Description
Baldwin Traditional Square Reserve Deadbolt
Patio Deadbolt Function
– Patio deadbolt operates by Thumbturn from one side only – NO KEYED CYLINDER. (One Sided – meant to be used on doors that do NOT have a hole drilled all the way through them)
Single Deadbolt Function
– Single cylinder deadbolt operates with a key on the exterior and a thumbturn on the interior (For use on exterior doors where additional security is needed, pair with a keyed entry for two points of locking)
Double Deadbolt Function
– Double cylinder deadbolt operates with a key on the exterior and interior (For use on exterior doors with glass panes or gates where additional security is needed)
Features:
Solid forged brass construction.
Features 1″ solid brass throw bolt latch with hardened steel roll pin for additional strength and security.
Features low profile cylinder projection.
2-1/8″ cross bore and 1″ edge bore for latch.
Accommodates door thickness 1-3/4″ to 2″. Up to 2-1/2″ thick door door with service part kit.
Baldwin 5-pin C-Keyway standard
Adjustable backset latch fits 2-3/8″ (60mm) or 2-3/4″ (70mm) pre-bored doors.
Functions available: Patio, single cylinder and double cylinder.
Limited Lifetime Mechanical Warranty and Limited 25 Year Finish Warranty
Specifications
Configuration
Deadbolt
Function
Patio, Single Cylinder, Double Cylinder
Cylinder
5-pin keying cylinder
Finish
260 Polished Chrome
Backset
Adjustable 2-3/8″ or 2-3/4″
Latch Faceplate
Drive-In, Round Corner, Square Corner
Diameter
2.34375 ”
Cross Bore
2-1/8″
Edge Bore
1″
Door Thickness
1.75″ in
Deadbolt Diameter
2.125″ in
Concealed Screws
No
BHMA Certification
Grade 1
Downloads
Patio Installation
Single Cylinder Installation
Double Cylinder Installation
Return Policy: We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact Baldwin directly at 800-566-1986 or visit their support page
here
.
O
nce you have the ticket contact UHS Hardware for the return.
