Description
The Toyota G and For Toyota H Chip Vehicle OBD Remote Key Programming Device supports programming both For Toyota G and For Toyota H chip vehicle via OBDII port.Can add a transponder key or remote for Toyota vehicle with Toyota G and H (4D/67/68/72(G)) chip.
NOTE: Not for all key lost
How To Use:
To Add Another Transponder Key
Flip switch on the programmer to the LEFT.
Close all doors.
Insert the original key into the ignition and turn the key to the ON position.
Insert the programmer into the OBDII port. The programmer will beep twice indicating the beginning of the programming process. After a short pause, the programmer will beep several more times and the vehicle’s anti-theft light will illuminate.
Once the anti-theft light turns on, remove the customer’s original key (anti-theft light will flash) and insert the new key into the ignition (DO NOT TURN KEY). Anti-theft light will extinguish when key has been programmed.
To Program New Remote
Flip switch on the programmer to the RIGHT.
Close all doors.
Insert the original key into the ignition and turn the key to the ON position.
Insert the programmer into the OBDII port. The programmer will beep twice indicating the beginning of the programming process. After a short pause, the programmer will beep several more times and the vehicle’s anti-theft light will illuminate.
Open the driver’s door. The programmer will begin beeping.
Press both the LOCK and UNLOCK buttons at the same time on the new remote.
Release both buttons.
Press the LOCK button.
