Description
The CB030 cable
is intended for direct connection on bench with the engine control units from BOSCH types MD1, and MG1 in Mercedes-Benz vehicles and vans.
The CB030 has two identical connectors with different pinouts for MG and MD ECUs. One of the connectors is specially designed for the MD type of ECUs, and the other is for the MG type of ECUs. Exercise caution and make sure you connect the right type of connector to the ECU (MD or MG) to avoid ECU malfunction.
Functionalities:
The cable is useful for diagnostic purposes on the bench, and of course, for FLASH/DFLASH programming using
EP003
functionality of Abrites ECU Programming Tool.
Using the
MN032
FBS4 Manager license, you can virginize, personalize and extract personalization data from MD1, and MG1 ECUs via the CB030 cable.
In order to complete the procedures, you can either use the
ZN051
Abrites Distribution Box or direct connection to AVDI. When using DS-BOX connect DB25 connector and DB15 connector of CB030 to DS-BOX. When using a direct connection to AVDI, connect the DB25 connector of the CB030 to the AVDI, and the DB15 connector of the CB030 to the black DB15 adapter with switch for ignition. This adapter is then connected to a 12V power supply via DC connector, the
ZN074
is ideal for this purpose.
An AVDI with an active AMS is required to complete the procedures.
ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!
