500-foot range.

2 Channel Receiver & Transmitter.

Independently Programmable A & B Channel.

4, 8, 16 Second Delay or Alternate Action Trigger.

Will work with 12 through 30 V AC/DC.

Dry Contact Relay rated up to 30V @ 5 Amp Max.

Single Pushbutton Program-Erase (for security).

Screw Terminal Connections.

Up to 8 transmitters per one receiver.

68 billion codes.

Not backward compatible with any other 017TDC/018 Model!
Downloadable Content:
017TDC-4/018-4 Instructions

LED indicates operation

Transmitter size: 1.4”w x 2.9”h x 0.5”t

A-23 Battery Included

FCC/IC Approved

Must be used with the 017TDC-4 Controller
(Not backwards compatible with any other 017TDC/018 Model!)

LED transmission indicator only appears when buttons are pressed

Operates up to 500ft (150m)*

RF Anti-scan protection

FCC and IC Certified

315MHz (433.92MHz available)

Compatible with all 315MHz SECO-LARM receivers

Slimline design: 1-1/4″x2-3/16″x5/16″ (31.5x55x8 mm)

Replacement batteries available: X-930-096 (CR2032)

Patented design

*Actual range will vary greatly depending on the installation and operating environment

Type

2-Button RF Transmitter 68 billion codes

RF Frequency

315MHz

No. of Buttons

2

Channels

3

No. of Codes

68 Billion possible codes

Dimensions

1-1/4″x2-3/16″x5/16″ (31.5x55x8 mm)

4-Second momentary, toggle, latch, validity (receiver outputs for as long as the transmitter button is pressed), 1-second momentary

New! 2 Independently programmable channels

Compatible with all 315MHz ENFORCER transmitters

Use to control garage door opener, house lights, alarm control panel, or other devices via remote control

Two Form C dry relay contact (NO/NC/COM) outputs. Rated 10A@24VDC

Frequency 315MHz. 433MHz

This revolutionary receiver incorporates:

–1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.

–2.HIGHER SENSITIVITY for greater operating distances.

–3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.

–4.GREATER TUNING STABILITY so the receiver’s frequency remains unaffected by shock and vibration

2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared

2 Mode switches (one for each channel) for easy transmitter learning

Learns up to 30 transmitters (15 for each receiver channel)

Screw terminals for simple connection

Accepts ENFORCER fixed code or CODEBUMP transmitters

Operating voltage

11~24 VAC/VDC

Range

Up to 500′ (150m) with SECO-LARM transmitter. Range will vary

Output Mode

4-Second momentary, toggle, latch, validity, 1-second momentary

Current Draw

8mA@12VDC (standby), 30 mA per channel at 12 VDC (activated)

# of Stored Transmitter Codes

15 per channel, 30 per receiver

Extended Range Antenna Compatible

Yes (SK-91ERSD)

Compatible Transmitters

Fixed Code: 68 Billion codes, CODEBUMP: 18 Quintillion codes

Connectors

8 Quick-connect screw terminals (+, -, with NO/NC/COM for channel 1 and NO/NC/COM for channel 2)

Dimensions

3-1/8″ x 2-9/16″ x 1″ (80 x 65 x 25 mm)

Receiver Outputs

Two Form “C” dry relay contacts (N.O./N.C./COM); 10A@24VDC

Includes 9-foot cable

Double-stick mounting tape included

For use with these SECO-LARM RF receivers:

SK-910RBQ
– Single-channel receiver

SK-910RB2Q
– Two-channel receiver

SK-910R3Q
– Three-channel receiver

SK-910R4Q
– Four-channel receiver

Power Supply

5VDC ±10%

Current Consumption

<10.0mA Operating Temperature -4°~158°F (-20°~70°C) Sensitivity -108dBm Frequency 315MHz Bandwidth ±1.0MHz (-3dB)

LED indicates operation

Transmitter size: 1.4”w x 2.9”h x 0.5”t

A-23 Battery Included

FCC/IC Approved

Must be used with the 017TDC-4 Controller
(Not backwards compatible with any other 017TDC/018 Model!)

