Description
ADR-8675-36-83-628
Designed for applications that require a life-safety exit device with concealed vertical rods for two-point locking.
Features:
Top latching mechanism utilizes a rotating top bolt which dead latches around the header strike, ensures interlocking between the door and the frame for high level of security
Adjustable steel rods protected in contoured covers
Available with top and bottom rod, or top rod only
Easy to install design for use in applications with single doors or pairs of doors
More Details Below
Features
Materials
Push bar made of extruded aluminum, cladded or anodized
Handing
Device is non-handed.
Push bar Length
Standard sizes: 36″ [914.4 mm]. Standard width bars can be field cut to the next smallest opening width.
Bar Height
Standard model adjusts from 30″ [762 mm] to 44″ [1117.6 mm].
Door Thickness
Suits 1-3/4″ [44.5 mm] standard, up to 2-1/4″ [57.2 mm]. Device requires modification when used with cylinder in doors over 1-3/4″ [44.5 mm]. Please contact factory for more details.
Door Height
Standard configuration suitable for doors up to 66″ [1,676.4 mm] above the selected bar height.
Stile Width
Minimum 2″ [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doors.
Stile Wall
Doors with stile walls other than 1/8″ [3.2 mm] require modification.
Projection
2-5/8″ [66.7 mm] when fully projected, 1-5/8″ [41.3 mm] when dogged.
Dogging
Standard dogging with hex key or optional cylinder dogging. Electric Dogging option has been discontinued. Motorized and Electric Latch Retraction options can replace Electric Dogging requirement, see Options & Accessories.
Fasteners
Standard machine screws
Cylinders
Accepts any standard 1″ [25.4 mm] length, 1-5/32″ [29.4 mm] diameter mortise cylinder with MS cam such as the 4036 Mortise Cylinder. Accommodates cylinder lengths from 1″ [25.4 mm] to 1-1/4″ [31.8 mm]. Available separately.
Downloads:
Spec Sheet
