Description
ThePD-5PAQ5-output power distribution board centralizes the power sources for access control electronic locking devices, such as electromagnetic locks, sheer locks, electric door strikes, deadbolt locks, and so on. It provides a separate fuse for each output so that problems with one device may be isolated from the other devices. Each output operates in both fail-safe and fail-secure modes. The board includes wet and dry trigger inputs for emergency door activation such as for releasing emergency exit doors. It is also equipped with power failure supervision relays and auxiliary supervision relays.
Five individually PTC-fused outputs
Each output will operate in both fail-safe and fail secure modes
Output fuses rated 1.1 Amps
Individual LED status indicator for each output, power input, and trigger
For 12VDC or 24VDC operation
Power failure supervision relay (3 Amps @ 24VDC)
Auxiliary supervision relay (3 Amps @ 24VDC)
Equipped with dry and wet trigger inputs
Dimensions – 3
9
/
16
“x5
5
/
16
“x1
1
/
16
” (90 x 135 x 27 mm)
Input Voltage
12/24 VDC
Fuse type
PTC
Output Voltage
12 or 24VDC selectable via DIP switch
Adjustable Output Voltage Range
11~15 @ 12VDC setting, via VR switch, 23~26 @ 24VDC setting, via VR switch
Number of Outputs
5
Total Supply Current
5A@12VDC / 2.5A@24VDC
Output fuse rating
1.1A
End-of-Line Resistor (EOL)
Selectable ON (2.2KΩ) or OFF via DIP switch
AC-Fail Relay Delay Timer
Selectable @ 5sec, 5min or 5hr via DIP switch
Supervision Relays
Contact Rating: 3A@24VDC Dry Relay Output
Download:
Datasheet
Manual