Compatible with all
ENFORCER
315MHz transmitters

Use to control garage door opener, house lights, alarm control panel, or other devices via remote control

10A @ 24VDC per channel, NO/NC/COM

Frequency 315MHz

This revolutionary receiver incorporates:

Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.

HIGHER SENSITIVITY for greater operating distances.

UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.

GREATER TUNING STABILITY so the receiver’s frequency remains unaffected by shock and vibration.

LED indicates RF reception, learn mode entered, transmitter learned, memory cleared

Mode switch for easy transmitter learning

Learns up to 15 transmitters

5 Output modes (programmable):
— 4-Second momentary,
— 1-Second momentary,
— Toggle,
— Validity: receiver outputs for as long as the transmitter button is pressed,
— Latch

Screw terminals for simple connection

Accepts
ENFORCER
fixed code or
CODEBUMP
transmitters

Type

WIRELESS – Single-Channel RF Receiver

Operating voltage

11~24 VAC/VDC

Range

Up to 500′ (150m) with SECO-LARM transmitter. Range will vary.

Relay Rating

Form C dry relay contact (NO/NC/COM); max 10 Amp at 24VDC per channel

Current Draw

8mA@12VDC (standby), 30mA/channel @12VDC (activated)

Extended Range Antenna Compatible

Yes (SK-91ERSD)

Connectors

5 Quick-connect screw terminals (+, -, with NO/NC/COM)

Dimensions

3-1/8″ x 2-9/16″ x 1″ (80 x 65 x 25 mm)

Download:

Datasheet

Manual

LED transmission indicator only appears when buttons are pressed

Operates up to 500ft (150m)*

RF Anti-scan protection

FCC and IC Certified

315MHz (433.92MHz available)

Compatible with all 315MHz SECO-LARM receivers

Slimline design: 1-1/4″x2-3/16″x5/16″ (31.5x55x8 mm)

CODEBUMP codehopping models also available

Replacement batteries available: X-930-096 (CR2032)

Patented design

Type

1-Button RF Transmitter with 68 billion codes

RF Frequency

315MHz

No. of Buttons

1

Channels

1

No. of Codes

68 Billion possible codes

Dimensions

1-1/4″x2-3/16″x5/16″ (31.5x55x8 mm)

Downloads:

Datasheet

Manual

Used to wirelessly unlock up to four separate Trilogy Networx series locking devices or locking devices wired to the RR-RECEIVER.

Intended as a portable pocket-size remote release

The Wireless Remote requires one battery (included) that features a service life of up to 12,000 openings (
CR2032 battery
) and 100 Feet range.

During normal operation, the locking device typically opens within 2 seconds of the button press

Return Policy: We accept returns on unopened products up to 30 days after the date of purchase. We do not accept opened/damaged/defective goods. To return affected items please contact Alarm Lock directly at 1-800-645-9440 or visit their support page
here
Click Here to Download RR-4BKEYFOB Programming Instructions
Click Here to Download Alarm Lock Brochure

No Electric Strikes or Power Supply Needed!

Upgrade your existing Trilogy cylindrical locks to remote release and create a more complete door entry system with the Networx Trilogy – Universal Wireless Remote Release Kit from Alarm Lock

Includes receiver and the desk-mounted button for your transmitter.

Also compatible with the
Alarm Lock 4-Button Key FOB

The convenience of one-touch unlocking of any Trilogy cylindrical lock without extensive wiring for power supplies and electric strikes.

This kit will retrofit to any Trilogy cylindrical lock manufactured since 1994

Return Policy: We accept returns on unopened products up to 30 days after the date of purchase. We do not accept opened/damaged/defective goods. To return affected items please contact Alarm Lock directly at 1-800-645-9440 or visit their support page
here