Description
New Yanhua Mini ACDP 2 Key Programming Master Basic Host
ACDP 1 vs ACDP 2:
ACDP 1:
Wireless connection only
ACDP 2:
Wireless and USB connection, connect ACDP host via Android, iOS and PC devices via USB without Bluetooth adapter.
Features:
No need to remove chip
No need for soldering
No need to cut the line
No need to lift the pin
Solder-free programming & Data safety
WiFi connection & Free connection
The Yanhua Mini ACDP2 host itself supports CPU read and write function only. You can pay for different modules, e.g FEM/BDC module, CAS module, read DME ISN module and a couple of other modules.
ACDP 2 Programmer Configuration List (ACDP Host):
(1pc) ACDP 2 Programmer
(1pc) Puncture Socket (With one more plastic part）
(1pc) BAV-KEY adapter
(1pc) P8P Cable
(1pc) 8P Cable
(1pc) 20P Cable
(1pc) 20P to 8P cable
(1pc) Android cable
(1pc) IOS cable
(1pc) USB cable
(1pc) OBD cable
(1pc) (1(4V Switch Power Supply
ACDP Gen 1 vs Gen 2 Comparison:
Feature
Gen 1
Gen 2
Connectivity
Bluetooth
Bluetooth + Wired USB
CAS Modules
CAS 1-4
CAS 1-4+ including latest models
Makes Supported
BMW, Land Rover, Porsche, VW
Added Jaguar, Volvo, Honda, Kia
Gearbox Functions
BMW 6HP/8HP programming
Added EGS ISN reset for BMW
ECU Programming
–
Added Fujitsu Honda & Kia ECUs
Cloning
–
Added DQ200/250/DL382 for VW/Audi
Diagnostics
Read codes and live data
Enhanced diagnostics features
Operating system requirements:
iOS (iPhone/iPad/Mac):
System Version: 9.0 or above
Device: iPhone 6 or newer
RAM: 2GB or more
Storage: 1.5GB or more
Download the app from the iOS App Store by searching for ‘ACDP’
Android (Huawei, Xiaomi, Oppo, Samsung, etc. with Qualcomm chipset):
System Version: 5.0 or above
RAM: 2GB or more
Storage: 1.5GB or more
Download and install the Android app
Windows PC (Windows 7 and 10):
System Version: Windows 7 or 10 (WinXP not supported)
RAM: 2GB or more
Storage: 1.5GB or more
Yanhua Mini ACDP Function:
EEPROM Programming:
Support 93/24/25/35/95 Series EEPROM in circuit programming (ICP) and on adapter board programming(OBP).
Support CAS1-CAS3+ IMMO key programming and mileage reset through OBD mode.
Support CAS3+/3++, CAS4/4+key programming and mileage reset by ICP. Data reading and writing without lifting the pin. No removing any components. Intelligent detection.
Support FEM/BDC IMMO key programming and mileage reset. Fully automatic mode matching. Safe, reliable and fast! Support FEM/BDC module restore, FEM/BDC backup and write anti-theft data at the same time.
Support key unlocking, key refresh function.
Repair (FRM) Footwell module data without coding.
Support BMW 8HP (F/G chassis) gearbox refresh. 6HP (F chassis) gearbox refresh and cloning.
Support CAS1-CAS4 data restore. It can modify vehicle frequency, VIN, ISN code, or replace CAS module by modifying EE data.
Support OBD restore CAS3/CAS3+/CAS3+ problem caused by downgrade
Read ISN codes of N20/N55/N13 by OBD or without openning the DME shell. Read ISN code of MSV70/MSV80/MSD80 without opening the DME shell. Read ISN code of other models (B38, etc.) by opening the shell.
Support instrument calibration of BMW full range.
Jaguar/Land Rover KVM module Programming:
Support Adding key and all-key-lost for new Jaguar and land rover with KVM module after year 2015.
Porsche BCM module Programming:
Support Adding key and all-key-lost for new Porsche after year 2010
Volkswagen MQB module Programming:
Support parts of VDO key programming/mileage adjustment of VW MQB platform via OBD, and Passat MMC(NEC D70F3525+95320) instrument adjustment after years 2015 by ICP mode.
Fujitsu CPU module Programming:
Support Fujitsu CPU MB91F (Honda Fit,KIA K3/K5,Sonata 9,etc.) Mileage adjustment.
Clear EGS ISN:
For connecting BMW 6HP/8HP gearbox
Functions includes as below:
EGS State
Clear ISN
Reset Adaptation
Backup Coding
Recover Coding
Volvo ECM Key Programming:
Adding Key & All Keys Lost from 2009-2018
VW/Audi Gearbox Clone Module:
Support VW, Audi DQ200 (0AM/0CM), DQ250(02E/0D9), DL382(0CK), DL501(0B5), VL381(0AW) models and etc.
