Description
The
Pemko 315CN
door sweep with EPDM insert is applied to the bottom face surface of a door to prevent air, sound, smoke, insects, rodents, and water from entering a room.
Commonly used on the exterior of outswing doors in conjunction
with a saddle threshold.
Specifications:
LENGTH:
36
” (914.4 mm)
WIDTH:
1/4” (6.4 mm)
HEIGHT:
1-11/16″ (42.86 mm)
WEIGHT:
Estimated per foot: 0.15 lbs
MATERIAL:
6063-T6 Aluminum Alloy and Temper
Ratings:
Air Infiltration Tested
– Tested to ASTM E-283-04 (2012) for low air leakage allowance; allows no more than 0.3 cfm per square foot at 1.57 psf.
Sound Tested
– Tested to ASTM E90 – 2009 in a single or in multiple sound seal configurations for sound attenuation in an opening
Smoke Tested
– Tested to UL 1784 and meets the requirements of NFPA 105-2013 for smoke leakage in an opening; allows no more than 3.0 cfm per square foot at 0.10” water column (about 75 Pa).
Fire Rated
– Tested to UL10B Standard Fire Tests and UL10C Positive Pressure Fire Tests of Door Assemblies
BHMA Certified
– Tested for performance with regards to the requirements in: ANSI/BHMA A156.22 – Door Gasketing and Edge Seal Systems
Downloads:
Category Specification
Installation Instructions
Cut sheet
Tech sheet
