Description
This is an
Autohex II BMW Full Package
This tool covers most diagnostic and programming for BMW vehicles.
What you get:
Autohex II Hardware WVCI HW 5 (Main Unit)
BMW Software Standard License
HexProg Programmer
Free 30 Days Chip Tuning License for HexProg
MPC Module
EEPROM Module
JTAG Module
Power Module
OBD Cable
BDM Cable
Tricore Cable
FEM Cable
USB Cable
BMW Ecu Online Programming License
BMW Key Programming License
BMW Software ISN Boot Mode License
BMW ISTA/D driver to run dealer software
1 year technical support
1 year hardware manufacturer warranty
Hexprog Portal
Hexprog users can use this portal to get support by Microtronik’s ticketing support system, access online services and to manage their Hexprog License.
This is a demo account, you can use it to check what real users can see
Go to
Hexprog Portal
Login Page
Use
hexprog.demo@microtronik.
com
as the user name
Use
micro^tronik
as the password
Purchase the Tuning/Cloning License
: USD 1500.00 for license (one time payment) and yearly subscription is USD 350.00 — (30 Day Free Trial Included Free)
Lease the License for 48 hours
: Hexprog users can activate a fully functioning license for 48 hours from their account in www.hexprog.com or in the Hexprog Portal.
Purchases can be made from your account in
www.hexprog.com
or in the
Hexprog Portal
.
Using this kit you can do following:
Read and Write All ISN in F Series:
Autohex II reads and writes all ISN of DME/DDE in F series:
EDC17C41
EDC17C41
EDC17C50
EDC17C56
EDC17C76
EDC17CP09
EDC17CP45
EDC17CP49
MEVD17.2
MEVD17.2.3
MEVD17.2.4
MEVD17.2.5
MEVD17.2.6
MEVD17.2.8
MEVD17.2.9
MEVD17.2.G
MEVD17.2.H
MEVD17.2.P
Read and Write All Long ISN in E Series:
Autohex II reads all ISN of DME/DDE in E series:
EDC17C06
EDC17C41
EDC17C50
EDC17C56
EDC17C76
EDC17CP02
EDC17CP09
EDC17CP45
EDC17CP49
MSV80
MSV80.1
MSD80
MSD81
MSD85
MSD85Y
MSS60
MED17.2
MEV17.2
MEV17.2.2
MEVD17.2
MEVD17.2.2
MEVD17.2.7
MEV1746
MEVD17.2.4
MEVD17.2.5
MEVD17.2.9
Read most of old ISN in E Series:
Autohex II reads the ISN of DME/DDE in E series:
EDC16C1
EDC16C31
EDC16C35
EDC16CP35
ME9
ME9.2
ME9.2.2
MEV9.2
MSV70
MS45
Individual Programming for any ECU (DOIP Protocol)
Autohex II is the most advanced tool for BMW Ecu programming, it supports E series, F Series and G Series
CAS1, CAS2, CAS3, CAS3+, CAS4 and CAS4+ ISN
With Autohex II you can read and write ISN from all CAS versions in E and F series
Read ISN from all Trciore DME/DDE by boot mode
This function is important when the DME/DDE is not responding, and you need the ISN for replacment
BMW E series EGS ISN matching with CAS
You can reset EWS security from all BMW E series EGS by OBD
BMW F series EGS EWS Reset for 6HP and 8HP models
You can reset EWS in EGS 6HP (On Bench) and 8HP by OBD or On Bench
BMW E series, F series, and G series Auto Coding
Autohex II calculates the required coding data automatically from the car vehicle order, then it applies these data to the target module
Manual Coding in E Series and F Series
You can modify the Ecu coding to add and remove features in any Ecu in BMW cars
Managing the Vehicle Order (FA) in BMW cars
You can modify the Vehicle Order to do retrofit the configuraion. You can also backup and restore the FA from the backup ECU
Key Programming For E and F series
CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM and BDC are supported by Autohex II, this includes if all keys lost
Unlock Security from CAS4, CAS4+, FEM and BDC
You can unlock secrity of CAS4/4+, BDC and FEM to able to:
Change CAS and BDC and FEM VIN
Change CAS and BDC and FEM ISN
Mileage Reset for CAS and BDC and FEM
Making a key for CAS and BDC and FEM
Read and Write ISN on Bench for MSX8X
With Autohex II you can read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the ECU
Read ISN in G Series:
MD1 and MG1 (MDG1) ISN Reading of following DME/DDE (writing is possible for some DMEs):
DME_840
DME_840H
DME_84T0
DME_860
DME_86T0
DME_880
DME_88T0
DDE803P
DDE832C
Read and Write ISN in MD1 and MG1 F Series:
MD1 and MG1 (MDG1) ISN Reading of following DME/DDE:
DME_83T1
DME_840
DME_841
DME_841H
DME_861
DME_88T0
DDE803
Indivedual Programming for any Ecu (DOIP Protocol)
Autohex II is the most advanced tool for BMW ECU programming, it supports E series, F Series and G Series
Manual Coding in E Series and F Series
You can modify the Ecu coding to add and remove features in any ECU in BMW cars
FEATURES
INCLUDED IN THIS PACKAGE
Autohex
Online Ecu Programming
YES
Ecu Coding
YES
Ecu Advanced Coding
YES
Read ISN DME and CAS
YES
Write ISN DME and CAS
YES
Read ISN From EGS 6HP/8HP
YES
Reset EGS EWS 6/8 HP
YES
DME ISN By Boot Mode
YES
Vehicle Order (FA) Manager
YES
Read CAS2,3,4,4+ Flash (BDM)
YES
CAS1,2,3,4 Key Programming
YES
FEM/BDC Key Programming
YES
CAS/FEM/BDC Replacment
YES
CAS4/FEM/BDC Mileage Reset
YES
Hextag Tool Included
YES
Technical Support
1 year (Extendable)
Microtronik Downloads
