Description
This is an
Autohex II BMW Professional Programming Tool
This tool covers ECU programming and coding.
What you get:
Autohex II Hardware WVCI HW 5.
BMW Software Standard License.
BMW Ecu Online Programming License.
BMW Software ISN Boot Mode License.
BMW ISTA/D driver to run dealer software.
OBD Cable
FEM Cable
Tricore Cable
USB Cable
Power Adapter
1 year technical support.
1 year hardware warranty.
Using this kit you can do following:
Read ISN in G Series:
MD1 and MG1 (MDG1) ISN Reading of following DME/DDE (writing is possible for some DMEs):
DME_840
DME_840H
DME_84T0
DME_860
DME_86T0
DME_880
DME_88T0
DDE803P
DDE832C
Read and Write ISN in MD1 and MG1 F Series:
MD1 and MG1 (MDG1) ISN Reading of following DME/DDE:
DME_83T1
DME_840
DME_841
DME_841H
DME_861
DME_88T0
DDE803
Read and Write All ISN in F Series:
Autohex II reads and writes all ISN of DME/DDE in F series:
EDC17C41
EDC17C41
EDC17C50
EDC17C56
EDC17C76
EDC17CP09
EDC17CP45
EDC17CP49
MEVD17.2
MEVD17.2.3
MEVD17.2.4
MEVD17.2.5
MEVD17.2.6
MEVD17.2.8
MEVD17.2.9
MEVD17.2.G
MEVD17.2.H
MEVD17.2.P
Read and Write All Long ISN in E Series:
Autohex II reads all ISN of DME/DDE in E series:
EDC17C06
EDC17C41
EDC17C50
EDC17C56
EDC17C76
EDC17CP02
EDC17CP09
EDC17CP45
EDC17CP49
MSV80
MSV80.1
MSD80
MSD81
MSD85
MSD85Y
MSS60
MED17.2
MEV17.2
MEV17.2.2
MEVD17.2
MEVD17.2.2
MEVD17.2.7
MEV1746
MEVD17.2.4
MEVD17.2.5
MEVD17.2.9
Read most of old ISN in E Series:
Autohex II reads the ISN of DME/DDE in E series:
EDC16C1
EDC16C31
EDC16C35
EDC16CP35
ME9
ME9.2
ME9.2.2
MEV9.2
MSV70
MS45
Individual Programming for any Ecu (DOIP Protocol)
Autohex II is the most advanced tool for BMW Ecu programming, it supports E series, F Series and G Series
CAS1, CAS2, CAS3, CAS3+, CAS4 and CAS4+ ISN
With Autohex II you can read and write ISN from all CAS versions in E and F series
Read ISN from all Trciore DME/DDE by boot mode
This function is important when the DME/DDE is not responding, and you need the ISN for replacment
BMW E series EGS ISN matching with CAS
You can reset EWS security from all BMW E series EGS by OBD
BMW F series EGS EWS Reset for 6HP and 8HP models
You can reset EWS in EGS 6HP (On Bench) and 8HP by OBD or On Bench
BMW E series, F series, and G series Auto Coding
Autohex II calculates the required coding data automatically from the car vehicle order, then it applies these data to the target module
Managing the Vehicle Order (FA) in BMW cars
You can modify the Vehicle Order to do retrofit the configuraion. You can also backup and restore the FA from the backup ECU
Unlock Security from CAS4, CAS4+, FEM and BDC
You can unlock secrity of CAS4/4+, BDC and FEM to able to:
Change CAS and BDC and FEM VIN
Change CAS and BDC and FEM ISN
Mileage Reset for CAS and BDC and FEM
Making a key for CAS and BDC and FEM
Read and Write ISN on Bench for MSX8X
With Autohex II you can read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the ECU
Specifications Table:
Online Ecu Programming
YES
Ecu Coding
YES
Ecu Advanced Coding
YES
Read ISN DME and CAS
YES
Write ISN DME and CAS
YES
Read ISN From EGS 6HP/8HP
YES
Reset EGS EWS 6/8 HP
YES
DME ISN By Boot Mode
YES
Vehicle Order (FA) Manager
YES
Read CAS2,3,4,4+ Flash (BDM)
NO
CAS1,2,3,4 Key Programming
NO
FEM/BDC Key Programming
NO
CAS4/FEM/BDC Mileage Reset
YES
CAS/FEM/BDC Replacment
YES
Hextag Tool Included
NO
Technical Support
1 year (Extendable)
Microtronik Downloads