Description
The SDC Auto EntryControl
Low Energy Swing Door Operator offers true Plug N Play Access Control System Installation. It features an internal, 1.0 Amp+ Accessory/Lock Power Supply to allow for integration with electric latch retraction exit devices, electric strikes, and other electric locking system without adding an extra power supply. A time delay function is also built into the control system eliminating the need for supplemental relays or controls.
It provides hands-free, low-power point of entry door control to help meet all US and Canadian ADA requirements for door installations in retail storefronts, office buildings, campuses and healthcare facilities. The state-of-the-art microprocessor-based unit is self-tuning and self-learning while offering non-handed operation, full mechanical stops and a variety of interface options for sensors, push-plates, fire alarms and electrified locks.
Clear Aluminum Finish
Pull Arm included – Non Handed
36″ doors
Auto EntryControl’s non-pivot drive and combination of belt, gear and pulley requires less torque, requires less power, absorbs more abuse, and is quieter than other automatic door openers while complying with all US and Canadian ADA requirements. On-board diagnostics simplifies troubleshooting for ease of installation and all Auto EntryControl’s can be easily configured for surface mounted push/pull or overhead concealed applications.
Features:
ADA Compliant
Meets ANSI A156.19
Certified for use as fire door operators (3 hour rating)
Self-Tuning, Self-Learning
Minimum 5 seconds from close to open
Stays open for 5 seconds
Force: 15 lbs -6.8 kg
Push or Pull (In door, Out swing)
Activation: Knowing Act
Optional Safety Device
Power: 1A, 100W
Non-Handed
Extremely Quiet Operation
Application
Single Interior Doors
Header Size:
39″
Power Supply:
115 VAC (+6%, ‐10%) 60Hz
Motor:
24 VDC Permanent Magnet With Belt Driven Encoder
Header Dimensions:
Width: 4‐1/2”
Depth: 4‐7/8”
Length: 39” (for 36″ doors)
Fused Protection:
3.5A Fuse (“F1” located on I/O Board)
Motor Assembly Weight:
22 lbs. Per Operator Drive Assembly
Ambient Operating Temperature:
‐4° to 131° F
Ingress Protection:
IP23 (protection from spray water up to 60° from vertical)
Maximum Door Weight:
342 lbs.
24 VDC Accessories/Lock Power Supply:
24 VDC / 1A max
Adjustable Speeds & Timers Potentiometers:
Auto Opening Speed
Auto Closing Speed
Hold Open Time
Closing Speed w/ Power Off
External Selector Switch Functions:
Automatic
Hold Open
Manual (Off/Night)
Standard Control Outputs:
24 VDC Power Supply
Lock Relay
Door Status (Fully Open and Fully Closed)
Malfunction Alarm Signal
Standard Control Inputs:
Interior Activation
Exterior Activation
Emergency Shutdown
Fire Alarm Input
Stop Safety Device Input (Pull side presence sensor)
Downloads:
Data Sheet
Installation Manual
