Norton – 6011 – Low Energy Door Operator – Pull Side – Rigid Arm & Slide Track – Aluminum

$4,601.25

The 6000 Series low energy operator is a heavy-duty unit designed for rigorous, high-use applications. Built-in intelligence enables the operator to safeguard users while providing better door control. Simple installation and adjustment features combined with the unit’s high level of versatility allows for seamless integration with a multitude of facilities and systems.

Description

The 6000 Series low energy operator is a heavy-duty unit designed for rigorous, high-use applications. Built-in intelligence enables the operator to safeguard users while providing better door control. Simple installation and adjustment features combined with the unit’s high level of versatility allows for seamless integration with a multitude of facilities and systems.
Features

Adjustable Hold Open – Amount of time a door will stay in the full open position after an activation

Blow open for smoke ventilation – Door opens when signal is received from alarm system allowing air or smoke to flow through opening. Door will stay open until signal from alarm system is stopped

Infinite Hold Open – Door will hold open at set position until power is turned off

Obstruction Detection – Open: door closes if it hits an obstruction while opening. Close: door reopens (once) if it hits an obstruction while closing. If it hits the obstruction again, the door will rest against the obstruction until it is removed

Open Delay – Delays operator opening for locking hardware

Overload Safety Shut-Off – After 3 minutes of receiving a door activation signal, inverter times out and door closes – Prevents motor/inverter damage

Presence Detector Input – Input for external sensor to detect presence at door open or close position only

Push & Go – As the door is manually opened, the operator “senses” movement and opens door to the full-open position

Selector mode switch – Off: Disables signal inputs unless Blow Open is activated. On: Activates signal inputs. Hold Open: Activates the unit (unless blow closed is activated on 6300) to the hold open position

Two Selectable Output relay – Multi-function relay outputs

Vestibule Delay – When the push button is pressed, first door in vestibule will open. Second door will open once vestibule door delay has expired. Delay is adjustable

ANSI/BHMA A156.19 certified & ADA Compliant

Specifications

Construction

Heavy-Duty cast-aluminum body

Function

Hydraulic Electronic Door Operator

Interior or Exterior

Both

Handing

Non-Handed

Power Input

120 VAC, 60Hz

Power Supply

24 VDC (1.3A)

Finish

689 – Aluminum

Maximum Door Weight

250lbs

Door Width

36″ – 48″

Housing Projection

4-3/4″

Housing Height

5-3/16″

Housing Length

37-1/2″

Mounting Style

Pull Side

Max. Door Opening

110 Degrees

Certifications

» ANSI/BHMA A156.19 certified
» ETL tested to UL / cUL standards for automatic doors used on fire and smoke barrier doors and CSA C22.2 No. 247 for operators and systems of doors
» UL10C listed for positive pressure fire test
» Comply with requirements for the Americans with Disabilities Act (A.D.A)
» California State Fire Marshall Listing 3266- 0944:0110
» Manufactured in an ISO 9001 and ISO 14001 facility
» Verified by Green Circle to offer the following energy savings as compared to similar products:
» 19% efficiency
» Health product declaration and UL certified environmental product declaration

Warranty

2-Year Limited Warranty

Downloads

Data Sheet

Installation Guide