Description
The Command Access MLRK1-KAWP is a cost-effective and straightforward way to upgrade your Kawneer Paneline series device to motor-driven latch retraction in the field. UL Listed. The next-generation electromechanical drive offers superior performance to its predecessor. It utilizes a patent pending custom ball screw assembly and CAT-designed customer stepper motor to provide remarkably efficient and reliable results. Since the kit retracts the push pad, the device can be electrically dogged allowing the device to remain in push/pull state, for as long as is desired. Patent pending push-to-start (PTS) Technology allows for an easy post-installation adjustment of the latch/latches. Last but not least , features an updated MM4 module with 2 different torque settings from energy-conscious to high torque to solve difficult jobs. Only one hole needs to be drilled and it’s the raceway! It utilizes our PTS “Push to set” technology making post-installation adjustments incredibly easy.
Features:
MM4 Smart Module Onboard diagnostics with audible feedback for adjustment and power issues
“PT5” 5 second electronic adjustment for easy post-installation adjustment
Electric dogging rated for continuous duty-Auto re-engage if push pad is pulled from dogged position
Low current draw-field switchable to a “low current” or “high torque” mode
Up to 300″ wire run with 2-18ga wire- Long wire runs allow the installer to place the Command locking hardware power supply in a centralized location; i.e., the same closet as the access control panel.
8′ cable with quick connection for MM4 module to connect to power supply lead easily.
3-Year “No Hassle” Warranty
Manufacturer Parent
Command Access
For Use With
Kawneer Paneline Series
Function
Latch Retraction Kit
Sub-Series
MLRK1-KAWP-REX
ADA Compliant
No
Function Family
Part/Component
Standards
UL Listed
Voltage
24 to 25.3 VDC
Product Type
Electronic Part/Accessory
Wire Gauge
18 Gauge
Product Length
300 Feet
Warranty
3 year
Included Components
60417 MLRK1 Motor; 50944 Molex Pigtail; 50030 6 Feet Power Cable; 60708/51186 MM4T Remote Module; 51198 Remote Module Cable; 40059 X2 Cable Mounting Pad; 40060 X2 Cable Ties; 40306 Phillips Screws X4
Standard
Average Current Peak: 1.3A, Average Current Hold: 215mA
System Protection
Unit shutdown when voltage exceeds 28VDC
PTS adjustment
approximately 1/4″
High Torque
Average Current Peak: 2A, Average Current Hold: 250mA
Must be used with a CAT Power Supply
PS210/220/440B
Wire Run
300′ with 18ga wire
Device Cutdown Details
Installed in-between activating brackets
Downloads:
Spec sheet
Installation guide
