Extraordinary Diagnostics

Extensive vehicle coverage for U.S., Asian, and European vehicle makes

Read/Erase Codes, View/Graph Live Data

Preforms Active Tests and Special Functions

Smart AutoVIN technology for identifying vehicles easily

Supports DoIP and CAN FD protocols

Preforms Pre & Post Scan

Supports all OBDII protocols and 10 test modes

Advanced Service Functions

Supports 40+ maintenance service functions including:

Forced Diesel Particulate Filter (DPF) regeneration

Steering Angle Sensor (SAS) reset

Oil Light Service and battery registration

Resets service mileage and service intervals

EPB Reset and Preform Brake Bleed

Operating System:

 Android 11

Processor:

1.8 GHz Quad Core Processor

Memory:

4GB RAM / 64GB On-Board ROM Memory

Display:

8-inch LED capacitive touchscreen with 1280×800 resolution

Connectivity:

Wi-Fi (802.11 a/b/g/n) Mini USB 2.0 Micro SD Card

Battery:

7700mAh 3.7 V lithium-polymer battery

Camera:

Rear: 8 Megapixel

Operating Temperature:

0 to 50 °C (32 to 122 °F)

Storage Temperature:

-10 to 60 °C (14 to 140 °F)

Downloads:

Spec Sheet

Laser Key – 3D XTREME Key Cutting Machine – Series 4 (4th Generation)

Features

Cuts by code, including half-cuts

Decode/trace high security and standard keys, including those with internal cuts. Compensates for wear and decodes back to factory original cuts.

Fully automatic calibration

Includes cutting wheel for cutting standard keys and 2.5mm for laser cutting high security keys

Gives option for plunge cutting or contour cutting standard keys

4-sided J2 vise on left for cutting all kinds of standard keys. J1 vise on right for cutting high security keys. Mercedes and BMW adapters now built into jaw-top. New J3 vise in center of jaw for cutting VW keys without the need for an adapter!

Designed for mobile applications. Bolt-down kit available.

Tibbe jaw available

Tubular jaw available

No tools needed to interchange parts

Easily updated via the Internet

Native USB connectivity

Now Includes a 2-Year Warranty (parts & labor)

Only 45lbs

NOTICE: If you are going to be using the 3D Elite in your vehicle, please purchase a
Vehicle Bolt-Down Kit (Sold Separately)
with your machine. If you use this machine in a vehicle without the
Vehicle Bolt-Down Kit,

your warranty will not be honored.

What’s new with the Extreme version:

Now Includes Laptop & Genericode!

New, traditional cutting wheel for standard keys

New software much easier to use

New all-in-one jaw combines both 4-way standard and laser jaws into one

New, integrated brush wheel

New chip tray keeps your work areas clean

New J3 jaw eliminates need for VW adapter

New chip guard adds safety

Specifications:

Weight

45 lbs

Compatibility

High security and standard keys

Calibration

Fully automatic

Jaws

4-sided J2 vise for standard keys, J1 vise for high security keys, J3 vise for VW keys

Connectivity

Native USB

Warranty

2 years (parts & labor)

Desktop version Customer Keys database:

The Customer Key database allows you to use the desktop version of key machine software to save customers and keys.

This allows you to keep customers and keys stored in the software for later reference.

Please refer to instructions about backing up and restoring the Customer Database

Performing a software update should not affect the customer database but it is a good idea to back it up just in case.

JMA Move: A lightweight and compact travel mate

Innovative, attractive and highly ergonomic design that provides professionals with a comfortable workspace and easy-to-reach operating handles and mechanisms.

Light and easy to carry

The new MOVE mechanical key cutting machine for dimple keys, laser keys, and tubular keys offers a flexible, ergonomic, and highly precise professional solution.

Its easy of use and portability make it the perfect tool for those professionals always on the move.

Easy and Intuitive

One of the main new features is the easy and intuitive mechanism for adjusting the tracer. The direction of rotation is shown on the adjustment wheel.

The new clamps expand the possible key-cutting options by enabling tubular keys to be cut too, as well as dimple keys and laser keys.

Specifications:

Motor

120 VDC – 150 W

Cutter

F1, F8, F11

Tracer

P1, P8, P11

Clamps

Grip for security, sidewinder, tubular keys

Width

320 mm

Height

380 mm

Depth

370 mm

Weight

12 kg / 26.45 lbs

Speed

5,500 rpm

Useful run

X = 28 mm; Y = 58 mm; Z = 25 mm

Lighting

LED lighting

Transmission

Flat belt

Displacement

Linear bearings with rollers

Warranty

5- year manufacturer’s warranty

Downloads:

Brochure


NOTE:
For JMA tech support, please call
1(817)385-0515
or email
info@jmausa.com

KeyMaster G3
is the new generation intelligent scanner of OBDSTAR, which fully inherits the many advantages of OBDSTAR in automobile/commercial vehicle technology, such as wide coverage of car models and various functions, and comprehensively increases the programming functions of E-car, motorcycle, marine (jet-ski), etc. A good helper for automotive locksmith master.

Supported Vehicle Types:

Car

HD

E-Car

MOTO

Marine (jet-ski)

Software Functions:

Support Programming IMMO (Keys), Remote Test, R/W Transponder, Make Dealer Keys, Make Start Keys, Renew Key, IMMO OFF, R/W EEPROM/MCU, Unlock ECU, ECU Advanced, OBD II, etc.

Hardware Advantages:

Built-in CAN-FD, Fault Tolerant CAN, OBD16 Pinout Switch, DOIP, Remote Test, and RFID.

