Malibu – Access Control Extension Panel – 4 Doors – UL Listed

$696.00

This UL Listed panel control 4 doors via RFID card access and managed by the easy-to-use Malibu access control module. It is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output. Mounting magnets are included to accommodate screws and nylon standoffs to allow for mounting various boards/accessories in any metal enclosure or back plane.

Description

This UL Listed panel control 4 doors via RFID card access and managed by the easy-to-use Malibu access control module. It is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output. Mounting magnets are included to accommodate screws and nylon standoffs to allow for mounting various boards/accessories in any metal enclosure or back plane.

**Back up battery not included**

Note: Must have the UL Listed 4 door controller with module
(MAC-004-ALCM)
to use this extension. The 4 door controller with module controls the first 4 doors and this extension allows you to add 4 additional doors either in the same or different location. (additional multiples of 4 doors require an extension for each set.)

Each door requires a
Monthly Licencse Fee Per Door
Please be sure to manually add a monthly subscription for each door needed. 

Now this Module has Mobile Credentials.  The mobile credential can be setup with the same access level as a normal RFID card.  Download the ”
Malibu Mobile Credentia
l
“app to use your phone for access control.  It doesn’t use Bluetooth.  It’s the most simple yet secure mobile credential on the market. 

Features:

Input 115VAC, 60Hz, 3.5A

Output 12VDC or 24VDC selectable output

6A continuous supply current

Filtered and electronically regulated output

Short Circuit and thermal overload protection

Built-charger for sealed lead acid or gel type batteries

Automatic switch over to stand-by battery when AC fails

AC fail supervision (form “C” contacts)

Notification trigger is selectable for 30 seconds (factory set) or 6 hours

Low battery supervision (form “C” contacts)

Battery presence supervision (form “C” contacts)

AC input and DC output LED indicators

Operating 
0° C to 49° C (32° F to 120° F)

Storage 
– 20° C to 70°C ( – 4° F to 158° F)

Relative Humidity 85% +/- 5% (BTU/Hr[approx] 12VDC: 37 BTU/Hr, 24VDC: 74 BTU/Hr)

System AC input VA requirement: 402.5VA

Wall mount enclosure for indoor use

Accommodates up to two (2) 12VDC/7AH Batteries

Dimensions 13″W x 13.5″H x 3.25″D (330mm W x 343mm H x 83mm D)

1/2″ and 3/4″ combination knockouts

Customize the metal enclosure or back plane to accommodate power supplies, distribution boards, access controllers, and accessories

Easy, fast installation saves time and labor – no drilling required

Can be reused and re-positioned

Zinc alloy cover eliminates the possibility of EMI/RFI

26 lbs max strength

23.2mm (1″) diameter cup, 6.5 mm hole size

Includes hardware (screws and standoffs)

Specifications:

PCB Board Size

 160 x 106mm (6.3 x 4.17 in)

Case Size

273 x 228 x 65 mm (10.75 x 8.98 x 2.56 in)

Power Supply

12V DC 4-7A

Power Consumption of Circuit Board

<100mA Doors Controlled 8 doors with MAC-004-ALCM Door Opening Time Extending Setting  1-600 seconds (adjustable) Operation Temperature -40 ℃~70 ℃ (-40ºF~158 ºF ) Operation Humidity 10-90% R, No condensation Quantity of users 20,000 Quantity of Event Buffers (offline) 100,000 event buffers Power interruption protection measure High speed memory, records never lost Max Distance from reader to controller 100m or 328ft (suggested distance 80m or 262 ft) Max distance between controllers  TCP/IP: Depends on net coverage area Alarm  Alarm for door open for extended time, illegal break in, intimidate Unlock  Based on internal and external validation   Package Includes:  1 x Access Control Board 1 x Power Supply 1 x panel Enclosure 4 x mounting Magnets Downloads: Panel and Power Supply 4 Door Controller Board Installation Instructions