Description
DH-ASC1204C
The DH-ASC1204C Four-Door, One-Way Access Controller is a controlling device which compensates video surveillance and visual intercom. It has neat and modern design with strong functionality, suitable for commercial building, corporation property and intelligent community.
Features:
Includes vented enclosure and pre-wired power supply
Removable terminal blocks support ease of wiring
Scalable up to 64 four-door controllers managed by SmartPSS
Supports controlled lock down of all connected access doors
Easily integrate biometrics to secure sensitive locations
Enable anti-passback and multi-door interlock to control traffic in high security applications
Specifications:
System
Main Processor
32-bit ARM Cortex-M3
Memory
16 MB (32 MB external)
Input/Output Ports
Inputs:
Nine (9) Normally Open, Supervised Inputs, 0 VDC to 5 VDC nominal: Maximum Power for Relay Input, Four (4) Door Sensors, Four (4) Exit Buttons, One (1) Alarm
Outputs:
Five (5) Dry Relays: Four (4) Lock Relays Form C, 3 A at 24 VDC maximum¹, One (1) Alarm Relay, Switching Signal Type. 1 A at 24 VDC maximum
Readers
Four (4) Reader Inputs 11 VDC to 13 VDC, current limited. 300 mA, maximum per port
Capacity
Card Holders
100,000
Events
150,000
Functions
Unlock Modes
Card, Fingerprint, Password, Card + Password, Card or Password, Card + Fingerprint, Fingerprint + Password, and By Period
User Management
General, VIP, Guest, Patrol, Black List, Duress
Alarm Function
Door time-out Alarm, Intrusion Alarm, Duress Alarm, Tamper Alarm
Schedule Settings
Schedule: 128 Groups
Period: 128 Groups
Interface
Wiegand Reader Data
24 AWG, 5 conductor stranded cable without shield, 40.0 m (131.23 ft), maximum
RS485 Reader Data
24 AWG, 120 Ω Impedance, 3 conductor stranded cable without shield, 100.0 m (328.08 ft) maximum. Use a separate power supply to extend the RS485 reader data up to 1000.0 m (3280.84 ft), maximum
Network Compatibility
TCP/IP, RJ-45 (10/100 Mbps)
Operations
Power Supply
Power Cable Included
Primary Voltage Input
100 VAC to 240 VAC, 1.5 A, 47 Hz to 63 Hz
Secondary Voltage Input
9 VDC to 15 VDC, 500 mA
Battery Charging Circuit
13.8 VDC at 1 A. Use only a 12 VDC, 7000 mAh sealed rechargeable lead acid type battery (includes one 11-in. battery cable)³
RTC
Support
Dimensions
11.02 in. x 12.60 in. x 4.49 in.
Certifications
Safety
UL 60950-1 & CAN/CSA C22.2 No. 60950-1-07
EN 60950:2006+A2:2013
Electromagnetic
Compatibility (EMC)
FCC CFR 47 Part 15 subpart B. EN
Downloads:
Spec Sheet
User Manual
Quick Installation Guide
