Description
The
ROS-MD-IO84B
is a plug-in expansion module for Rosslare’s AC-225x-B and AC-425x-B Access Control Panels. This I/O expansion board provides 8 Supervised Outputs with EOL (End-Of Line) resistor protection, and 4 Relay Outputs (5 Amp Form C NO/NC). Installation of the module takes under 1 minute with the tailored expansion port in the panels and auto-recognize by the panel. Once it is installed and the panel is powered on, the expansion can be seen by the AxTraxNG Server, and the MD-IO84B may be programmed for Access Control and Automation. Advanced communication with the controller, allows for Firmware update, and real-time event logging with support for full offline operation by the host panel.
Main Features:
Eight additional supervised inputs
Four additional fully programmable relay outputs
LED status feedback for 12 V power and relay activation
Cost effective and simple installation
Compatible with Rosslare’s AC-225x-B, AC-425x-B networked access control panels
Input and output configurability using Rosslare’s AxTraxNG™ Server software (Version 27.5.7.x and above)
Input Voltage
12VDC
Input Current
Standby: 30mA / Maximum: 135 mA
Number of Inputs
8
Number of Outputs
4
Output Relays
5A Form C Relays, NO, NC and COM contacts and Form C Relays
Inputs Voltage
5V DC
Dimensions
100mm L x 75.9mm W x 32.5 D (3.93in. x 2.98 in. x 1.28 in.)
Downloads:
Data Sheet
