Description
Rosslare’s AY-H25B is a reliable reader capable of reading MIFARE Classic® EV1 smart card Contactless cards utilizing any standard access control system. With 7 selectable output formats, it is suited to most existing systems by reading only the required information from the card. The AY-H25B reader is fully potted, sealed, and made of rigid, UV resistant poly-carbonate housing, which make them highly suitable for outdoor use. This reader is a very simple, reliable, and cost-effective way to upgrade your system to the smart card standard. The AY-H25B series of readers are compatible with a variety of Rosslare’s controllers as well as with many third party systems.
Features
Incorporates the ISO-14443A MIFARE Classic EV1 ID Format Protocol
Read range between of 6 to 7 cm (2.4 to 2.8 in.)
Programmable output formats including standard Wiegand 26-Bit
Selectable LED control and buzzer control functions
Made of tough Polycarbonate plastic for improved performance in all weather conditions
Optical back tamper detection
Internal buzzer
PC software and programming adapter (MD-08B) for easy configuration
Weather Resistant
Specifications:
Operating Voltage Range:
5-16 VDC, from a regulated power supply
Standby/Max Input Current:
35 mA / 55 mA
Tamper Output:
Open collector, active low, max. sink current 16 mA
Inputs:
Programmable LED and buzzer control inputs, N.O, Dry Contact
Indicators:
Tri-colored LED indicators
Output Format:
Selectable transmission formats: Wiegand 26-Bit w/site code, Fixed 26-bit, 32-Bit, 32-Bit reversed, 34-Bit, 40-Bit and Clock & Data
Proximity Card Reader:
MIFARE Classic EV1 Compatible ISO-14443A Range also depends on electrical environment and proximity to metal.
Max. Read Range:
70 mm (2.8 in.)
Design:
Epoxy-potted, fully-sealed in a rugged polycarbonate enclosure. Suitable for harsh environments.
Dimensions:
4.3 x 3.0 x 0.6 in.
Product Warranty:
5-Year Limited Product Warranty
Device Certifications:
IP65
Downloads:
Spec Sheet
Installation Guide
