Norton – 5740K3 – Universal Low Energy Door Operator – Push & Pull Side – Slide Track & Double Lever Arm – Aluminum

$2,841.25

The 5700 series operator comprises three components making it an easy solution for medium traffic doors that need basic operator functionality. While simple to install and use, this operator consists of a 1600 series door closer with a proven history of dependability. This unit installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton’s 1601 closer body. Quiet and dependable, the 5700 meets the requirements of the Americans with Disability Act (A.D.A.) and ANSI/BHMA A156.4. This Kit contains Push & Pull Arms, Power Cord, Receiver, (2) Push Buttons and (2) Transmitters.

Description

The 5700 series operator comprises three components making it an easy solution for medium traffic doors that need basic operator functionality. While simple to install and use, this operator consists of a 1600 series door closer with a proven history of dependability. This unit installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton’s 1601 closer body. Quiet and dependable, the 5700 meets the requirements of the Americans with Disability Act (A.D.A.) and ANSI/BHMA A156.4. This Kit contains Push & Pull Arms, Power Cord, Receiver, (2) Push Buttons and (2) Transmitters.
Features

2 Push Buttons, 2 Transmitters

Application versatility and ease of adjustment; push and pull side mounting units included

Operates as mechanical surface closer during close cycles, when door is opened manually or if power is turned off; quiet operation

Spring force provides the feel of a normal manual door closer; door can be opened manually if desired.

Unit Activation Options: wall switches, motion sensor, radio frequency device

End-User On/Off Switch

Hold Open options; 0-30 seconds (5 seconds minimum required for ADA and ANSI/BHMA A156.19)

Obstruction Detection: motor stops if door is obstructed during an opening; door closes under manual spring force (not to exceed 15lbs)

“Push and Close”; allows the operator to skip the hold open time when it is not necessary or required

Adjustable door sensitivity

Overload Safety Shut-Off – after two minutes of receiving a door activation signal, the inverter will time out and close the door; prevents motor/inverter damage

Motor Start Delay for Locking Hardware – 0-5 second delay to allow locking hardware to release first

Specifications

Construction

Heavy-Duty cast-aluminum body

Function

Hydraulic Electronic Door Operator

Interior or Exterior

Both

Handing

Non-Handed

Power Input

120 VAC, 60Hz

Power Supply

24 VDC (1.1A)

Finish

689 – Aluminum

Maximum Door Weight

250lbs

Door Width

30″ – 48″

Housing Depth

4-5/8″

Housing Height

5-1/4″

Housing Length

29″

Projection from Wall

4-5/8″

Mounting Style

Regular, Top Jamb, Slide Track, Surface Mount

Max. Door Opening

180 Degrees

ADA

Meets requirements for Americans with Disabilities Act (ADA)

Certifications

ANSI/BHMA A156.19; UL/cUL Listed

Warranty

2-Year Limited Warranty

Includes

2 Push Buttons
2 Transmitters
1 Receiver
1 Power Cord

Downloads

Installation Guide

Wiring Instructions