RK3568 Hexa-Core Processor, 4G+64G Capacity Storage, High-brightness Display, HDMI High-definition Interface, Dual-band 2.4/5GHZ WIFI, Bluetooth 5.0, STM32H723 High-Performance VCI Processor.

Advanced Functions (Note some advanced functions may require software or adapter purchases for functionality) :

Support MOTO key programming (no need pincode) function for HARLEY, TRIUMPH, DUCATI, KAWASAKI, HONDA, SUZUKI, YAMAHA, BRP, INDIAN, DAYANG, APRILIA, PIAGGIO, VESPA, DERBY, GIRELLA, GUZZI, PEUGEOT, ITAJET, and others.

Support Marine key programming function for BRP, KAWASAKI, YAMAHA, and others.

Support E-Car key programming function for LI, NETA, LEAPMOTOR, SERES, AITO, and others.

Support unlock ECU function for ALFAROMEO, FIAT, CHRYSLER, DODGE, JEEP, and others.

Support programming solutions for SMART 453 that have lost all keys and all functions have been disabled.

Support programming solutions that have lost all keys and all functions have been disabled for RENAULT CITY K-ZE, KWID, SANDERO, TRAFIC, TWINGO, LODGY, DUSTER PH3.

Support pincode reading function that have lost all keys (No risk, and will not turn your car into a brick) for Renault post-2015 ESPACE, KADJAR, KOLEOS, MEGAN, SCENIC, TALISMAN, and Samsung QM6SM6 models.

Paid software activation service for Cluster Calibration, ECU Flasher, Airbag Reset, Test Platform, and other functions are available.

Feature

KEY MASTER G3

KEY MASTER DP PLUS

Operation system

Android 11

Android 5.1.1

OTA

✓

×

Screen recording

✓

×

Wireless screen casting

✓

×

CPU

Dual-core Cortex-A72 + Quad-core Cortex-A53

Exynos4418 qual core ARM cortex A9

Storage capacity

4+64GB

1+32GB

LCD

8.0 inch fully laminated sunlight readable screen

8.0 inch

LCD resolution

1280*800

1280*800

Camera

Rear camera 800W pixels, auto-focus

Rear camera 500W pixels

Bluetooth

Bluetooth 5.0

×

External interfaces

RJ-45

×

External interfaces

HDMI✓

×

External interfaces

TYPE-A,TYPE-C

TYPE-A,TYPE-C

WiFi

Dual-band 2.4G/5GHZ

2.4G

VCI

STM32H723

STM32F407

VCI

CANFD built in✓

CANFD Adapter Required

VCI

DOIP built in✓

×

VCI

Fault Tolerant CAN built in✓

×

VCI

All other common protocol types

All other common protocol types

RFID

Built in✓

P001 Required

Remote Test

Built in✓

RT100 Required

Renault Converter

Built in✓

Renault Converter Required

Downloads:

User Manual

Key Master G3 Coverage

Kawasaki Motorcycle IMMO Upgrade[V40.10]

Kawasaki Marine IMMO Upgrade[V40.10]

Volvo IMMO Upgrade

Ford IMMO Upgrade[V44.81]

Function Display
Main Page

Function Display
IMMO

Function Display
Remote Test

Function Display
RFID

Function Display
ECU Advanced

Function Display
ECU Flasher

Manufacturer: Xhorse
PN:
XD8ABAGL

Compatible With The Following:

2022 – 2024 Toyota Sienna

2021 – 2024 Toyota Land Cruiser

2020 – 2024 Toyota Harrier

2022 – 2024 Toyota Venza

2022 – 2024 Toyota RAV4

2021 – 2024 Toyota Tundra

2021 – 2024 Toyota Yaris

2022 – 2024 Toyota BZ4X

2021 – 2024 Toyota Weiland

2022 – 2024 Lexus NX

2022 – 2024 Lexus LX 

2020 – 2024 Lexus All Models

2020 – 2024 Toyota All Models

This XHorse XCPF0GL 0.55mm probe
for
Condor XC-Mini Plus II
is used for snake groove key and certain dimple key learning

Manufacturer: Xhorse Size: 0.5mm

Xhorse 0.5mm Tracer Probe for
Xhorse Condor XC MINI Plus II

This is a 2.5mm XHorse Engraving Cutter
used with the
XHorse Condor XC Mini Plus II
and supports the key blank engraving function. 

Manufacturer: Xhorse

Tip Width: 2.5mm Engraving Cutter

Used with the XHorse Condor XC MINI Plus II

This is a 1.0mm XHorse Pointed Probe
 used with the
XHorse Condor XC Mini Plus II
.

Manufacturer: Xhorse

Tip Width: 1.0mm Pointed Probe

Used with the XHorse Condor XC MINI Plus II

Same Style, Smaller Size, Small Knife Style

Knife Style / 3-Button Universal Smart Key for VVDI Key Tool

3-Button Knife Type Remote

Buttons: Lock, Unlock, Trunk

Keyway: Blade NOT included

Battery:
CR2032
(not included)

This universal smart key will replace Honda, Buick, Ford, Cadillac, Nissan, Mitsubishi, and Chevrolet proximity keys and is compatible with
VVDI2
/
VVDI MINI Key Tool
/
Key Tool Plus
.

Built-in immobilizer transponder

Write different vehicle remote data

Support simulation of multiple immobilizer transponders, including

46/47/48/49/4A/MQB48/MQB49.

Generate and program prox key

Support a variety of car models

Wireless programming: Reprogrammable

This PCB Board only works exclusively with Mazda, it supports the Mazda smart key. It also supports regeneration and reuse. When using the XZ series, the remote database version needs to be updated to V308 or above. 

Manufacturer: Xhorse

Remote Database: V308 GL