Description
This is a
Jar of 50 Simply45 S45-1755P ProSeries Shielded External Ground Pass-Through RJ45 Modular Plugs with Bar45 & Cap45
for 23AWG Solid, FPE Insulated 10G (Cat7a/7/6a) & 23AWG Solid, PE Insulated Cat6/6a STP LAN cables.
The
Simply45 ProSeries
S45-1755P Pass-Through RJ45 modular plugs are by far the highest performing, easiest to use, and most cost-effective way to professionally terminate 10G Shielded and other large diameter shielded LAN cables. The S45-1755P are IEEE 802.3 10GBase-T compliant and are recommended for shielded 10G LAN Cables Cat7a/7/6a with FPE insulated wires, and Large OD Shielded LAN cables with PE insulated wires such as Cat6 STP and Cat6a F/UTP. These plugs include some unique features that simplify the RJ45 10G termination process and improves the terminated plug performance.
Simply45 ProSeries
introduces the exclusive Cap45. Cap45 is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45 prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45, any electrical risks associated with exposed wire ends are now eliminated completely. Cap45 is a MUST HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.
Features
Two-Piece Plug
Bar45 Load Bar
Cap45 Isolation Cap/Bar
3 Prong Pin Design with 50µ of True 24ct Gold Plating
High/Low Staggered Wire Insert
Accommodates Large Diameter Shielded LAN Cables
Improved Crosstalk Performance
Commercial Rated
Color Tinted RJ45 Modular Plugs
Wide Mouth Jar for Easy Hand Access
Color-Coded Jar Caps
UL Listed
PoE/PoH Rated
Compliant with Industry Standards
Lifetime Warranty
Specifications
Performance:
Meets or Exceeds ANSI/TIA 568-D.2; ISO/IEC 11801 Class D; ANSI/TIA 1096-A; IEC 60603-7
Wire Cond(s) OD:
23AWG: 1.15mm-1.35mm (0.045”-0.053”)
Max LAN Cable OD:
8mm (0.315”)
Supports PoE/PoH:
Yes
Cable Fire Resistance Ratings:
Commercial Rated, CMP, CMR, CM, CMX, LSZH up to B2ca EuroClass
Flame Autoextinguish:
UL 94V-0, IEC 60695-11-10
Contact Material:
Phosphor Bronze – .012″ thick
Contact Plating:
Min 50 Micro-Inch Pure Gold – 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch Min Nickel Plating. Exceeds ANSI/TIA-1096-A specifications (formerly FCC Part 68)
Plug Material:
Polycarbonate
Shielded Material:
Hard Brass
Shielded Plating:
80 Micro-Inch minimum Nickel Plating
Plug Tolerances and Dimensions:
Meets ANSI/TIA-1096-A specifications (formerly FCC Part 68)
Conductor Type(s):
Solid and Stranded
Operating Temperature:
-40º C to +70º C
Insertion/Extraction Life:
2000 Minimum Cycles
Contact Resistance:
20 Milli-Ohms max
Current/Voltage:
30 VAC/42 VDC at 1.5 Amps
Compliance:
UL Listed, RoHS, FCC, NEC
EAN/UPC:
817777017731
Downloads
Data Sheet
Termination Instructions
