Description
Baldwin Tube Leverset with Contemporary Square Rose includes both sides of trim.
Passage Function:
Baldwin’s passage levers have no locking function and are free turning on both sides. These levers are perfect for a hallway or closet where no locking is necessary. Sometimes passage levers are used in conjunction with a deadbolt for an entrance or back door.
Privacy Function:
Baldwin’s privacy leversets are locked from the interior via a pin on the interior rosette. There is an emergency release hole on the exterior rosette. These privacy levers are perfect for a bathroom or bedroom where the ability to lock the door is desired but a keyed lock isn’t necessary.
Entrance Function:
Baldwin’s single cylinder leverset has a keyed cylinder on the exterior and a lever with thumbturn on the interior. Unlocking and locking the lever is done by either a key on the exterior or via the thumbturn on the interior. Pair this keyed leverset with a Baldwin deadbolt for a complete back door or entrance solution.
Features:
Solid forged brass construction built to last a lifetime.
Baldwin 5-pin C-Keyway standard for keyed entry.
Versatility and Easy Installation:
Adjustable Latch for both 2-3/8″ and 2-3/4″ backset
Guide Post for Easy Installation
Accommodates door thickness 1-3/8″ to 2″. Up to 2-1/2″ thick door with service part kit
(Part Number: 8BR0706)
.
2-1/8″ cross bore and 1″ edge bore for latch.
Tested to exceed ANSI/BHMA Grade 2 security.
Shown with Contemporary Square Rose, can be customized with other Reserve roses.
Features easy-to-install spring assisted chassis for optimal operational strength.
Limited Lifetime Mechanical Warranty and Limited 25 Year Finish Warranty.
Specifications:
Configuration
Lever
Function
Passage, Privacy, Entrance
Finish
260 – Polished Chrome
Handing
Non-Handed
Backset
Adjustable 2-3/8″ or 2-3/4″
Latch Faceplate
Drive-In, Round Corner, Square Corner
Cross Bore
2-1/8″
Edge Bore
1″
Door Thickness
1-3/4″ to 2″
Handle Length
4.25 in
Handle Projection
2.344
in
Trim Height
2.5625
in
Trim Width
2.5625 in
Concealed Screws
No
BHMA Certification
Grade 2
Downloads
Passage Installation
Privacy Installation
Entry Installation
Return Policy: We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact Baldwin directly at 800-566-1986 or visit their support page
here
.
O
nce you have the ticket contact UHS Hardware for the return.
