Description
The
XTOOL AutoProPAD G2
and the
XTOOL – CANFD Adapter – AutoProPad – Program GM 2020-2023
are a perfect complement for each other. The AutoProPAD G2 is a powerful and versatile key programmer. Using the CANFD Adapter will allow you to Program keys for 2020 and newer GM vehicles. The adapter is easy to use and simply plugs into the OBD-II port of the vehicle.
This Bundle Includes the Following:
Xtool – AutoProPad G2 – Automotive Key Programmer
XTOOL – CANFD Adapter – AutoProPad – Program GM 2020-2023
Xtool – AutoProPad G2 – Automotive Key Programmer
America’s leading key and remote programmer is back, and better than ever! The
AutoProPAD G2
is one of the most technologically advanced members of the AutoProPAD family. They combine the very best of automotive key programming and diagnostic technologies, in a completely redesigned package. The AutoProPAD G2 is the machine of the future, and it’s here now!
NO TOKENS REQUIRED
View List of Compatible Vehicles Here
The AutoProPAD G2
comes with the same Quad-Core ARM Cortex-A17 1.8GHz Processor and memory as the G2 Turbo but with a slightly smaller battery and screen size. It also does not have an RJ45 (CAT6) ethernet port and only comes with OBD2-16 adapter. EEPROM cabailities are basic (SOIC8/DIP8, No Euro) and vehicle interface is only hardwired OBD. The G2 almost looks like a completely new machine compared to its predecessor and AutoProPad has made sure that the hardware is able to keep up with emerging security technologies.
Special Features
ABS Bleeding
Airbag Sensor Reset
EEPROM Adapter
TPMS Reset
Electric Parking Brake
DPF Regeneration
Gearbox Initialization
Air Suspension Calibration
Windows Initialization
Instrument Cluster
Gear Sensor Calibration
Seat Configuration
Headlight Calibration
Service/Maintenance light
Electronic Pump Activation
BMS Reset
Electronic Power Steering
Cam/Crank Sync
Throttle Relearn
Cylinder Contribution
Performance Tire Upgrade
Disable Transportation Mode
Fuel Injector Coding
ECM Performance Upgrade
Your AutoProPAD includes a free year of unlimited updates.
When your subscription ends, you can continue to use your unit like normal, but any new updates will not be available to download. Also, on-the-vehicle technical support is only available to users with an active subscription. Please note that when your subscription ends, you have 30 days to renew your subscription. If you fall outside of a subscription for more than 30 days, if you decide to renew again, you will be charged a $150 reactivation fee. At $600/year, or $50/month, it’s silly to not just keep your subscription active.
View List of Compatible Vehicles Here
Downloads:
Specs and Features
Feature Comparison Chart for AutoProPad models
See the Premiere and Compare video below
XTOOL – CANFD Adapter – AutoProPad – Program GM 2020-2023
The CAN-FD adapter supports 2020 and newer model year vehicles using the Controller Area Network Flexible Data-Rate protocol, and is an extension to the original CAN bus protocol that was specified in ISO 11898-1.
Data rate transmits up to 5 times faster than the original CAN data allowing more data to be sent between modules required on newer vehicles when diagnosing ECUs and programming new modules.
This adapter simply replaces the standard OBD2 Connector on the AutoProPAD main data cable. No other software or hardware is required, once installed the adapter can be used with existing software and can be interchanged with the standard OBD2 connector.
2021+ Buick Envision
2020+ Cadillac CT4/CT5
2022 Cadillac XT4/XT5/XT6
2020+ Cadillac Escalade
2020+ Chevy Corvette
2021+ Chevy Tahoe
2022 Chevy Silverado
2022 Chevy Suburban
2022 GMC Sierra
2021-2022/3 GMC Yukon
More Information Below:
Compatible with the following:
AutoProPAD Full
AutoProPAD G2
AutoProPAD G2 Turbo
