Description
Peugeot / Citroen Full Pack
allows the user to perform changes to various coding parameters in the modules of PSA vehicles including 2021 models. This allows the user to both change current configuration parameters but also to perform retrofits in the vehicle and code them as though they were originally fitted to the car in question.
An AVDI interface with a valid AMS subscription is required for the purchase of the special function.
No Information Below:
PN009 – Engine control unit advanced diagnostic
PN009 is a special function dedicated to reading and updating the Configuration data, reading and updating the flash, making IMMO OFF, resetting service intervals, and changing the PIN codes of Engine Control Units of different ECUs in Peugeot/ Citroën vehicles.
PN017 – BSI, Instrument Cluster Data Manager
PN017 is a function dedicated to the Instrument cluster and BSI odometer data calibration in Peugeot/ Citroën. With this special function, you can read and calibrate the mileage stored in the BSI module and remove the synchronization with the instrument cluster (i.e. The modification is performed in the BSI exclusively and after a complete ignition cycle the mileage is not restored to the original value). In the cases where the sync removal does not apply, it can calibrate the mileage in the cluster exclusively. Supported models are all CAN and UDS protocol models which include almost all models produced after 2004. Support for Delphi UDS BSI 2016+ included.
PN018 – PIN Manager
PN018 is on the front line in the aftermarket solutions for key and remote control programming for the Peugeot/ Citroën vehicle range. Abrites diagnostics for Peugeot/ Citroën always manages to be one step ahead in terms of PIN code reading and key/ remote control programming in these vehicles making the PN018 an absolute leader in this field.
With this special function, you can read PIN codes from the BSI module. Supported models are all CAN and UDS protocol models which include almost all models produced after 2004.
Support for Delphi UDS BSI 2016+ included.
PN019 – Advanced Coding Configuration
PN019 – Advanced Coding Configuration allows the user to perform changes to various coding parameters in the modules of PSA vehicles including 2021 models. This allows the user to both change current configuration parameters but also to perform retrofits in the vehicle and code them as though they were originally fitted to the car in question.
N.B. Please note that you will require an
AVDI interface
with an
Active AMS
in order to use this special function. Absolutely no tokens required.
ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!
