends, you can use the ice pick placed in the center of the roll pin and tap LIGHTLY to slightly flare out the roll pin to allow for greater “bite”. Be sure to follow tip #1 afterwards to “push” the roll pin out as far as possible.

Honda/Acura Ignition Roll-Pin Removal Kit Application Guide:

Make

Model

Years

Type

HONDA

Accord

1998-2002

2

2003-2012

1

Civic

2001-2011

1

Crosstour

2010-2012

1

CR-V & CR-Z

2002-2014

1

Element

2003-2011

1

Fit

2007-2014

1

Insight

2000-2006

2

2010-2014

1

Odyssey

1999-2004

2

2005-2013

1

Pilot

2003-2004

2

2005-2015

1

Prelude

1997-2001

2

Ridgeline

2006-2014

1

S2000

2000-2009

2

ACURA

CL

1997-2003

2

MDX

2001-2006

2

2007-2013

1

RDX

2007-2012

1

RSX

2002-2006

1

TL

1999-2003

2

2004-2013

1

TSX

2004-2014

1

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

]]> Honda/ Acura Ignition Roll Pin Removal Refill 10-Pack/ IRPRF https://alliancelocksmith.com/product/honda-acura-ignition-roll-pin-removal-refill-10-pack-irprf/ Fri, 24 May 2024 10:20:55 +0000 https://alliancelocksmith.com/?post_type=product&p=318011 Manufacturer: AccuReader

Product Type: Pick & Decoder

OE Part #: IRPRF

This pack includes 10 clamp tube sets to be used with our Honda/Acura Ignition Roll Pin Removal Kit.

Compatible with the following:

1998 – 2012 Honda Accord

2001 – 2011 Honda Civic

2010 – 2012 Honda Crosstour

2002 – 2014 Honda CR-V

2011 – 2015 Honda CR-Z

2003 – 2011 Honda Element

2007 – 2014 Honda Fit

2000 – 2006 Honda Insight

2010 – 2014 Honda Insight

1999 – 2013 Honda Odyssey

2003 – 2015 Honda Pilot

1997 – 2001 Honda Prelude

2006 – 2014 Honda Ridgeline

2000 – 2009 Honda S2000.

1997 – 2003 Acura CL

2001 – 2013 Acura MDX

2007 – 2012 Acura RDX

2002 – 2006 Acura RSX

1999 – 2013 Acura TL

2004 – 2014 Acura TSX.

 

Please Note:
This a 3rd Party Tool, We offer NO Support and NO Warranty This tool is very fragile and can be damaged from misuse, an inexperienced user and wrongful or too much pressure applied If the tool malfunctions or breaks in the first 30 days of purchase, we will offer a discount on another AccuReader but we will not refund or replace the tool

]]> Power Supply Adapter w/ Battery for Xhorse Condor XC MINI (Xhorse) https://alliancelocksmith.com/product/power-supply-adapter-w-battery-for-xhorse-condor-xc-mini-xhorse/ Fri, 24 May 2024 10:15:34 +0000 https://alliancelocksmith.com/?post_type=product&p=317721 Xhorse Condor XC Mini Power Supply Adapter
No need to connect Car Inverter, battery as power supply, easy to carry. Supports household electricity and cigarette lighter to recharge or use as power supply. Supports recharging and working at same time, with high-capacity up to 76.5Wh, cutting more than 40 key blanks. Maximum working voltage no more than 30V, built-in multi-safety protection, to avoid short circuit problems. Includes
① Mainboard ② Cable of 6 & 7 ③ Battery charger & display module ④ Vehicle charging line ⑤ Adaptor 220V
Specification of rechargeable battery of Xhorse Condor XC-Mini

Standard voltage 25.9V

Limited charge voltage 29.4V

Rated Capacity 2500mAh

Power Ra 73.5Wh

]]> CN6 Clonable Transponder Chips for Cloning 48 Chips (CHIP-CN6) https://alliancelocksmith.com/product/cn6-clonable-transponder-chips-for-cloning-48-chips-chip-cn6/ Fri, 24 May 2024 10:13:54 +0000 https://alliancelocksmith.com/?post_type=product&p=317630 This is the CN6 Glass Cloning Chip used to clone Philips ID 48 Chips
More Information Below:
Compatible with the Following:

HU66AT6

]]>